[PATCH v2 0/5] arm64: Initial support for Texas Instruments AM642 Platform

[Dave Gerlach]

This is v2 of the series to add initial support for the latest new SoC,
AM642, from Texas Instruments. Version 1 can be found at [1]. Additional
detail can be found in the patch descriptions, also see AM64X Technical
Reference Manual (SPRUIM2, Nov 2020) for further details:
https://www.ti.com/lit/pdf/spruim2

Since v1, several new bindings have made it in linux-next so we can
now include those nodes using them here. The spi, i2c, and mmc nodes
have now been added along with DMA support. Specifics about changes
from v1 are included with each patch.

Regards,
Dave

[1] https://lore.kernel.org/linux-arm-kernel/20201125052004.17823-1-d-gerlach@ti.com/

Dave Gerlach (4):
  dt-bindings: arm: ti: Add bindings for AM642 SoC
  dt-bindings: pinctrl: k3: Introduce pinmux definitions for AM64
  arm64: dts: ti: Add support for AM642 SoC
  arm64: dts: ti: Add support for AM642 EVM

Peter Ujfalusi (1):
  arm64: dts: ti: k3-am64-main: Enable DMA support

 .../devicetree/bindings/arm/ti/k3.yaml        |   6 +
 arch/arm64/boot/dts/ti/Makefile               |   2 +
 arch/arm64/boot/dts/ti/k3-am64-main.dtsi      | 406 ++++++++++++++++++
 arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi       |  76 ++++
 arch/arm64/boot/dts/ti/k3-am64.dtsi           | 103 +++++
 arch/arm64/boot/dts/ti/k3-am642-evm.dts       | 258 +++++++++++
 arch/arm64/boot/dts/ti/k3-am642.dtsi          |  65 +++
 include/dt-bindings/pinctrl/k3.h              |   5 +-
 8 files changed, 920 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am64-main.dtsi
 create mode 100644 arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi
 create mode 100644 arch/arm64/boot/dts/ti/k3-am64.dtsi
 create mode 100644 arch/arm64/boot/dts/ti/k3-am642-evm.dts
 create mode 100644 arch/arm64/boot/dts/ti/k3-am642.dtsi

-- 
2.28.0