[PATCH v4 5/5] pwm: rockchip: Enable clock before calling clk_get_rate()

Simon South simon at simonsouth.net
Tue Jan 19 11:12:09 EST 2021


The documentation for clk_get_rate() in include/linux/clk.h states the
function's result is valid only for a clock source that has been
enabled. However, the Rockchip PWM driver uses this function in two places
to query the rate of a clock without first ensuring it is enabled.

Fix this by modifying rockchip_pwm_get_state() and rockchip_pwm_apply() so
they enable a device's PWM clock before querying its rate (in the latter
case, the querying is actually done in rockchip_pwm_config()) and disable
the clock again before returning.

Reported-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
Signed-off-by: Simon South <simon at simonsouth.net>
---
 drivers/pwm/pwm-rockchip.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/pwm/pwm-rockchip.c b/drivers/pwm/pwm-rockchip.c
index 228147e9bc6e..6ad7d0a50aed 100644
--- a/drivers/pwm/pwm-rockchip.c
+++ b/drivers/pwm/pwm-rockchip.c
@@ -72,6 +72,10 @@ static void rockchip_pwm_get_state(struct pwm_chip *chip,
 	if (ret)
 		return;
 
+	ret = clk_enable(pc->clk);
+	if (ret)
+		return;
+
 	clk_rate = clk_get_rate(pc->clk);
 
 	tmp = readl_relaxed(pc->base + pc->data->regs.period);
@@ -90,6 +94,7 @@ static void rockchip_pwm_get_state(struct pwm_chip *chip,
 	else
 		state->polarity = PWM_POLARITY_NORMAL;
 
+	clk_disable(pc->clk);
 	clk_disable(pc->pclk);
 }
 
@@ -189,6 +194,10 @@ static int rockchip_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 	if (ret)
 		return ret;
 
+	ret = clk_enable(pc->clk);
+	if (ret)
+		return ret;
+
 	pwm_get_state(pwm, &curstate);
 	enabled = curstate.enabled;
 
@@ -208,6 +217,7 @@ static int rockchip_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 	}
 
 out:
+	clk_disable(pc->clk);
 	clk_disable(pc->pclk);
 
 	return ret;
-- 
2.30.0




More information about the linux-arm-kernel mailing list