[RESEND PATCH v3 2/2] usb: dwc3: Add driver for Xilinx platforms

[Felipe Balbi]

Hi,

Michael Grzeschik <mgr at pengutronix.de> writes:
> On Tue, Dec 15, 2020 at 12:24:51PM +0530, Manish Narani wrote:
>>Add a new driver for supporting Xilinx platforms. This driver is used
>>for some sequence of operations required for Xilinx USB controllers.
>>This driver is also used to choose between PIPE clock coming from SerDes
>>and the Suspend Clock. Before the controller is out of reset, the clock
>>selection should be changed to PIPE clock in order to make the USB
>>controller work. There is a register added in Xilinx USB controller
>>register space for the same.
>
> I tried out this driver with the vanilla kernel on an zynqmp. Without
> this patch the USB-Gadget is already acting buggy. In the gadget mode,
> some iterations of plug/unplug results to an stalled gadget which will
> never come back without a reboot.
>
> With the corresponding code of this driver (reset assert, clk modify,
> reset deassert) in the downstream kernels phy driver we found out it is
> totaly stable. But using this exact glue driver which should do the same
> as the downstream code, the gadget still was buggy the way described
> above.
>
> I suspect the difference lays in the different order of operations.
> While the downstream code is runing the resets inside the phy driver
> which is powered and initialized in the dwc3-core itself. With this glue
> layser approach of this patch the whole phy init is done before even
> touching dwc3-core in any way. It seems not to have the same effect,
> though.
>
> If really the order of operations is limiting us, we probably need
> another solution than this glue layer. Any Ideas?

might be a good idea to collect dwc3 trace events. Can you do that?

-- 
balbi