[PATCH 2/3] arm64: dts: rockchip: rename thermal subnodes for rk3368.dtsi

Johan Jonker jbx6244 at gmail.com
Sun Jan 17 10:09:52 EST 2021


A test with the command below gives for example this error:
/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dt.yaml:
thermal-zones: 'cpu', 'gpu' do not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-]{1,12}-thermal$', 'pinctrl-[0-9]+'

Make the rk3368 thermal subnode names in line with the rest of
the Rockchip dts files. Add a label and rename them so that it ends
with "-thermal"

make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/
thermal/thermal-zones.yaml

Signed-off-by: Johan Jonker <jbx6244 at gmail.com>
---
 arch/arm64/boot/dts/rockchip/rk3368.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
index dad1a00e6..cd8274a35 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
@@ -400,7 +400,7 @@
 	};
 
 	thermal-zones {
-		cpu {
+		cpu_thermal: cpu-thermal {
 			polling-delay-passive = <100>; /* milliseconds */
 			polling-delay = <5000>; /* milliseconds */
 
@@ -444,7 +444,7 @@
 			};
 		};
 
-		gpu {
+		gpu_thermal: gpu-thermal {
 			polling-delay-passive = <100>; /* milliseconds */
 			polling-delay = <5000>; /* milliseconds */
 
-- 
2.11.0




More information about the linux-arm-kernel mailing list