[PATCH 1/3] dt-bindings: usb: update snps,dwc3.yaml references

Mauro Carvalho Chehab mchehab+huawei at kernel.org
Thu Jan 14 01:25:58 EST 2021


Changeset 389d77658801 ("dt-bindings: usb: Convert DWC USB3 bindings to DT schema")
renamed: Documentation/devicetree/bindings/usb/dwc3.txt
to: Documentation/devicetree/bindings/usb/snps,dwc3.yaml.

Update its cross-references accordingly.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei at kernel.org>
---
 Documentation/devicetree/bindings/usb/dwc3-st.txt    | 2 +-
 Documentation/devicetree/bindings/usb/exynos-usb.txt | 2 +-
 Documentation/devicetree/bindings/usb/omap-usb.txt   | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/usb/dwc3-st.txt b/Documentation/devicetree/bindings/usb/dwc3-st.txt
index df0e02e1ee43..ad526e76f2a8 100644
--- a/Documentation/devicetree/bindings/usb/dwc3-st.txt
+++ b/Documentation/devicetree/bindings/usb/dwc3-st.txt
@@ -31,7 +31,7 @@ See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
 Sub-nodes:
 The dwc3 core should be added as subnode to ST DWC3 glue as shown in the
 example below. The DT binding details of dwc3 can be found in:
-Documentation/devicetree/bindings/usb/dwc3.txt
+Documentation/devicetree/bindings/usb/snps,dwc3.yaml
 
 NB: The dr_mode property described in [1] is NOT optional for this driver, as the default value
 is "otg", which isn't supported by this SoC. Valid dr_mode values for dwc3-st are either "host"
diff --git a/Documentation/devicetree/bindings/usb/exynos-usb.txt b/Documentation/devicetree/bindings/usb/exynos-usb.txt
index 6aae1544f240..f7ae79825d7d 100644
--- a/Documentation/devicetree/bindings/usb/exynos-usb.txt
+++ b/Documentation/devicetree/bindings/usb/exynos-usb.txt
@@ -93,7 +93,7 @@ Sub-nodes:
 The dwc3 core should be added as subnode to Exynos dwc3 glue.
 - dwc3 :
    The binding details of dwc3 can be found in:
-   Documentation/devicetree/bindings/usb/dwc3.txt
+   Documentation/devicetree/bindings/usb/snps,dwc3.yaml
 
 Example:
 	usb at 12000000 {
diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt b/Documentation/devicetree/bindings/usb/omap-usb.txt
index 38d9bb8507cf..f0dbc5ae45ae 100644
--- a/Documentation/devicetree/bindings/usb/omap-usb.txt
+++ b/Documentation/devicetree/bindings/usb/omap-usb.txt
@@ -65,7 +65,7 @@ Sub-nodes:
 The dwc3 core should be added as subnode to omap dwc3 glue.
 - dwc3 :
    The binding details of dwc3 can be found in:
-   Documentation/devicetree/bindings/usb/dwc3.txt
+   Documentation/devicetree/bindings/usb/snps,dwc3.yaml
 
 omap_dwc3 {
 	compatible = "ti,dwc3";
-- 
2.29.2




More information about the linux-arm-kernel mailing list