[PATCH v4 0/4] Initial support for phyBOARD-Pollux i.MX8MP

[Shawn Guo]

On Thu, Jan 07, 2021 at 10:12:07AM +0100, Teresa Remmet wrote:
> Fourth version for the initial support for the SoM phyCORE-i.MX8MP
> and the carrier board phyBOARD-Pollux.
> 
> Changes in v4:
> - resolved defconfig conflict adding PCA9532 during rebase to v5.11-rc2
> - removed unneeded status properties in device trees
> - removed upstream not available i2c rtc property
> - fixed i2c rtc trickle-resistor value
> 
> Changes in v3:
> - removed deprecated led label property
> - added Reviewed-by and Acked-by tags
> 
> Changes in v2:
> - add rv3028 as module instead of buildin in defconfig
> - updated commit message of rv3028 accordingly
> - changed entries of device tree binding documentation to "const" 
>   and fixed order
> - fixed led dimmer node name
> - removed rtc clock node
> - fixed pmic node name
> - removed reg entries in pmic regulator nodes
> - removed clock entry from rtc node
> - moved muxing of enable gpio for sd-card regulator to the proper node
> - squashed imx8mp-phyboard-pollux.dtsi into imx8mp-phyboard-pollux-rdk.dts
> 
> Teresa
> 
> Teresa Remmet (4):
>   arm64: defconfig: Enable rv3028 i2c rtc driver
>   arm64: defconfig: Enable PCA9532 support
>   bindings: arm: fsl: Add PHYTEC i.MX8MP devicetree bindings
>   arm64: dts: freescale: Add support for phyBOARD-Pollux-i.MX8MP

Applied all, thanks.