[PATCH v2 1/4] clk: sunxi-ng: h6-r: Add R_APB2_RSB clock and reset

Samuel Holland samuel at sholland.org
Sun Jan 3 05:00:04 EST 2021


While no information about the H6 RSB controller is included in the
datasheet or manual, the vendor BSP and power management blob both
reference the RSB clock parent and register address. These values were
verified by experimentation.

Since this clock/reset are added late, the specifier is added at the end
to maintain the existing DT binding. The code is kept in register order.

Signed-off-by: Samuel Holland <samuel at sholland.org>
---
 drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c      | 5 +++++
 drivers/clk/sunxi-ng/ccu-sun50i-h6-r.h      | 2 +-
 include/dt-bindings/clock/sun50i-h6-r-ccu.h | 2 ++
 include/dt-bindings/reset/sun50i-h6-r-ccu.h | 1 +
 4 files changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c b/drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c
index 50f8d1bc7046..56e351b513f3 100644
--- a/drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c
@@ -91,6 +91,8 @@ static SUNXI_CCU_GATE(r_apb2_uart_clk,	"r-apb2-uart",	"r-apb2",
 		      0x18c, BIT(0), 0);
 static SUNXI_CCU_GATE(r_apb2_i2c_clk,	"r-apb2-i2c",	"r-apb2",
 		      0x19c, BIT(0), 0);
+static SUNXI_CCU_GATE(r_apb2_rsb_clk,	"r-apb2-rsb",	"r-apb2",
+		      0x1bc, BIT(0), 0);
 static SUNXI_CCU_GATE(r_apb1_ir_clk,	"r-apb1-ir",	"r-apb1",
 		      0x1cc, BIT(0), 0);
 static SUNXI_CCU_GATE(r_apb1_w1_clk,	"r-apb1-w1",	"r-apb1",
@@ -130,6 +132,7 @@ static struct ccu_common *sun50i_h6_r_ccu_clks[] = {
 	&r_apb1_pwm_clk.common,
 	&r_apb2_uart_clk.common,
 	&r_apb2_i2c_clk.common,
+	&r_apb2_rsb_clk.common,
 	&r_apb1_ir_clk.common,
 	&r_apb1_w1_clk.common,
 	&ir_clk.common,
@@ -147,6 +150,7 @@ static struct clk_hw_onecell_data sun50i_h6_r_hw_clks = {
 		[CLK_R_APB1_PWM]	= &r_apb1_pwm_clk.common.hw,
 		[CLK_R_APB2_UART]	= &r_apb2_uart_clk.common.hw,
 		[CLK_R_APB2_I2C]	= &r_apb2_i2c_clk.common.hw,
+		[CLK_R_APB2_RSB]	= &r_apb2_rsb_clk.common.hw,
 		[CLK_R_APB1_IR]		= &r_apb1_ir_clk.common.hw,
 		[CLK_R_APB1_W1]		= &r_apb1_w1_clk.common.hw,
 		[CLK_IR]		= &ir_clk.common.hw,
@@ -161,6 +165,7 @@ static struct ccu_reset_map sun50i_h6_r_ccu_resets[] = {
 	[RST_R_APB1_PWM]	=  { 0x13c, BIT(16) },
 	[RST_R_APB2_UART]	=  { 0x18c, BIT(16) },
 	[RST_R_APB2_I2C]	=  { 0x19c, BIT(16) },
+	[RST_R_APB2_RSB]	=  { 0x1bc, BIT(16) },
 	[RST_R_APB1_IR]		=  { 0x1cc, BIT(16) },
 	[RST_R_APB1_W1]		=  { 0x1ec, BIT(16) },
 };
diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-h6-r.h b/drivers/clk/sunxi-ng/ccu-sun50i-h6-r.h
index 782117dc0b28..7e290b840803 100644
--- a/drivers/clk/sunxi-ng/ccu-sun50i-h6-r.h
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-h6-r.h
@@ -14,6 +14,6 @@
 
 #define CLK_R_APB2	3
 
-#define CLK_NUMBER	(CLK_W1 + 1)
+#define CLK_NUMBER	(CLK_R_APB2_RSB + 1)
 
 #endif /* _CCU_SUN50I_H6_R_H */
diff --git a/include/dt-bindings/clock/sun50i-h6-r-ccu.h b/include/dt-bindings/clock/sun50i-h6-r-ccu.h
index 76136132a13e..890368d252c4 100644
--- a/include/dt-bindings/clock/sun50i-h6-r-ccu.h
+++ b/include/dt-bindings/clock/sun50i-h6-r-ccu.h
@@ -21,4 +21,6 @@
 #define CLK_IR			11
 #define CLK_W1			12
 
+#define CLK_R_APB2_RSB		13
+
 #endif /* _DT_BINDINGS_CLK_SUN50I_H6_R_CCU_H_ */
diff --git a/include/dt-bindings/reset/sun50i-h6-r-ccu.h b/include/dt-bindings/reset/sun50i-h6-r-ccu.h
index 01c84dba49a4..7950e799c76d 100644
--- a/include/dt-bindings/reset/sun50i-h6-r-ccu.h
+++ b/include/dt-bindings/reset/sun50i-h6-r-ccu.h
@@ -13,5 +13,6 @@
 #define RST_R_APB2_I2C		4
 #define RST_R_APB1_IR		5
 #define RST_R_APB1_W1		6
+#define RST_R_APB2_RSB		7
 
 #endif /* _DT_BINDINGS_RST_SUN50I_H6_R_CCU_H_ */
-- 
2.26.2




More information about the linux-arm-kernel mailing list