[PATCH v2 2/5] dt-bindings: Amlogic: add the documentation for the SECBUS2 registers

Martin Blumenstingl martin.blumenstingl at googlemail.com
Sat Jan 2 15:59:01 EST 2021


The Meson8/Meson8b/Meson8m2 SoCs have a register bank called SECBUS2 which
contains registers for various IP blocks such as pin-controller bits for
the BSD_EN and TEST_N GPIOs as well as some AO ARC core control bits.
The registers can be accessed directly when not running in "secure mode".
When "secure mode" is enabled then these registers have to be accessed
through secure monitor calls.

So far these SoCs are always known to boot in "non-secure mode".
Add a binding documentation using syscon (as these registers are shared
across different IPs) for the SECBUS2 registers.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
---
 .../arm/amlogic/amlogic,meson-mx-secbus2.yaml | 42 +++++++++++++++++++
 1 file changed, 42 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-mx-secbus2.yaml

diff --git a/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-mx-secbus2.yaml b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-mx-secbus2.yaml
new file mode 100644
index 000000000000..eee7cda9f91b
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-mx-secbus2.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/arm/amlogic/amlogic,meson-mx-secbus2.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Amlogic Meson8/Meson8b/Meson8m2 SECBUS2 register interface
+
+maintainers:
+  - Martin Blumenstingl <martin.blumenstingl at googlemail.com>
+
+description: |
+  The Meson8/Meson8b/Meson8m2 SoCs have a register bank called SECBUS2 which
+  contains registers for various IP blocks such as pin-controller bits for
+  the BSD_EN and TEST_N GPIOs as well as some AO ARC core control bits.
+  The registers can be accessed directly when not running in "secure mode".
+  When "secure mode" is enabled then these registers have to be accessed
+  through secure monitor calls.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - amlogic,meson8-secbus2
+          - amlogic,meson8b-secbus2
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    secbus2: system-controller at 4000 {
+      compatible = "amlogic,meson8-secbus2", "syscon";
+      reg = <0x4000 0x2000>;
+    };
-- 
2.30.0




More information about the linux-arm-kernel mailing list