[PATCH v4 01/14] phy: Add LVDS configuration options

Robert Foss robert.foss at linaro.org
Fri Feb 26 06:52:39 EST 2021


Hey Liu,

Thanks for submitting this series.

This patch looks good to me.
Reviewed-by: Robert Foss <robert.foss at linaro.org>

On Thu, 18 Feb 2021 at 04:56, Liu Ying <victor.liu at nxp.com> wrote:
>
> This patch allows LVDS PHYs to be configured through
> the generic functions and through a custom structure
> added to the generic union.
>
> The parameters added here are based on common LVDS PHY
> implementation practices.  The set of parameters
> should cover all potential users.
>
> Cc: Kishon Vijay Abraham I <kishon at ti.com>
> Cc: Vinod Koul <vkoul at kernel.org>
> Cc: NXP Linux Team <linux-imx at nxp.com>
> Signed-off-by: Liu Ying <victor.liu at nxp.com>
> ---
> v3->v4:
> * No change.
>
> v2->v3:
> * No change.
>
> v1->v2:
> * No change.
>
>  include/linux/phy/phy-lvds.h | 48 ++++++++++++++++++++++++++++++++++++++++++++
>  include/linux/phy/phy.h      |  4 ++++
>  2 files changed, 52 insertions(+)
>  create mode 100644 include/linux/phy/phy-lvds.h
>
> diff --git a/include/linux/phy/phy-lvds.h b/include/linux/phy/phy-lvds.h
> new file mode 100644
> index 00000000..1b5b9d6
> --- /dev/null
> +++ b/include/linux/phy/phy-lvds.h
> @@ -0,0 +1,48 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright 2020 NXP
> + */
> +
> +#ifndef __PHY_LVDS_H_
> +#define __PHY_LVDS_H_
> +
> +/**
> + * struct phy_configure_opts_lvds - LVDS configuration set
> + *
> + * This structure is used to represent the configuration state of a
> + * LVDS phy.
> + */
> +struct phy_configure_opts_lvds {
> +       /**
> +        * @bits_per_lane_and_dclk_cycle:
> +        *
> +        * Number of bits per data lane and differential clock cycle.
> +        */
> +       unsigned int bits_per_lane_and_dclk_cycle;
> +
> +       /**
> +        * @differential_clk_rate:
> +        *
> +        * Clock rate, in Hertz, of the LVDS differential clock.
> +        */
> +       unsigned long differential_clk_rate;
> +
> +       /**
> +        * @lanes:
> +        *
> +        * Number of active, consecutive, data lanes, starting from
> +        * lane 0, used for the transmissions.
> +        */
> +       unsigned int lanes;
> +
> +       /**
> +        * @is_slave:
> +        *
> +        * Boolean, true if the phy is a slave which works together
> +        * with a master phy to support dual link transmission,
> +        * otherwise a regular phy or a master phy.
> +        */
> +       bool is_slave;
> +};
> +
> +#endif /* __PHY_LVDS_H_ */
> diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
> index e435bdb..d450b44 100644
> --- a/include/linux/phy/phy.h
> +++ b/include/linux/phy/phy.h
> @@ -17,6 +17,7 @@
>  #include <linux/regulator/consumer.h>
>
>  #include <linux/phy/phy-dp.h>
> +#include <linux/phy/phy-lvds.h>
>  #include <linux/phy/phy-mipi-dphy.h>
>
>  struct phy;
> @@ -51,10 +52,13 @@ enum phy_mode {
>   *             the MIPI_DPHY phy mode.
>   * @dp:                Configuration set applicable for phys supporting
>   *             the DisplayPort protocol.
> + * @lvds:      Configuration set applicable for phys supporting
> + *             the LVDS phy mode.
>   */
>  union phy_configure_opts {
>         struct phy_configure_opts_mipi_dphy     mipi_dphy;
>         struct phy_configure_opts_dp            dp;
> +       struct phy_configure_opts_lvds          lvds;
>  };
>
>  /**
> --
> 2.7.4
>



More information about the linux-arm-kernel mailing list