[PATCH v1 3/4] clk: rockchip: support more core div setting

Heiko Stübner heiko at sntech.de
Thu Feb 25 04:07:36 EST 2021


Hi Elaine,

Am Donnerstag, 25. Februar 2021, 03:59:32 CET schrieb elaine.zhang:
> 在 2021/2/23 下午6:22, Heiko Stübner 写道:
> > Am Dienstag, 23. Februar 2021, 10:53:51 CET schrieb Elaine Zhang:
> >> A55 supports each core to work at different frequencies, and each core
> >> has an independent divider control.
> >>
> >> Signed-off-by: Elaine Zhang <zhangqing at rock-chips.com>
> >> ---
> >>   drivers/clk/rockchip/clk-cpu.c | 25 +++++++++++++++++++++++++
> >>   drivers/clk/rockchip/clk.h     | 17 ++++++++++++++++-
> >>   2 files changed, 41 insertions(+), 1 deletion(-)
> >>
> >> diff --git a/drivers/clk/rockchip/clk-cpu.c b/drivers/clk/rockchip/clk-cpu.c
> >> index fa9027fb1920..cac06f4f7573 100644
> >> --- a/drivers/clk/rockchip/clk-cpu.c
> >> +++ b/drivers/clk/rockchip/clk-cpu.c
> >> @@ -164,6 +164,18 @@ static int rockchip_cpuclk_pre_rate_change(struct rockchip_cpuclk *cpuclk,
> >>   				     reg_data->mux_core_mask,
> >>   				     reg_data->mux_core_shift),
> >>   		       cpuclk->reg_base + reg_data->core_reg);
> >> +		if (reg_data->core1_reg)
> >> +			writel(HIWORD_UPDATE(alt_div, reg_data->div_core1_mask,
> >> +					     reg_data->div_core1_shift),
> >> +			       cpuclk->reg_base + reg_data->core1_reg);
> >> +		if (reg_data->core2_reg)
> >> +			writel(HIWORD_UPDATE(alt_div, reg_data->div_core2_mask,
> >> +					     reg_data->div_core2_shift),
> >> +			       cpuclk->reg_base + reg_data->core2_reg);
> >> +		if (reg_data->core3_reg)
> >> +			writel(HIWORD_UPDATE(alt_div, reg_data->div_core3_mask,
> >> +					     reg_data->div_core3_shift),
> >> +			       cpuclk->reg_base + reg_data->core3_reg);
> > for (i = 0; i < reg_data->num_cores; i++)
> > 	writel(...)
> >
> >>   	} else {
> >>   		/* select alternate parent */
> >>   		writel(HIWORD_UPDATE(reg_data->mux_core_alt,
> >> @@ -209,6 +221,19 @@ static int rockchip_cpuclk_post_rate_change(struct rockchip_cpuclk *cpuclk,
> >>   				reg_data->mux_core_shift),
> >>   	       cpuclk->reg_base + reg_data->core_reg);
> >>   
> >> +	if (reg_data->core1_reg)
> >> +		writel(HIWORD_UPDATE(0, reg_data->div_core1_mask,
> >> +				     reg_data->div_core1_shift),
> >> +		       cpuclk->reg_base + reg_data->core1_reg);
> >> +	if (reg_data->core2_reg)
> >> +		writel(HIWORD_UPDATE(0, reg_data->div_core2_mask,
> >> +				     reg_data->div_core2_shift),
> >> +		       cpuclk->reg_base + reg_data->core2_reg);
> >> +	if (reg_data->core3_reg)
> >> +		writel(HIWORD_UPDATE(0, reg_data->div_core3_mask,
> >> +				     reg_data->div_core3_shift),
> >> +		       cpuclk->reg_base + reg_data->core3_reg);
> >> +
> > for (i = 0; i < reg_data->num_cores; i++)
> > 	writel(...)
> >
> >>   	if (ndata->old_rate > ndata->new_rate)
> >>   		rockchip_cpuclk_set_dividers(cpuclk, rate);
> >>   
> >> diff --git a/drivers/clk/rockchip/clk.h b/drivers/clk/rockchip/clk.h
> >> index 2271a84124b0..b46c93fd0cb5 100644
> >> --- a/drivers/clk/rockchip/clk.h
> >> +++ b/drivers/clk/rockchip/clk.h
> >> @@ -322,7 +322,7 @@ struct rockchip_cpuclk_clksel {
> >>   	u32 val;
> >>   };
> >>   
> >> -#define ROCKCHIP_CPUCLK_NUM_DIVIDERS	2
> >> +#define ROCKCHIP_CPUCLK_NUM_DIVIDERS	5
> > please move this into a separate patch, as yes the rk3568 needs more
> > dividers but that isn't related to adding separate core divider controls.
> >
> > [...]
> > add
> >
> > #define ROCKCHIP_CPUCLK_MAX_CORES	4
> >
> >>   struct rockchip_cpuclk_rate_table {
> >>   	unsigned long prate;
> >>   	struct rockchip_cpuclk_clksel divs[ROCKCHIP_CPUCLK_NUM_DIVIDERS];
> >> @@ -333,6 +333,12 @@ struct rockchip_cpuclk_rate_table {
> >>    * @core_reg:		register offset of the core settings register
> >>    * @div_core_shift:	core divider offset used to divide the pll value
> >>    * @div_core_mask:	core divider mask
> >> + * @div_core1_shift:	core1 divider offset used to divide the pll value
> >> + * @div_core1_mask:	core1 divider mask
> >> + * @div_core2_shift:	core2 divider offset used to divide the pll value
> >> + * @div_core2_mask:	core2 divider mask
> >> + * @div_core3_shift:	core3 divider offset used to divide the pll value
> >> + * @div_core3_mask:	core3 divider mask
> >>    * @mux_core_alt:	mux value to select alternate parent
> >>    * @mux_core_main:	mux value to select main parent of core
> >>    * @mux_core_shift:	offset of the core multiplexer
> >> @@ -342,6 +348,15 @@ struct rockchip_cpuclk_reg_data {
> >>   	int		core_reg;
> >>   	u8		div_core_shift;
> >>   	u32		div_core_mask;
> >> +	int		core1_reg;
> >> +	u8		div_core1_shift;
> >> +	u32		div_core1_mask;
> >> +	int		core2_reg;
> >> +	u8		div_core2_shift;
> >> +	u32		div_core2_mask;
> >> +	int		core3_reg;
> >> +	u8		div_core3_shift;
> >> +	u32		div_core3_mask;
> > please make this instead like:
> >
> > int	core_reg[ROCKCHIP_CPUCLK_MAX_CORES];
> > u8	div_core_shift[ROCKCHIP_CPUCLK_MAX_CORES];
> > u32	div_core_mask[ROCKCHIP_CPUCLK_MAX_CORES];
> > int	num_cores;
>
> This is also my original intention, but with such modification, other 
> SOCs of RK need to be modified, otherwise they cannot be compatible with 
> the old SOC.

That is actually no problem, especially as the diff should be just a simple

static const struct rockchip_cpuclk_reg_data px30_cpuclk_data = {
-	.core_reg = PX30_CLKSEL_CON(0),
-	.div_core_shift = 0,
-	.div_core_mask = 0xf,
+	.core_reg[0] = PX30_CLKSEL_CON(0),
+	.div_core_shift[0] = 0,
+	.div_core_mask[0] = 0xf,
+	.num_cores = 1,
	.mux_core_alt = 1,
	.mux_core_main = 0,
	.mux_core_shift = 7,
	.mux_core_mask = 0x1,
};

So please go the clean way :-) 

Thanks
Heiko





More information about the linux-arm-kernel mailing list