[PATCH v1 18/18] arm64: dts: imx8mq: Add node to G2 hardware

Benjamin Gaignard benjamin.gaignard at collabora.com
Thu Feb 18 10:47:07 EST 2021


Le 17/02/2021 à 21:43, Ezequiel Garcia a écrit :
> On Wed, 2021-02-17 at 09:03 +0100, Benjamin Gaignard wrote:
>> Split VPU node in two: one for G1 and one for G2 since they are
>> different hardware blocks.
>>
>> Signed-off-by: Benjamin Gaignard <benjamin.gaignard at collabora.com>
>> ---
>>   arch/arm64/boot/dts/freescale/imx8mq.dtsi | 43 +++++++++++++++++------
>>   1 file changed, 33 insertions(+), 10 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
>> index d9d9efc8592d..3cab3f0b9131 100644
>> --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
>> +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
>> @@ -1287,17 +1287,16 @@ vpu_reset: vpu-reset at 38320000 {
>>                          #reset-cells = <1>;
>>                  };
>>   
>> -               vpu: video-codec at 38300000 {
>> +               vpu_g1: video-codec at 38300000 {
>>                          compatible = "nxp,imx8mq-vpu";
>> -                       reg = <0x38300000 0x10000>,
>> -                             <0x38310000 0x10000>;
>> -                       reg-names = "g1", "g2";
>> -                       interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
>> -                                    <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
>> -                       interrupt-names = "g1", "g2";
>> +                       reg = <0x38300000 0x10000>;
>> +                       reg-names = "g1";
>> +                       interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
>> +                       interrupt-names = "g1";
>>                          clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>,
>> -                                <&clk IMX8MQ_CLK_VPU_G2_ROOT>;
>> -                       clock-names = "g1", "g2";
>> +                                <&clk IMX8MQ_CLK_VPU_G2_ROOT>,
>> +                                <&clk IMX8MQ_CLK_VPU_DEC_ROOT>;
>> +                       clock-names = "g1", "g2", "bus";
> How come the G1 block needs the G2 clock?

It doesn't, I will remove it in v2

>
>>                          assigned-clocks = <&clk IMX8MQ_CLK_VPU_G1>,
>>                                            <&clk IMX8MQ_CLK_VPU_G2>,
>>                                            <&clk IMX8MQ_CLK_VPU_BUS>,
>> @@ -1306,12 +1305,36 @@ vpu: video-codec at 38300000 {
>>                                                   <&clk IMX8MQ_VPU_PLL_OUT>,
>>                                                   <&clk IMX8MQ_SYS1_PLL_800M>,
>>                                                   <&clk IMX8MQ_VPU_PLL>;
>> -                       assigned-clock-rates = <600000000>, <600000000>,
>> +                       assigned-clock-rates = <600000000>, <300000000>,
>>                                                 <800000000>, <0>;
>>                          resets = <&vpu_reset IMX8MQ_RESET_VPU_RESET_G1>;
>>                          power-domains = <&pgc_vpu>;
>>                  };
>>   
>> +               vpu_g2: video-codec at 38310000 {
>> +                       compatible = "nxp,imx8mq-vpu-g2";
>> +                       reg = <0x38310000 0x10000>;
>> +                       reg-names = "g2";
>> +                       interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
>> +                       interrupt-names = "g2";
>> +                       clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>,
>> +                                <&clk IMX8MQ_CLK_VPU_G2_ROOT>,
> Ditto, the G2 block needs the G1 clock?
>
> Thanks,
> Ezequiel
>
>



More information about the linux-arm-kernel mailing list