[PATCH 4/5] arm64: dts: broadcom: bcm4908: add remaining Netgear R8000P LEDs

Rafał Miłecki zajec5 at gmail.com
Mon Feb 15 15:41:04 EST 2021


From: Rafał Miłecki <rafal at milecki.pl>

There are a few more GPIO connected LEDs there didn't get described
initially.

Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
---
 .../bcm4908/bcm4906-netgear-r8000p.dts        | 48 +++++++++++++++++++
 1 file changed, 48 insertions(+)

diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
index af2616e82e83..0d02986c80ab 100644
--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
@@ -18,11 +18,59 @@ memory at 0 {
 	leds {
 		compatible = "gpio-leds";
 
+		power-white {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+		};
+
+		power-amber {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+		};
+
 		wps {
 			function = LED_FUNCTION_WPS;
 			color = <LED_COLOR_ID_WHITE>;
 			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
 		};
+
+		2ghz {
+			function = "2ghz";
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+		};
+
+		5ghz-1 {
+			function = "5ghz-1";
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+		};
+
+		5ghz-2 {
+			function = "5ghz-2";
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
+		};
+
+		usb2 {
+			function = "usb2";
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+		};
+
+		usb3 {
+			function = "usb3";
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+		};
+
+		wifi {
+			function = "wifi";
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&gpio0 56 GPIO_ACTIVE_LOW>;
+		};
 	};
 };
 
-- 
2.26.2




More information about the linux-arm-kernel mailing list