[PATCH v13 net-next 00/15] net: mvpp2: Add TX Flow Control support

[patchwork-bot+netdevbpf at kernel.org]

Hello:

This series was applied to netdev/net-next.git (refs/heads/master):

On Thu, 11 Feb 2021 12:48:47 +0200 you wrote:
> From: Stefan Chulski <stefanc at marvell.com>
> 
> Armada hardware has a pause generation mechanism in GOP (MAC).
> The GOP generate flow control frames based on an indication programmed in Ports Control 0 Register. There is a bit per port.
> However assertion of the PortX Pause bits in the ports control 0 register only sends a one time pause.
> To complement the function the GOP has a mechanism to periodically send pause control messages based on periodic counters.
> This mechanism ensures that the pause is effective as long as the Appropriate PortX Pause is asserted.
> 
> [...]

Here is the summary with links:
  - [v13,net-next,01/15] doc: marvell: add CM3 address space and PPv2.3 description
    https://git.kernel.org/netdev/net-next/c/1c2b4812b7da
  - [v13,net-next,02/15] dts: marvell: add CM3 SRAM memory to cp11x ethernet device tree
    https://git.kernel.org/netdev/net-next/c/60523583b07c
  - [v13,net-next,03/15] net: mvpp2: add CM3 SRAM memory map
    https://git.kernel.org/netdev/net-next/c/e54ad1e01c00
  - [v13,net-next,04/15] net: mvpp2: always compare hw-version vs MVPP21
    https://git.kernel.org/netdev/net-next/c/60dcd6b7d96e
  - [v13,net-next,05/15] net: mvpp2: add PPv23 version definition
    https://git.kernel.org/netdev/net-next/c/6af27a1dc422
  - [v13,net-next,06/15] net: mvpp2: increase BM pool and RXQ size
    https://git.kernel.org/netdev/net-next/c/d07ea73f37f9
  - [v13,net-next,07/15] net: mvpp2: add FCA periodic timer configurations
    https://git.kernel.org/netdev/net-next/c/2788d8418af5
  - [v13,net-next,08/15] net: mvpp2: add FCA RXQ non occupied descriptor threshold
    https://git.kernel.org/netdev/net-next/c/bf270fa3c445
  - [v13,net-next,09/15] net: mvpp2: enable global flow control
    https://git.kernel.org/netdev/net-next/c/a59d354208a7
  - [v13,net-next,10/15] net: mvpp2: add RXQ flow control configurations
    https://git.kernel.org/netdev/net-next/c/3bd17fdc08e9
  - [v13,net-next,11/15] net: mvpp2: add ethtool flow control configuration support
    https://git.kernel.org/netdev/net-next/c/76055831cf84
  - [v13,net-next,12/15] net: mvpp2: add BM protection underrun feature support
    https://git.kernel.org/netdev/net-next/c/eb30b269549a
  - [v13,net-next,13/15] net: mvpp2: add PPv23 RX FIFO flow control
    https://git.kernel.org/netdev/net-next/c/aca0e23584c9
  - [v13,net-next,14/15] net: mvpp2: set 802.3x GoP Flow Control mode
    https://git.kernel.org/netdev/net-next/c/262412d55acd
  - [v13,net-next,15/15] net: mvpp2: add TX FC firmware check
    https://git.kernel.org/netdev/net-next/c/9ca5e767ec34

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html