[PATCH v9 net-next 02/15] dts: marvell: add CM3 SRAM memory to cp11x ethernet device tree

[stefanc at marvell.com]

From: Konstantin Porotchkin <kostap at marvell.com>

CM3 SRAM address space would be used for Flow Control configuration.

Signed-off-by: Stefan Chulski <stefanc at marvell.com>
Signed-off-by: Konstantin Porotchkin <kostap at marvell.com>
---
 arch/arm64/boot/dts/marvell/armada-cp11x.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
index 9dcf16b..6fe0d26 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
@@ -59,7 +59,7 @@
 
 		CP11X_LABEL(ethernet): ethernet at 0 {
 			compatible = "marvell,armada-7k-pp22";
-			reg = <0x0 0x100000>, <0x129000 0xb000>;
+			reg = <0x0 0x100000>, <0x129000 0xb000>, <0x220000 0x800>;
 			clocks = <&CP11X_LABEL(clk) 1 3>, <&CP11X_LABEL(clk) 1 9>,
 				 <&CP11X_LABEL(clk) 1 5>, <&CP11X_LABEL(clk) 1 6>,
 				 <&CP11X_LABEL(clk) 1 18>;
-- 
1.9.1