[PATCH 08/15] ARM: dts: ls1021a: breakup long values in thermal node

[Li Yang]

Breakup long values to pass the schema check.

Signed-off-by: Li Yang <leoyang.li at nxp.com>
---
 arch/arm/boot/dts/ls1021a.dtsi | 72 +++++++++++++++++-----------------
 1 file changed, 36 insertions(+), 36 deletions(-)

diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index 215a3d928ec9..88e7248fc5f0 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -247,42 +247,42 @@
 			reg = <0x0 0x1f00000 0x0 0x10000>;
 			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 			fsl,tmu-range = <0xb0000 0x9002c 0x6004e 0x30066>;
-			fsl,tmu-calibration = <0x00000000 0x00000020
-					       0x00000001 0x00000024
-					       0x00000002 0x0000002a
-					       0x00000003 0x00000032
-					       0x00000004 0x00000038
-					       0x00000005 0x0000003e
-					       0x00000006 0x00000043
-					       0x00000007 0x0000004a
-					       0x00000008 0x00000050
-					       0x00000009 0x00000059
-					       0x0000000a 0x0000005f
-					       0x0000000b 0x00000066
-
-					       0x00010000 0x00000023
-					       0x00010001 0x0000002b
-					       0x00010002 0x00000033
-					       0x00010003 0x0000003a
-					       0x00010004 0x00000042
-					       0x00010005 0x0000004a
-					       0x00010006 0x00000054
-					       0x00010007 0x0000005c
-					       0x00010008 0x00000065
-					       0x00010009 0x0000006f
-
-					       0x00020000 0x00000029
-					       0x00020001 0x00000033
-					       0x00020002 0x0000003d
-					       0x00020003 0x00000048
-					       0x00020004 0x00000054
-					       0x00020005 0x00000060
-					       0x00020006 0x0000006c
-
-					       0x00030000 0x00000025
-					       0x00030001 0x00000033
-					       0x00030002 0x00000043
-					       0x00030003 0x00000055>;
+			fsl,tmu-calibration = <0x00000000 0x00000020>,
+					      <0x00000001 0x00000024>,
+					      <0x00000002 0x0000002a>,
+					      <0x00000003 0x00000032>,
+					      <0x00000004 0x00000038>,
+					      <0x00000005 0x0000003e>,
+					      <0x00000006 0x00000043>,
+					      <0x00000007 0x0000004a>,
+					      <0x00000008 0x00000050>,
+					      <0x00000009 0x00000059>,
+					      <0x0000000a 0x0000005f>,
+					      <0x0000000b 0x00000066>,
+
+					      <0x00010000 0x00000023>,
+					      <0x00010001 0x0000002b>,
+					      <0x00010002 0x00000033>,
+					      <0x00010003 0x0000003a>,
+					      <0x00010004 0x00000042>,
+					      <0x00010005 0x0000004a>,
+					      <0x00010006 0x00000054>,
+					      <0x00010007 0x0000005c>,
+					      <0x00010008 0x00000065>,
+					      <0x00010009 0x0000006f>,
+
+					      <0x00020000 0x00000029>,
+					      <0x00020001 0x00000033>,
+					      <0x00020002 0x0000003d>,
+					      <0x00020003 0x00000048>,
+					      <0x00020004 0x00000054>,
+					      <0x00020005 0x00000060>,
+					      <0x00020006 0x0000006c>,
+
+					      <0x00030000 0x00000025>,
+					      <0x00030001 0x00000033>,
+					      <0x00030002 0x00000043>,
+					      <0x00030003 0x00000055>;
 			#thermal-sensor-cells = <1>;
 		};
 
-- 
2.17.1