[PATCH 05/18] tty: serial: samsung_tty: add support for Apple UARTs
Hector Martin
marcan at marcan.st
Thu Feb 4 15:39:38 EST 2021
Apple SoCs are a distant descendant of Samsung designs and use yet
another variant of their UART style, with different interrupt handling.
In particular, this variant has the following differences with existing
ones:
* It includes a built-in interrupt controller with different registers,
using only a single platform IRQ
* Internal interrupt sources are treated as edge-triggered, even though
the IRQ output is level-triggered. This chiefly affects the TX IRQ
path: the driver can no longer rely on the TX buffer empty IRQ
immediately firing after TX is enabled, but instead must prime the
FIFO with data directly.
Signed-off-by: Hector Martin <marcan at marcan.st>
---
drivers/tty/serial/samsung_tty.c | 297 +++++++++++++++++++++++++++----
include/linux/serial_s3c.h | 16 ++
include/uapi/linux/serial_core.h | 3 +
3 files changed, 280 insertions(+), 36 deletions(-)
diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
index 8ae3e03fbd8c..6d812ba1b748 100644
--- a/drivers/tty/serial/samsung_tty.c
+++ b/drivers/tty/serial/samsung_tty.c
@@ -56,6 +56,9 @@
/* flag to ignore all characters coming in */
#define RXSTAT_DUMMY_READ (0x10000000)
+/* IRQ number used when the handler is called in non-IRQ context */
+#define NO_IRQ -1
+
struct s3c24xx_uart_info {
char *name;
unsigned int type;
@@ -144,6 +147,14 @@ struct s3c24xx_uart_port {
#endif
};
+enum s3c24xx_irq_type {
+ IRQ_DISCRETE = 0,
+ IRQ_S3C6400 = 1,
+ IRQ_APPLE = 2,
+};
+
+static void s3c24xx_serial_start_next_tx(struct s3c24xx_uart_port *ourport);
+
/* conversion functions */
#define s3c24xx_dev_to_port(__dev) dev_get_drvdata(__dev)
@@ -231,11 +242,20 @@ static int s3c24xx_serial_txempty_nofifo(struct uart_port *port)
/*
* s3c64xx and later SoC's include the interrupt mask and status registers in
* the controller itself, unlike the s3c24xx SoC's which have these registers
- * in the interrupt controller. Check if the port type is s3c64xx or higher.
+ * in the interrupt controller. Apple SoCs use a different flavor of mask
+ * and status registers. This function returns the IRQ style to use.
*/
-static int s3c24xx_serial_has_interrupt_mask(struct uart_port *port)
+static int s3c24xx_irq_type(struct uart_port *port)
{
- return to_ourport(port)->info->type == PORT_S3C6400;
+ switch (to_ourport(port)->info->type) {
+ case PORT_S3C6400:
+ return IRQ_S3C6400;
+ case PORT_APPLE:
+ return IRQ_APPLE;
+ default:
+ return IRQ_DISCRETE;
+ }
+
}
static void s3c24xx_serial_rx_enable(struct uart_port *port)
@@ -289,10 +309,17 @@ static void s3c24xx_serial_stop_tx(struct uart_port *port)
if (!ourport->tx_enabled)
return;
- if (s3c24xx_serial_has_interrupt_mask(port))
+ switch (s3c24xx_irq_type(port)) {
+ case IRQ_APPLE:
+ s3c24xx_clear_bit(port, APPLE_UCON_TXTHRESH_ENA, S3C2410_UCON);
+ break;
+ case IRQ_S3C6400:
s3c24xx_set_bit(port, S3C64XX_UINTM_TXD, S3C64XX_UINTM);
- else
+ break;
+ default:
disable_irq_nosync(ourport->tx_irq);
+ break;
+ }
if (dma && dma->tx_chan && ourport->tx_in_progress == S3C24XX_TX_DMA) {
dmaengine_pause(dma->tx_chan);
@@ -315,8 +342,6 @@ static void s3c24xx_serial_stop_tx(struct uart_port *port)
ourport->tx_mode = 0;
}
-static void s3c24xx_serial_start_next_tx(struct s3c24xx_uart_port *ourport);
-
static void s3c24xx_serial_tx_dma_complete(void *args)
{
struct s3c24xx_uart_port *ourport = args;
@@ -353,10 +378,17 @@ static void enable_tx_dma(struct s3c24xx_uart_port *ourport)
u32 ucon;
/* Mask Tx interrupt */
- if (s3c24xx_serial_has_interrupt_mask(port))
+ switch (s3c24xx_irq_type(port)) {
+ case IRQ_APPLE:
+ WARN_ON(1); // No DMA
+ break;
+ case IRQ_S3C6400:
s3c24xx_set_bit(port, S3C64XX_UINTM_TXD, S3C64XX_UINTM);
- else
+ break;
+ default:
disable_irq_nosync(ourport->tx_irq);
+ break;
+ }
/* Enable tx dma mode */
ucon = rd_regl(port, S3C2410_UCON);
@@ -369,6 +401,8 @@ static void enable_tx_dma(struct s3c24xx_uart_port *ourport)
ourport->tx_mode = S3C24XX_TX_DMA;
}
+static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id);
+
static void enable_tx_pio(struct s3c24xx_uart_port *ourport)
{
struct uart_port *port = &ourport->port;
@@ -383,16 +417,30 @@ static void enable_tx_pio(struct s3c24xx_uart_port *ourport)
ucon = rd_regl(port, S3C2410_UCON);
ucon &= ~(S3C64XX_UCON_TXMODE_MASK);
ucon |= S3C64XX_UCON_TXMODE_CPU;
- wr_regl(port, S3C2410_UCON, ucon);
/* Unmask Tx interrupt */
- if (s3c24xx_serial_has_interrupt_mask(port))
- s3c24xx_clear_bit(port, S3C64XX_UINTM_TXD,
- S3C64XX_UINTM);
- else
+ switch (s3c24xx_irq_type(port)) {
+ case IRQ_APPLE:
+ ucon |= APPLE_UCON_TXTHRESH_ENA_MSK;
+ break;
+ case IRQ_S3C6400:
+ s3c24xx_clear_bit(port, S3C64XX_UINTM_TXD, S3C64XX_UINTM);
+ break;
+ default:
enable_irq(ourport->tx_irq);
+ break;
+ }
+
+ wr_regl(port, S3C2410_UCON, ucon);
ourport->tx_mode = S3C24XX_TX_PIO;
+
+ /*
+ * The Apple version only has edge triggered TX IRQs, so we need
+ * to kick off the process by sending some characters here.
+ */
+ if (s3c24xx_irq_type(port) == IRQ_APPLE)
+ s3c24xx_serial_tx_chars(NO_IRQ, ourport);
}
static void s3c24xx_serial_start_tx_pio(struct s3c24xx_uart_port *ourport)
@@ -513,11 +561,18 @@ static void s3c24xx_serial_stop_rx(struct uart_port *port)
if (ourport->rx_enabled) {
dev_dbg(port->dev, "stopping rx\n");
- if (s3c24xx_serial_has_interrupt_mask(port))
- s3c24xx_set_bit(port, S3C64XX_UINTM_RXD,
- S3C64XX_UINTM);
- else
- disable_irq_nosync(ourport->rx_irq);
+ switch (s3c24xx_irq_type(port)) {
+ case IRQ_APPLE:
+ s3c24xx_clear_bit(port, APPLE_UCON_RXTHRESH_ENA, S3C2410_UCON);
+ s3c24xx_clear_bit(port, APPLE_UCON_RXTO_ENA, S3C2410_UCON);
+ break;
+ case IRQ_S3C6400:
+ s3c24xx_set_bit(port, S3C64XX_UINTM_RXD, S3C64XX_UINTM);
+ break;
+ default:
+ disable_irq_nosync(ourport->tx_irq);
+ break;
+ }
ourport->rx_enabled = 0;
}
if (dma && dma->rx_chan) {
@@ -651,14 +706,18 @@ static void enable_rx_pio(struct s3c24xx_uart_port *ourport)
/* set Rx mode to DMA mode */
ucon = rd_regl(port, S3C2410_UCON);
- ucon &= ~(S3C64XX_UCON_TIMEOUT_MASK |
- S3C64XX_UCON_EMPTYINT_EN |
- S3C64XX_UCON_DMASUS_EN |
- S3C64XX_UCON_TIMEOUT_EN |
- S3C64XX_UCON_RXMODE_MASK);
- ucon |= 0xf << S3C64XX_UCON_TIMEOUT_SHIFT |
- S3C64XX_UCON_TIMEOUT_EN |
- S3C64XX_UCON_RXMODE_CPU;
+ ucon &= ~S3C64XX_UCON_RXMODE_MASK;
+ ucon |= S3C64XX_UCON_RXMODE_CPU;
+
+ /* Apple types use these bits for IRQ masks */
+ if (s3c24xx_irq_type(port) != IRQ_APPLE) {
+ ucon &= ~(S3C64XX_UCON_TIMEOUT_MASK |
+ S3C64XX_UCON_EMPTYINT_EN |
+ S3C64XX_UCON_DMASUS_EN |
+ S3C64XX_UCON_TIMEOUT_EN);
+ ucon |= 0xf << S3C64XX_UCON_TIMEOUT_SHIFT |
+ S3C64XX_UCON_TIMEOUT_EN;
+ }
wr_regl(port, S3C2410_UCON, ucon);
ourport->rx_mode = S3C24XX_RX_PIO;
@@ -831,7 +890,9 @@ static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id)
unsigned long flags;
int count, dma_count = 0;
- spin_lock_irqsave(&port->lock, flags);
+ /* Only lock if called from IRQ context */
+ if (irq != NO_IRQ)
+ spin_lock_irqsave(&port->lock, flags);
count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
@@ -893,7 +954,8 @@ static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id)
s3c24xx_serial_stop_tx(port);
out:
- spin_unlock_irqrestore(&port->lock, flags);
+ if (irq != NO_IRQ)
+ spin_unlock_irqrestore(&port->lock, flags);
return IRQ_HANDLED;
}
@@ -916,6 +978,26 @@ static irqreturn_t s3c64xx_serial_handle_irq(int irq, void *id)
return ret;
}
+/* interrupt handler for Apple SoC's.*/
+static irqreturn_t apple_serial_handle_irq(int irq, void *id)
+{
+ struct s3c24xx_uart_port *ourport = id;
+ struct uart_port *port = &ourport->port;
+ unsigned int pend = rd_regl(port, S3C2410_UTRSTAT);
+ irqreturn_t ret = IRQ_HANDLED;
+
+ if (pend & (APPLE_UTRSTAT_RXTHRESH | APPLE_UTRSTAT_RXTO)) {
+ wr_regl(port, S3C2410_UTRSTAT, APPLE_UTRSTAT_RXTHRESH | APPLE_UTRSTAT_RXTO);
+ ret = s3c24xx_serial_rx_chars(irq, id);
+ }
+ if (pend & APPLE_UTRSTAT_TXTHRESH) {
+ wr_regl(port, S3C2410_UTRSTAT, APPLE_UTRSTAT_TXTHRESH);
+ ret = s3c24xx_serial_tx_chars(irq, id);
+ }
+
+ return ret;
+}
+
static unsigned int s3c24xx_serial_tx_empty(struct uart_port *port)
{
struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
@@ -1098,7 +1180,7 @@ static void s3c24xx_serial_shutdown(struct uart_port *port)
struct s3c24xx_uart_port *ourport = to_ourport(port);
if (ourport->tx_claimed) {
- if (!s3c24xx_serial_has_interrupt_mask(port))
+ if (s3c24xx_irq_type(port) == IRQ_DISCRETE)
free_irq(ourport->tx_irq, ourport);
ourport->tx_enabled = 0;
ourport->tx_claimed = 0;
@@ -1106,18 +1188,34 @@ static void s3c24xx_serial_shutdown(struct uart_port *port)
}
if (ourport->rx_claimed) {
- if (!s3c24xx_serial_has_interrupt_mask(port))
+ if (s3c24xx_irq_type(port) == IRQ_DISCRETE)
free_irq(ourport->rx_irq, ourport);
ourport->rx_claimed = 0;
ourport->rx_enabled = 0;
}
/* Clear pending interrupts and mask all interrupts */
- if (s3c24xx_serial_has_interrupt_mask(port)) {
+ switch (s3c24xx_irq_type(port)) {
+ case IRQ_APPLE: {
+ unsigned int ucon;
+
+ ucon = rd_regl(port, S3C2410_UCON);
+ ucon &= ~(APPLE_UCON_TXTHRESH_ENA_MSK |
+ APPLE_UCON_RXTHRESH_ENA_MSK |
+ APPLE_UCON_RXTO_ENA_MSK);
+ wr_regl(port, S3C2410_UCON, ucon);
+
+ wr_regl(port, S3C2410_UTRSTAT, APPLE_UTRSTAT_ALL_FLAGS);
+
+ free_irq(port->irq, ourport);
+ break;
+ }
+ case IRQ_S3C6400:
free_irq(port->irq, ourport);
wr_regl(port, S3C64XX_UINTP, 0xf);
wr_regl(port, S3C64XX_UINTM, 0xf);
+ break;
}
if (ourport->dma)
@@ -1215,6 +1313,47 @@ static int s3c64xx_serial_startup(struct uart_port *port)
return ret;
}
+static int apple_serial_startup(struct uart_port *port)
+{
+ struct s3c24xx_uart_port *ourport = to_ourport(port);
+ unsigned long flags;
+ unsigned int ufcon;
+ int ret;
+
+ wr_regl(port, S3C2410_UTRSTAT, APPLE_UTRSTAT_ALL_FLAGS);
+
+ ret = request_irq(port->irq, apple_serial_handle_irq, IRQF_SHARED,
+ s3c24xx_serial_portname(port), ourport);
+ if (ret) {
+ dev_err(port->dev, "cannot get irq %d\n", port->irq);
+ return ret;
+ }
+
+ /* For compatibility with s3c24xx Soc's */
+ ourport->rx_enabled = 1;
+ ourport->rx_claimed = 1;
+ ourport->tx_enabled = 0;
+ ourport->tx_claimed = 1;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ ufcon = rd_regl(port, S3C2410_UFCON);
+ ufcon |= S3C2410_UFCON_RESETRX | S5PV210_UFCON_RXTRIG8;
+ if (!uart_console(port))
+ ufcon |= S3C2410_UFCON_RESETTX;
+ wr_regl(port, S3C2410_UFCON, ufcon);
+
+ enable_rx_pio(ourport);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ /* Enable Rx Interrupt */
+ s3c24xx_set_bit(port, APPLE_UCON_RXTHRESH_ENA, S3C2410_UCON);
+ s3c24xx_set_bit(port, APPLE_UCON_RXTO_ENA, S3C2410_UCON);
+
+ return ret;
+}
+
/* power power management control */
static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level,
@@ -1544,6 +1683,8 @@ static const char *s3c24xx_serial_type(struct uart_port *port)
return "S3C2412";
case PORT_S3C6400:
return "S3C6400/10";
+ case PORT_APPLE:
+ return "APPLE";
default:
return NULL;
}
@@ -1868,9 +2009,16 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
/* setup info for port */
port->dev = &platdev->dev;
+ switch (s3c24xx_irq_type(port)) {
+ /* Startup sequence is different for Apple SoC's */
+ case IRQ_APPLE:
+ s3c24xx_serial_ops.startup = apple_serial_startup;
+ break;
/* Startup sequence is different for s3c64xx and higher SoC's */
- if (s3c24xx_serial_has_interrupt_mask(port))
+ case IRQ_S3C6400:
s3c24xx_serial_ops.startup = s3c64xx_serial_startup;
+ break;
+ }
port->uartclk = 1;
@@ -1905,7 +2053,7 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
ourport->tx_irq = ret + 1;
}
- if (!s3c24xx_serial_has_interrupt_mask(port)) {
+ if (s3c24xx_irq_type(port) == IRQ_DISCRETE) {
ret = platform_get_irq(platdev, 1);
if (ret > 0)
ourport->tx_irq = ret;
@@ -1945,10 +2093,24 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
pr_warn("uart: failed to enable baudclk\n");
/* Keep all interrupts masked and cleared */
- if (s3c24xx_serial_has_interrupt_mask(port)) {
+ switch (s3c24xx_irq_type(port)) {
+ case IRQ_APPLE: {
+ unsigned int ucon;
+
+ ucon = rd_regl(port, S3C2410_UCON);
+ ucon &= ~(APPLE_UCON_TXTHRESH_ENA_MSK |
+ APPLE_UCON_RXTHRESH_ENA_MSK |
+ APPLE_UCON_RXTO_ENA_MSK);
+ wr_regl(port, S3C2410_UCON, ucon);
+
+ wr_regl(port, S3C2410_UTRSTAT, APPLE_UTRSTAT_ALL_FLAGS);
+ break;
+ }
+ case IRQ_S3C6400:
wr_regl(port, S3C64XX_UINTM, 0xf);
wr_regl(port, S3C64XX_UINTP, 0xf);
wr_regl(port, S3C64XX_UINTSP, 0xf);
+ break;
}
dev_dbg(port->dev, "port: map=%pa, mem=%p, irq=%d (%d,%d), clock=%u\n",
@@ -2142,7 +2304,33 @@ static int s3c24xx_serial_resume_noirq(struct device *dev)
if (port) {
/* restore IRQ mask */
- if (s3c24xx_serial_has_interrupt_mask(port)) {
+ switch (s3c24xx_irq_type(port)) {
+ case IRQ_APPLE:
+ unsigned int ucon;
+
+ clk_prepare_enable(ourport->clk);
+ if (!IS_ERR(ourport->baudclk))
+ clk_prepare_enable(ourport->baudclk);
+
+ ucon = rd_regl(port, S3C2410_UCON);
+
+ ucon &= ~(APPLE_UCON_TXTHRESH_ENA_MSK |
+ APPLE_UCON_RXTHRESH_ENA_MSK |
+ APPLE_UCON_RXTO_ENA_MSK);
+
+ if (ourport->tx_enabled)
+ ucon |= APPLE_UCON_TXTHRESH_ENA_MSK;
+ if (ourport->rx_enabled)
+ ucon |= APPLE_UCON_RXTHRESH_ENA_MSK |
+ APPLE_UCON_RXTO_ENA_MSK;
+
+ wr_regl(port, S3C2410_UCON, ucon);
+
+ if (!IS_ERR(ourport->baudclk))
+ clk_disable_unprepare(ourport->baudclk);
+ clk_disable_unprepare(ourport->clk);
+ break;
+ case IRQ_S3C6400:
unsigned int uintm = 0xf;
if (ourport->tx_enabled)
@@ -2156,6 +2344,7 @@ static int s3c24xx_serial_resume_noirq(struct device *dev)
if (!IS_ERR(ourport->baudclk))
clk_disable_unprepare(ourport->baudclk);
clk_disable_unprepare(ourport->clk);
+ break;
}
}
@@ -2556,6 +2745,34 @@ static struct s3c24xx_serial_drv_data exynos5433_serial_drv_data = {
#define EXYNOS5433_SERIAL_DRV_DATA (kernel_ulong_t)NULL
#endif
+#if defined(CONFIG_ARCH_APPLE)
+static struct s3c24xx_serial_drv_data s5l_serial_drv_data = {
+ .info = &(struct s3c24xx_uart_info) {
+ .name = "Apple S5L UART",
+ .type = PORT_APPLE,
+ .fifosize = 16,
+ .rx_fifomask = S3C2410_UFSTAT_RXMASK,
+ .rx_fifoshift = S3C2410_UFSTAT_RXSHIFT,
+ .rx_fifofull = S3C2410_UFSTAT_RXFULL,
+ .tx_fifofull = S3C2410_UFSTAT_TXFULL,
+ .tx_fifomask = S3C2410_UFSTAT_TXMASK,
+ .tx_fifoshift = S3C2410_UFSTAT_TXSHIFT,
+ .def_clk_sel = S3C2410_UCON_CLKSEL0,
+ .num_clks = 1,
+ .clksel_mask = 0,
+ .clksel_shift = 0,
+ },
+ .def_cfg = &(struct s3c2410_uartcfg) {
+ .ucon = APPLE_UCON_DEFAULT,
+ .ufcon = S3C2410_UFCON_DEFAULT,
+ },
+};
+#define S5L_SERIAL_DRV_DATA ((kernel_ulong_t)&s5l_serial_drv_data)
+#else
+#define S5L_SERIAL_DRV_DATA ((kernel_ulong_t)NULL)
+#endif
+
+
static const struct platform_device_id s3c24xx_serial_driver_ids[] = {
{
.name = "s3c2410-uart",
@@ -2578,6 +2795,9 @@ static const struct platform_device_id s3c24xx_serial_driver_ids[] = {
}, {
.name = "exynos5433-uart",
.driver_data = EXYNOS5433_SERIAL_DRV_DATA,
+ }, {
+ .name = "s5l-uart",
+ .driver_data = S5L_SERIAL_DRV_DATA,
},
{ },
};
@@ -2599,6 +2819,8 @@ static const struct of_device_id s3c24xx_uart_dt_match[] = {
.data = (void *)EXYNOS4210_SERIAL_DRV_DATA },
{ .compatible = "samsung,exynos5433-uart",
.data = (void *)EXYNOS5433_SERIAL_DRV_DATA },
+ { .compatible = "AAPL,s5l-uart",
+ .data = (void *)S5L_SERIAL_DRV_DATA },
{},
};
MODULE_DEVICE_TABLE(of, s3c24xx_uart_dt_match);
@@ -2694,6 +2916,9 @@ static int __init s3c2410_early_console_setup(struct earlycon_device *device,
OF_EARLYCON_DECLARE(s3c2410, "samsung,s3c2410-uart",
s3c2410_early_console_setup);
+/* Apple SoCs are close enough to s3c2410 for earlycon */
+OF_EARLYCON_DECLARE(s5l, "AAPL,s5l-uart",
+ s3c2410_early_console_setup);
/* S3C2412, S3C2440, S3C64xx */
static struct samsung_early_console_data s3c2440_early_console_data = {
diff --git a/include/linux/serial_s3c.h b/include/linux/serial_s3c.h
index ca2c5393dc6b..377c8c6e5b97 100644
--- a/include/linux/serial_s3c.h
+++ b/include/linux/serial_s3c.h
@@ -246,6 +246,22 @@
S5PV210_UFCON_TXTRIG4 | \
S5PV210_UFCON_RXTRIG4)
+
+#define APPLE_UCON_RXTO_ENA 9
+#define APPLE_UCON_RXTHRESH_ENA 12
+#define APPLE_UCON_TXTHRESH_ENA 13
+#define APPLE_UCON_RXTO_ENA_MSK (1 << APPLE_UCON_RXTO_ENA)
+#define APPLE_UCON_RXTHRESH_ENA_MSK (1 << APPLE_UCON_RXTHRESH_ENA)
+#define APPLE_UCON_TXTHRESH_ENA_MSK (1 << APPLE_UCON_TXTHRESH_ENA)
+
+#define APPLE_UCON_DEFAULT S3C2410_UCON_RXFIFO_TOI
+
+#define APPLE_UTRSTAT_RXTHRESH (1<<4)
+#define APPLE_UTRSTAT_TXTHRESH (1<<5)
+#define APPLE_UTRSTAT_RXTO (1<<9)
+#define APPLE_UTRSTAT_ALL_FLAGS (0x3f0)
+
+
#ifndef __ASSEMBLY__
#include <linux/serial_core.h>
diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h
index 62c22045fe65..59d102b674db 100644
--- a/include/uapi/linux/serial_core.h
+++ b/include/uapi/linux/serial_core.h
@@ -277,4 +277,7 @@
/* Freescale LINFlexD UART */
#define PORT_LINFLEXUART 122
+/* Apple Silicon (M1/T8103) UART (Samsung variant) */
+#define PORT_APPLE 123
+
#endif /* _UAPILINUX_SERIAL_CORE_H */
--
2.30.0
More information about the linux-arm-kernel
mailing list