[PATCH V2 05/10] media: hantro: Allow i.MX8MQ G1 and G2 to run independently

Ezequiel Garcia ezequiel at vanguardiasur.com.ar
Thu Dec 16 04:09:26 PST 2021


Hi Adam,

On Thu, Dec 16, 2021 at 05:12:50AM -0600, Adam Ford wrote:
> The VPU in the i.MX8MQ is really the combination of Hantro G1 and
> Hantro G2. With the updated vpu-blk-ctrl, the power domains system
> can enable and disable them separately as well as pull them out of
> reset. This simplifies the code and lets them run independently
> while still retaining backwards compatibility with older device
> trees for those using G1.
> 
> Signed-off-by: Adam Ford <aford173 at gmail.com>
> 
> diff --git a/drivers/staging/media/hantro/hantro_drv.c b/drivers/staging/media/hantro/hantro_drv.c
> index ab2467998d29..e7afda388ee5 100644
> --- a/drivers/staging/media/hantro/hantro_drv.c
> +++ b/drivers/staging/media/hantro/hantro_drv.c
> @@ -609,6 +609,7 @@ static const struct of_device_id of_hantro_match[] = {
>  #endif
>  #ifdef CONFIG_VIDEO_HANTRO_IMX8M
>  	{ .compatible = "nxp,imx8mq-vpu", .data = &imx8mq_vpu_variant, },
> +	{ .compatible = "nxp,imx8mq-vpu-g1", .data = &imx8mq_vpu_g1_variant },
>  	{ .compatible = "nxp,imx8mq-vpu-g2", .data = &imx8mq_vpu_g2_variant },
>  #endif
>  #ifdef CONFIG_VIDEO_HANTRO_SAMA5D4
> diff --git a/drivers/staging/media/hantro/hantro_hw.h b/drivers/staging/media/hantro/hantro_hw.h
> index cff817ca8d22..96b14b43a4af 100644
> --- a/drivers/staging/media/hantro/hantro_hw.h
> +++ b/drivers/staging/media/hantro/hantro_hw.h
> @@ -299,6 +299,7 @@ enum hantro_enc_fmt {
>  	ROCKCHIP_VPU_ENC_FMT_UYVY422 = 3,
>  };
>  
> +extern const struct hantro_variant imx8mq_vpu_g1_variant;
>  extern const struct hantro_variant imx8mq_vpu_g2_variant;
>  extern const struct hantro_variant imx8mq_vpu_variant;
>  extern const struct hantro_variant px30_vpu_variant;
> diff --git a/drivers/staging/media/hantro/imx8m_vpu_hw.c b/drivers/staging/media/hantro/imx8m_vpu_hw.c
> index 1a43f6fceef9..4925f2a07d4c 100644
> --- a/drivers/staging/media/hantro/imx8m_vpu_hw.c
> +++ b/drivers/staging/media/hantro/imx8m_vpu_hw.c
> @@ -223,13 +223,6 @@ static void imx8m_vpu_g1_reset(struct hantro_ctx *ctx)
>  	imx8m_soft_reset(vpu, RESET_G1);
>  }
>  
> -static void imx8m_vpu_g2_reset(struct hantro_ctx *ctx)
> -{
> -	struct hantro_dev *vpu = ctx->dev;
> -
> -	imx8m_soft_reset(vpu, RESET_G2);
> -}
> -
>  /*
>   * Supported codec ops.
>   */
> @@ -255,17 +248,33 @@ static const struct hantro_codec_ops imx8mq_vpu_codec_ops[] = {
>  	},
>  };
>  
> +static const struct hantro_codec_ops imx8mq_vpu_g1_codec_ops[] = {
> +	[HANTRO_MODE_MPEG2_DEC] = {
> +		.run = hantro_g1_mpeg2_dec_run,
> +		.init = hantro_mpeg2_dec_init,
> +		.exit = hantro_mpeg2_dec_exit,
> +	},
> +	[HANTRO_MODE_VP8_DEC] = {
> +		.run = hantro_g1_vp8_dec_run,
> +		.init = hantro_vp8_dec_init,
> +		.exit = hantro_vp8_dec_exit,
> +	},
> +	[HANTRO_MODE_H264_DEC] = {
> +		.run = hantro_g1_h264_dec_run,
> +		.init = hantro_h264_dec_init,
> +		.exit = hantro_h264_dec_exit,
> +	},
> +};
> +
>  static const struct hantro_codec_ops imx8mq_vpu_g2_codec_ops[] = {
>  	[HANTRO_MODE_HEVC_DEC] = {
>  		.run = hantro_g2_hevc_dec_run,
> -		.reset = imx8m_vpu_g2_reset,
>  		.init = hantro_hevc_dec_init,
>  		.exit = hantro_hevc_dec_exit,
>  	},
>  	[HANTRO_MODE_VP9_DEC] = {
>  		.run = hantro_g2_vp9_dec_run,
>  		.done = hantro_g2_vp9_dec_done,
> -		.reset = imx8m_vpu_g2_reset,
>  		.init = hantro_vp9_dec_init,
>  		.exit = hantro_vp9_dec_exit,
>  	},
> @@ -285,6 +294,10 @@ static const struct hantro_irq imx8mq_g2_irqs[] = {
>  
>  static const char * const imx8mq_clk_names[] = { "g1", "g2", "bus" };
>  static const char * const imx8mq_reg_names[] = { "g1", "g2", "ctrl" };
> +static const char * const imx8mq_g1_clk_names[] = { "g1" };
> +static const char * const imx8mq_g1_reg_names[] = { "g1" };
> +static const char * const imx8mq_g2_clk_names[] = { "g2" };
> +static const char * const imx8mq_g2_reg_names[] = { "g2" };
>  

I believe the g1 and g2 _reg_names are now unused?

Thanks,
Ezequiel

>  const struct hantro_variant imx8mq_vpu_variant = {
>  	.dec_fmts = imx8m_vpu_dec_fmts,
> @@ -305,6 +318,21 @@ const struct hantro_variant imx8mq_vpu_variant = {
>  	.num_regs = ARRAY_SIZE(imx8mq_reg_names)
>  };
>  
> +const struct hantro_variant imx8mq_vpu_g1_variant = {
> +	.dec_fmts = imx8m_vpu_dec_fmts,
> +	.num_dec_fmts = ARRAY_SIZE(imx8m_vpu_dec_fmts),
> +	.postproc_fmts = imx8m_vpu_postproc_fmts,
> +	.num_postproc_fmts = ARRAY_SIZE(imx8m_vpu_postproc_fmts),
> +	.postproc_ops = &hantro_g1_postproc_ops,
> +	.codec = HANTRO_MPEG2_DECODER | HANTRO_VP8_DECODER |
> +		 HANTRO_H264_DECODER,
> +	.codec_ops = imx8mq_vpu_g1_codec_ops,
> +	.irqs = imx8mq_irqs,
> +	.num_irqs = ARRAY_SIZE(imx8mq_irqs),
> +	.clk_names = imx8mq_g1_clk_names,
> +	.num_clocks = ARRAY_SIZE(imx8mq_g1_clk_names),
> +};
> +
>  const struct hantro_variant imx8mq_vpu_g2_variant = {
>  	.dec_offset = 0x0,
>  	.dec_fmts = imx8m_vpu_g2_dec_fmts,
> @@ -314,10 +342,8 @@ const struct hantro_variant imx8mq_vpu_g2_variant = {
>  	.postproc_ops = &hantro_g2_postproc_ops,
>  	.codec = HANTRO_HEVC_DECODER | HANTRO_VP9_DECODER,
>  	.codec_ops = imx8mq_vpu_g2_codec_ops,
> -	.init = imx8mq_vpu_hw_init,
> -	.runtime_resume = imx8mq_runtime_resume,
>  	.irqs = imx8mq_g2_irqs,
>  	.num_irqs = ARRAY_SIZE(imx8mq_g2_irqs),
> -	.clk_names = imx8mq_clk_names,
> -	.num_clocks = ARRAY_SIZE(imx8mq_clk_names),
> +	.clk_names = imx8mq_g2_clk_names,
> +	.num_clocks = ARRAY_SIZE(imx8mq_g2_clk_names),
>  };
> -- 
> 2.32.0
> 



More information about the linux-arm-kernel mailing list