[PATCH v3 07/10] arm64: dts: lx2160a: add pcie EP mode nodes

Li Yang leoyang.li at nxp.com
Mon Dec 13 23:23:39 PST 2021


From: Xiaowei Bao <xiaowei.bao at nxp.com>

The LX2160A PCIe EP mode nodes based on controller used on lx2160a rev2.

Signed-off-by: Xiaowei Bao <xiaowei.bao at nxp.com>
Signed-off-by: Li Yang <leoyang.li at nxp.com>
Reviewed-by: Hou Zhiqiang <Zhiqiang.Hou at nxp.com>
---
 .../arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 60 +++++++++++++++++++
 1 file changed, 60 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index e571c4701db7..2cef89034269 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -1115,6 +1115,16 @@ pcie1: pcie at 3400000 {
 			status = "disabled";
 		};
 
+		pcie_ep1: pcie-ep at 3400000 {
+			compatible = "fsl,lx2160ar2-pcie-ep", "fsl,ls-pcie-ep";
+			reg = <0x00 0x03400000 0x0 0x00100000
+			       0x80 0x00000000 0x8 0x00000000>;
+			reg-names = "regs", "addr_space";
+			num-ob-windows = <8>;
+			num-ib-windows = <8>;
+			status = "disabled";
+		};
+
 		pcie2: pcie at 3500000 {
 			compatible = "fsl,lx2160ar2-pcie", "fsl,ls2088a-pcie";
 			reg = <0x00 0x03500000 0x0 0x00100000   /* controller registers */
@@ -1143,6 +1153,16 @@ pcie2: pcie at 3500000 {
 			status = "disabled";
 		};
 
+		pcie_ep2: pcie-ep at 3500000 {
+			compatible = "fsl,lx2160ar2-pcie-ep", "fsl,ls-pcie-ep";
+			reg = <0x00 0x03500000 0x0 0x00100000
+			       0x88 0x00000000 0x8 0x00000000>;
+			reg-names = "regs", "addr_space";
+			num-ob-windows = <8>;
+			num-ib-windows = <8>;
+			status = "disabled";
+		};
+
 		pcie3: pcie at 3600000 {
 			compatible = "fsl,lx2160ar2-pcie", "fsl,ls2088a-pcie";
 			reg = <0x00 0x03600000 0x0 0x00100000   /* controller registers */
@@ -1171,6 +1191,16 @@ pcie3: pcie at 3600000 {
 			status = "disabled";
 		};
 
+		pcie_ep3: pcie-ep at 3600000 {
+			compatible = "fsl,lx2160ar2-pcie-ep", "fsl,ls-pcie-ep";
+			reg = <0x00 0x03600000 0x0 0x00100000
+			       0x90 0x00000000 0x8 0x00000000>;
+			reg-names = "regs", "addr_space";
+			num-ob-windows = <256>;
+			num-ib-windows = <24>;
+			status = "disabled";
+		};
+
 		pcie4: pcie at 3700000 {
 			compatible = "fsl,lx2160ar2-pcie", "fsl,ls2088a-pcie";
 			reg = <0x00 0x03700000 0x0 0x00100000   /* controller registers */
@@ -1199,6 +1229,16 @@ pcie4: pcie at 3700000 {
 			status = "disabled";
 		};
 
+		pcie_ep4: pcie-ep at 3700000 {
+			compatible = "fsl,lx2160ar2-pcie-ep", "fsl,ls-pcie-ep";
+			reg = <0x00 0x03700000 0x0 0x00100000
+			       0x98 0x00000000 0x8 0x00000000>;
+			reg-names = "regs", "addr_space";
+			num-ob-windows = <8>;
+			num-ib-windows = <8>;
+			status = "disabled";
+		};
+
 		pcie5: pcie at 3800000 {
 			compatible = "fsl,lx2160ar2-pcie", "fsl,ls2088a-pcie";
 			reg = <0x00 0x03800000 0x0 0x00100000   /* controller registers */
@@ -1227,6 +1267,16 @@ pcie5: pcie at 3800000 {
 			status = "disabled";
 		};
 
+		pcie_ep5: pcie-ep at 3800000 {
+			compatible = "fsl,lx2160ar2-pcie-ep", "fsl,ls-pcie-ep";
+			reg = <0x00 0x03800000 0x0 0x00100000
+			       0xa0 0x00000000 0x8 0x00000000>;
+			reg-names = "regs", "addr_space";
+			num-ob-windows = <256>;
+			num-ib-windows = <24>;
+			status = "disabled";
+		};
+
 		pcie6: pcie at 3900000 {
 			compatible = "fsl,lx2160ar2-pcie", "fsl,ls2088a-pcie";
 			reg = <0x00 0x03900000 0x0 0x00100000   /* controller registers */
@@ -1255,6 +1305,16 @@ pcie6: pcie at 3900000 {
 			status = "disabled";
 		};
 
+		pcie_ep6: pcie-ep at 3900000 {
+			compatible = "fsl,lx2160ar2-pcie-ep", "fsl,ls-pcie-ep";
+			reg = <0x00 0x03900000 0x0 0x00100000
+			       0xa8 0x00000000 0x8 0x00000000>;
+			reg-names = "regs", "addr_space";
+			num-ob-windows = <8>;
+			num-ib-windows = <8>;
+			status = "disabled";
+		};
+
 		smmu: iommu at 5000000 {
 			compatible = "arm,mmu-500";
 			reg = <0 0x5000000 0 0x800000>;
-- 
2.25.1




More information about the linux-arm-kernel mailing list