[PATCH] ARM: imx_v6_v7_defconfig: Enable for DHCOM devices required RTC_DRV_RV3029C2

Johann Neuhauser jneuhauser at dh-electronics.com
Mon Dec 13 03:18:08 PST 2021


All imx6 DHCOM devices uses a on module gold cap/battery powered i2c rtc
"microcrystal,rv3029", which isn't enabled in the imx_v6_v7_defconfig.

The rtc for all imx6 DHCOM devices is defined in: imx6qdl-dhcom-som.dtsi
To have a working clock on all imx6qdl DHCOM based devices, enable the driver.

Signed-off-by: Johann Neuhauser <jneuhauser at dh-electronics.com>
---
 arch/arm/configs/imx_v6_v7_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index bc4cc600c473..5cd19bd47d2f 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -374,6 +374,7 @@ CONFIG_RTC_DRV_PCF8523=y
 CONFIG_RTC_DRV_PCF8563=y
 CONFIG_RTC_DRV_M41T80=y
 CONFIG_RTC_DRV_RC5T619=y
+CONFIG_RTC_DRV_RV3029C2=y
 CONFIG_RTC_DRV_DA9063=y
 CONFIG_RTC_DRV_MC13XXX=y
 CONFIG_RTC_DRV_MXC=y
-- 
2.30.2




More information about the linux-arm-kernel mailing list