[PATCH v5 3/7] drm/aspeed: Update INTR_STS handling

Tommy Haung tommy_huang at aspeedtech.com
Tue Dec 7 17:33:33 PST 2021


From: tommy-huang <tommy_huang at aspeedtech.com>

Add interrupt clear register define for further chip support.

Signed-off-by: tommy-huang <tommy_huang at aspeedtech.com>
---
 drivers/gpu/drm/aspeed/aspeed_gfx.h     | 1 +
 drivers/gpu/drm/aspeed/aspeed_gfx_drv.c | 6 +++++-
 2 files changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx.h b/drivers/gpu/drm/aspeed/aspeed_gfx.h
index 96501152bafa..4e6a442c3886 100644
--- a/drivers/gpu/drm/aspeed/aspeed_gfx.h
+++ b/drivers/gpu/drm/aspeed/aspeed_gfx.h
@@ -12,6 +12,7 @@ struct aspeed_gfx {
 	struct regmap			*scu;
 
 	u32				dac_reg;
+	u32				int_clr_reg;
 	u32				vga_scratch_reg;
 	u32				throd_val;
 	u32				scan_line_max;
diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
index b53fee6f1c17..d4b56b3c7597 100644
--- a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
+++ b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
@@ -60,6 +60,7 @@
 
 struct aspeed_gfx_config {
 	u32 dac_reg;		/* DAC register in SCU */
+	u32 int_clear_reg;	/* Interrupt clear register */
 	u32 vga_scratch_reg;	/* VGA scratch register in SCU */
 	u32 throd_val;		/* Default Threshold Seting */
 	u32 scan_line_max;	/* Max memory size of one scan line */
@@ -67,6 +68,7 @@ struct aspeed_gfx_config {
 
 static const struct aspeed_gfx_config ast2400_config = {
 	.dac_reg = 0x2c,
+	.int_clear_reg = 0x60,
 	.vga_scratch_reg = 0x50,
 	.throd_val = CRT_THROD_LOW(0x1e) | CRT_THROD_HIGH(0x12),
 	.scan_line_max = 64,
@@ -74,6 +76,7 @@ static const struct aspeed_gfx_config ast2400_config = {
 
 static const struct aspeed_gfx_config ast2500_config = {
 	.dac_reg = 0x2c,
+	.int_clear_reg = 0x60,
 	.vga_scratch_reg = 0x50,
 	.throd_val = CRT_THROD_LOW(0x24) | CRT_THROD_HIGH(0x3c),
 	.scan_line_max = 128,
@@ -119,7 +122,7 @@ static irqreturn_t aspeed_gfx_irq_handler(int irq, void *data)
 
 	if (reg & CRT_CTRL_VERTICAL_INTR_STS) {
 		drm_crtc_handle_vblank(&priv->pipe.crtc);
-		writel(reg, priv->base + CRT_CTRL1);
+		writel(reg, priv->base + priv->int_clr_reg);
 		return IRQ_HANDLED;
 	}
 
@@ -147,6 +150,7 @@ static int aspeed_gfx_load(struct drm_device *drm)
 	config = match->data;
 
 	priv->dac_reg = config->dac_reg;
+	priv->int_clr_reg = config->int_clear_reg;
 	priv->vga_scratch_reg = config->vga_scratch_reg;
 	priv->throd_val = config->throd_val;
 	priv->scan_line_max = config->scan_line_max;
-- 
2.17.1




More information about the linux-arm-kernel mailing list