[PATCH v3 3/4] clocksource/drivers/renesas-ostm: Add RZ/G2L OSTM support

[Biju Das]

Hi All,

Gentle ping.

Are we happy with this patch? Please let me know.

As mentioned in [1], it has dependency on reset patch

[1] https://patchwork.kernel.org/project/linux-renesas-soc/patch/20211112184413.4391-2-biju.das.jz@bp.renesas.com/

Regards,
Biju

> Subject: Re: [PATCH v3 3/4] clocksource/drivers/renesas-ostm: Add RZ/G2L
> OSTM support
> 
> Hi Biju, Daniel,
> 
> On Mon, Nov 29, 2021 at 11:06 AM Biju Das <biju.das.jz at bp.renesas.com>
> wrote:
> > > Subject: Re: [PATCH v3 3/4] clocksource/drivers/renesas-ostm: Add
> > > RZ/G2L OSTM support
> > >
> > > On 12/11/2021 19:44, Biju Das wrote:
> > > > RZ/G2L SoC has Generic Timer Module(a.k.a OSTM) which needs to
> > > > deassert the reset line before accessing any registers.
> > > >
> > > > This patch adds an entry point for RZ/G2L so that we can deassert
> > > > the reset line in probe callback.
> > >
> > > What is the connection between adding the reset line control and the
> > > platform driver at the end of the driver ?
> >
> > The original driver has no arm architecture timer, so it needs to be
> 
> s/driver/SoC used with this driver/
> 
> > called very early in the boot and using of calls for handling the
> clocks.
> 
> Hence must be handled by TIMER_OF_DECLARE().
> 
> > Where as RZ/G2L has arm architecture timer and it needs to release the
> > module Reset before accessing any registers. So it has to be built in
> > and it needs cpg driver which happens at later stage compared to the
> original case, for de-asserting the reset.
> >
> > Geert, please correct me if I am wrong.
> 
> The reset driver is not available yet at TIMER_OF_DECLARE() time, so
> of_reset_control_get_optional_exclusive() returns -EPROBE_DEFER on RZ/G2L.
> Fortunately there is no need to have this timer available early on RZ/G2L,
> as it uses the arm architecture timer as the main clock source.  Still, to
> be available at all, the platform driver is needed to support re-probing
> after the reset driver has become available.
> 
> 
> > > > Signed-off-by: Biju Das <biju.das.jz at bp.renesas.com>
> > > > Reviewed-by: Lad Prabhakar
> > > > <prabhakar.mahadev-lad.rj at bp.renesas.com>
> > > > ---
> > > > v2->v3:
> > > >  * Added reset_control_put() on error path.
> > > >  * enabled suppress_bind_attrs in ostm_device_driver structure
> > > > v1->v2:
> > > >  * Added reset handling inside ostm_init
> > > >  * Used same compatible for builtin driver aswell
> > > > ---
> > > >  drivers/clocksource/renesas-ostm.c | 39
> > > > +++++++++++++++++++++++++++++-
> > > >  1 file changed, 38 insertions(+), 1 deletion(-)
> > > >
> > > > diff --git a/drivers/clocksource/renesas-ostm.c
> > > > b/drivers/clocksource/renesas-ostm.c
> > > > index 3d06ba66008c..21d1392637b8 100644
> > > > --- a/drivers/clocksource/renesas-ostm.c
> > > > +++ b/drivers/clocksource/renesas-ostm.c
> > > > @@ -9,6 +9,8 @@
> > > >  #include <linux/clk.h>
> > > >  #include <linux/clockchips.h>
> > > >  #include <linux/interrupt.h>
> > > > +#include <linux/platform_device.h> #include <linux/reset.h>
> > > >  #include <linux/sched_clock.h>
> > > >  #include <linux/slab.h>
> > > >
> > > > @@ -159,6 +161,7 @@ static int __init ostm_init_clkevt(struct
> > > > timer_of
> > > > *to)
> > > >
> > > >  static int __init ostm_init(struct device_node *np)  {
> > > > +   struct reset_control *rstc;
> > > >     struct timer_of *to;
> > > >     int ret;
> > > >
> > > > @@ -166,6 +169,14 @@ static int __init ostm_init(struct device_node
> *np)
> > > >     if (!to)
> > > >             return -ENOMEM;
> > > >
> > > > +   rstc = of_reset_control_get_optional_exclusive(np, NULL);
> > > > +   if (IS_ERR(rstc)) {
> > > > +           ret = PTR_ERR(rstc);
> > > > +           goto err_free;
> > > > +   }
> > > > +
> > > > +   reset_control_deassert(rstc);
> > > > +
> > > >     to->flags = TIMER_OF_BASE | TIMER_OF_CLOCK;
> > > >     if (system_clock) {
> > > >             /*
> > > > @@ -178,7 +189,7 @@ static int __init ostm_init(struct device_node
> > > > *np)
> > > >
> > > >     ret = timer_of_init(np, to);
> > > >     if (ret)
> > > > -           goto err_free;
> > > > +           goto err_reset;
> > > >
> > > >     /*
> > > >      * First probed device will be used as system clocksource. Any
> > > > @@
> > > > -203,9 +214,35 @@ static int __init ostm_init(struct device_node
> > > > *np)
> > > >
> > > >  err_cleanup:
> > > >     timer_of_cleanup(to);
> > > > +err_reset:
> > > > +   reset_control_assert(rstc);
> > > > +   reset_control_put(rstc);
> > > >  err_free:
> > > >     kfree(to);
> > > >     return ret;
> > > >  }
> > > >
> > > >  TIMER_OF_DECLARE(ostm, "renesas,ostm", ostm_init);
> > > > +
> > > > +#ifdef CONFIG_ARCH_R9A07G044
> > > > +static int __init ostm_probe(struct platform_device *pdev) {
> > > > +   struct device *dev = &pdev->dev;
> > > > +
> > > > +   return ostm_init(dev->of_node); }
> > > > +
> > > > +static const struct of_device_id ostm_of_table[] = {
> > > > +   { .compatible = "renesas,ostm", },
> > > > +   { /* sentinel */ }
> > > > +};
> > > > +
> > > > +static struct platform_driver ostm_device_driver = {
> > > > +   .driver = {
> > > > +           .name = "renesas_ostm",
> > > > +           .of_match_table = of_match_ptr(ostm_of_table),
> > > > +           .suppress_bind_attrs = true,
> > > > +   },
> > > > +};
> > > > +builtin_platform_driver_probe(ostm_device_driver, ostm_probe);
> > > > +#endif
> 
> Gr{oetje,eeting}s,
> 
>                         Geert
> 
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-
> m68k.org
> 
> In personal conversations with technical people, I call myself a hacker.
> But when I'm talking to journalists I just say "programmer" or something
> like that.
>                                 -- Linus Torvalds