[RFC PATCH v6 3/4] scheduler: scan idle cpu in cluster for tasks within one LLC

Song Bao Hua (Barry Song) song.bao.hua at hisilicon.com
Wed Apr 28 10:51:03 BST 2021



> -----Original Message-----
> From: Dietmar Eggemann [mailto:dietmar.eggemann at arm.com]
> Sent: Tuesday, April 27, 2021 11:36 PM
> To: Song Bao Hua (Barry Song) <song.bao.hua at hisilicon.com>;
> tim.c.chen at linux.intel.com; catalin.marinas at arm.com; will at kernel.org;
> rjw at rjwysocki.net; vincent.guittot at linaro.org; bp at alien8.de;
> tglx at linutronix.de; mingo at redhat.com; lenb at kernel.org; peterz at infradead.org;
> rostedt at goodmis.org; bsegall at google.com; mgorman at suse.de
> Cc: msys.mizuma at gmail.com; valentin.schneider at arm.com;
> gregkh at linuxfoundation.org; Jonathan Cameron <jonathan.cameron at huawei.com>;
> juri.lelli at redhat.com; mark.rutland at arm.com; sudeep.holla at arm.com;
> aubrey.li at linux.intel.com; linux-arm-kernel at lists.infradead.org;
> linux-kernel at vger.kernel.org; linux-acpi at vger.kernel.org; x86 at kernel.org;
> xuwei (O) <xuwei5 at huawei.com>; Zengtao (B) <prime.zeng at hisilicon.com>;
> guodong.xu at linaro.org; yangyicong <yangyicong at huawei.com>; Liguozhu (Kenneth)
> <liguozhu at hisilicon.com>; linuxarm at openeuler.org; hpa at zytor.com
> Subject: Re: [RFC PATCH v6 3/4] scheduler: scan idle cpu in cluster for tasks
> within one LLC
> 
> On 20/04/2021 02:18, Barry Song wrote:
> 
> [...]
> 
> > @@ -5786,11 +5786,12 @@ static void record_wakee(struct task_struct *p)
> >   * whatever is irrelevant, spread criteria is apparent partner count exceeds
> >   * socket size.
> >   */
> > -static int wake_wide(struct task_struct *p)
> > +static int wake_wide(struct task_struct *p, int cluster)
> >  {
> >  	unsigned int master = current->wakee_flips;
> >  	unsigned int slave = p->wakee_flips;
> > -	int factor = __this_cpu_read(sd_llc_size);
> > +	int factor = cluster ? __this_cpu_read(sd_cluster_size) :
> > +		__this_cpu_read(sd_llc_size);
> 
> I don't see that the wake_wide() change has any effect here. None of the
> sched domains has SD_BALANCE_WAKE set so a wakeup (WF_TTWU) can never
> end up in the slow path.

I am really confused. The whole code has only checked if wake_flags
has WF_TTWU, it has never checked if sd_domain has SD_BALANCE_WAKE flag.

static int
select_task_rq_fair(struct task_struct *p, int prev_cpu, int wake_flags)
{
	...

	if (wake_flags & WF_TTWU) {
		record_wakee(p);

		if (sched_energy_enabled()) {
			new_cpu = find_energy_efficient_cpu(p, prev_cpu);
			if (new_cpu >= 0)
				return new_cpu;
			new_cpu = prev_cpu;
		}

		want_affine = !wake_wide(p) && cpumask_test_cpu(cpu, p->cpus_ptr);
	}
}

And try_to_wake_up() has always set WF_TTWU:
static int
try_to_wake_up(struct task_struct *p, unsigned int state, int wake_flags) 
{
	cpu = select_task_rq(p, p->wake_cpu, wake_flags | WF_TTWU);
	...
}

So the change in wake_wide will actually affect the value of want_affine.
And I did also see code entered slow path during my benchmark.

One issue I mentioned during linaro open discussion is that
since I have moved to use cluster size to decide the value
of wake_wide, relatively less tasks will make wake_wide()
decide to go to slow path, thus, tasks begin to spread to
other NUMA,  but actually llc_size might be able to contain
those tasks. So a possible model might be:
static int wake_wide(struct task_struct *p)
{
	tasksize < cluster : scan cluster
	tasksize > llc      : slow path
	tasksize > cluster && tasksize < llc: scan llc
}

thoughts?

> Have you seen a diff when running your `lmbench stream` workload in what
> wake_wide() returns when you use `sd cluster size` instead of `sd llc
> size` as factor?
> 
> I guess for you,  wakeups are now subdivided into faster (cluster = 4
> CPUs) and fast (llc = 24 CPUs) via sis(), not into fast (sis()) and slow
> (find_idlest_cpu()).
> 
> >
> >  	if (master < slave)
> >  		swap(master, slave);
> 
> [...]
> 
> > @@ -6745,6 +6748,12 @@ static int find_energy_efficient_cpu(struct
> task_struct *p, int prev_cpu)
> >  	int want_affine = 0;
> >  	/* SD_flags and WF_flags share the first nibble */
> >  	int sd_flag = wake_flags & 0xF;
> > +	/*
> > +	 * if cpu and prev_cpu share LLC, consider cluster sibling rather
> > +	 * than llc. this is typically true while tasks are bound within
> > +	 * one numa
> > +	 */
> > +	int cluster = sched_cluster_active() && cpus_share_cache(cpu, prev_cpu, 0);
> 
> So you changed from scanning cluster before LLC to scan either cluster
> or LLC.

Yes, I have seen two ugly things for scanning cluster before scanning LLC
in select_idle_cpu.
1. avg_scan_cost is actually measuring the scanning time. But if we scan
cluster before scanning LLC, during the gap of these two different
domains, we need a huge bit operation and this bit operation is not
a scanning operation at all. This makes the scan_cost quite
untrustworthy particularly "nr" can sometimes be < cluster size, sometimes
> cluster size.

2. select_idle_cpu() is actually the last step of wake_affine, before
that, wake_affine code has been totally depending on cpus_share_cache()
to decide the target to scan from. When waker and wakee have been already
in one LLC, if we only change select_idle_cpu(), at that time, decision
has been made. we may lose some chance to choose the right target to scan
from. So it should be more sensible to let cpus_share_cache() check cluster
when related tasks have been in one same LLC.

> 
> And this is based on whether `this_cpu` and `prev_cpu` are sharing LLC
> or not. So you only see an effect when running the workload with
> `numactl -N X ...`.

Ideally, I'd expect this can also positively affect tasks located in
different LLCs.
For example, if taskA and taskB are in different NUMAs(also LLC for both
kunpeng920 and Tim's hardware) at the first beginning, a two-stage packing
might make them take the advantage of cluster:
For the first wake-up, taskA and taskB will be put in one LLC by scanning
LLC; 
For the second wake-up, they might be put in one cluster by scanning
cluster.
So ideally, scanning LLC and scanning cluster can work in two stages
for related tasks and pack them step by step. Practically, this
could happen. But LB between NUMA might take the opposite way. Actually,
for a kernel completely *without* cluster patch, I have seen some
serious ping-pong of tasks in two numa nodes due to the conflict
of wake_affine and LB. this kind of ping-pong could seriously affect
the performance.
For example, for g=6,12,18,24,28,32, I have found running same workload
on 2numa shows so much worse latency than doing that on single one
numa(each numa has 24 cpus).
1numa command: numactl -N 0 hackbench -p -T -l 1000000 -f 1 -g $1
2numa command: numactl -N 0-1 hackbench -p -T -l 1000000 -f 1 -g $1

Measured the average latency of 20 times for each command.

*)without cluster scheduler, 2numa vs 1numa:
g      =     6     12     18    24      28     32
1numa      1.2474 1.5635 1.5133 1.4796 1.6177 1.7898
2numa      4.1997 5.8172 6.0159 7.2343 6.8264 6.5419

BTW, my cluster patch actually also improves 2numa:
*)with cluster scheduler 2numa vs 1numa:
g      =     6     12     18    24      28     32
1numa      0.9500 1.0728 1.1756 1.2201 1.4166 1.5464
2numa      3.5404 4.3744 4.3988 4.6994 5.3117 5.4908

*) 2numa  w/ and w/o cluster:
g          =     6     12     18    24      28     32
2numa w/o      4.1997 5.8172 6.0159 7.2343 6.8264 6.5419
2numa w/       3.5404 4.3744 4.3988 4.6994 5.3117 5.4908

Ideally, load balance should try to pull unmarried tasks rather than
married tasks. I mean, if we have
groupA: task1+task2 as couple, task3 as bachelor
groupB: task4.
groupB should try to pull task3. But I feel it is extremely hard to let
LB understand who is married and who is unmarried.

I assume 2numa worse than 1numa should be a different topic
which might be worth more investigation.

On the other hand, use cases I'm now targeting at are really using
"numactl -N x" to bind processes in one NUMA. If we ignore other NUMA
(also other LLCs) and think one NUMA as a whole system, cluster would
be the last-level topology scheduler can use. And the code could be
quite clean to directly leverage the existing select_sibling code for
LLC by simply changing cpus_share_cache() to cluster level.

> 
> >
> >  	if (wake_flags & WF_TTWU) {
> >  		record_wakee(p);
> > @@ -6756,7 +6765,7 @@ static int find_energy_efficient_cpu(struct task_struct
> *p, int prev_cpu)
> >  			new_cpu = prev_cpu;
> >  		}
> >
> > -		want_affine = !wake_wide(p) && cpumask_test_cpu(cpu, p->cpus_ptr);
> > +		want_affine = !wake_wide(p, cluster) && cpumask_test_cpu(cpu,
> p->cpus_ptr);
> >  	}
> >
> >  	rcu_read_lock();
> > @@ -6768,7 +6777,7 @@ static int find_energy_efficient_cpu(struct task_struct
> *p, int prev_cpu)
> >  		if (want_affine && (tmp->flags & SD_WAKE_AFFINE) &&
> >  		    cpumask_test_cpu(prev_cpu, sched_domain_span(tmp))) {
> >  			if (cpu != prev_cpu)
> > -				new_cpu = wake_affine(tmp, p, cpu, prev_cpu, sync);
> > +				new_cpu = wake_affine(tmp, p, cpu, prev_cpu, sync, cluster);
> >
> >  			sd = NULL; /* Prefer wake_affine over balance flags */
> >  			break;
> > @@ -6785,7 +6794,7 @@ static int find_energy_efficient_cpu(struct task_struct
> *p, int prev_cpu)
> >  		new_cpu = find_idlest_cpu(sd, p, cpu, prev_cpu, sd_flag);
> >  	} else if (wake_flags & WF_TTWU) { /* XXX always ? */
> >  		/* Fast path */
> > -		new_cpu = select_idle_sibling(p, prev_cpu, new_cpu);
> > +		new_cpu = select_idle_sibling(p, prev_cpu, new_cpu, cluster);
> >
> >  		if (want_affine)
> >  			current->recent_used_cpu = cpu;
> 
> [...]

Thanks
Barry



More information about the linux-arm-kernel mailing list