[PATCH V3] ARM: dts: imx6q-dhcom: Add PU,VDD1P1,VDD2P5 regulators

[Marek Vasut]

Per schematic, both PU and SOC regulator are supplied from LTC3676 SW1
via VDDSOC_IN rail, add the PU input. Both VDD1P1, VDD2P5 are supplied
from LTC3676 SW2 via VDDHIGH_IN rail, add both inputs.

While no instability or problems are currently observed, the regulators
should be fully described in DT and that description should fully match
the hardware, else this might lead to unforseen issues later. Fix this.

Fixes: 52c7a088badd ("ARM: dts: imx6q: Add support for the DHCOM iMX6 SoM and PDK2")
Reviewed-by: Fabio Estevam <festevam at gmail.com>
Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Christoph Niedermaier <cniedermaier at dh-electronics.com>
Cc: Fabio Estevam <festevam at gmail.com>
Cc: Ludwig Zenz <lzenz at dh-electronics.com>
Cc: NXP Linux Team <linux-imx at nxp.com>
Cc: Shawn Guo <shawnguo at kernel.org>
Cc: stable at vger.kernel.org
---
V2: Amend commit message
V3: Reinstate the missing SoB line, add RB
---
 arch/arm/boot/dts/imx6q-dhcom-som.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm/boot/dts/imx6q-dhcom-som.dtsi b/arch/arm/boot/dts/imx6q-dhcom-som.dtsi
index 236fc205c389..d0768ae429fa 100644
--- a/arch/arm/boot/dts/imx6q-dhcom-som.dtsi
+++ b/arch/arm/boot/dts/imx6q-dhcom-som.dtsi
@@ -406,6 +406,18 @@ &reg_soc {
 	vin-supply = <&sw1_reg>;
 };
 
+&reg_pu {
+	vin-supply = <&sw1_reg>;
+};
+
+&reg_vdd1p1 {
+	vin-supply = <&sw2_reg>;
+};
+
+&reg_vdd2p5 {
+	vin-supply = <&sw2_reg>;
+};
+
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
-- 
2.30.2