[PATCH 0/7] ARM: dts: stm32: clk: Switch ETHRX clock parent from ETHCK_K to MCO2 on DHCOM SoM

[Stephen Boyd]

Quoting Marek Vasut (2021-04-08 11:57:24)
> The implementation of ETH_RX_CLK/ETH_REF_CLK handling on STM32MP1 currently
> does not permit selecting the RX clock input from SoC pad, the RX clock are
> hard-wired to eth_clk_fb. This cover letter describes multiple unsuccessful
> attempts at solving this problem and a proposed partial solution.

Please use <sboyd at kernel.org> for clk patches, or run get_maintainer.pl