[PATCH v3 01/10] mm: add Kernel Electric-Fence infrastructure

Mark Rutland mark.rutland at arm.com
Tue Sep 29 11:05:49 EDT 2020


On Tue, Sep 29, 2020 at 04:51:29PM +0200, Marco Elver wrote:
> On Tue, 29 Sep 2020 at 16:24, Mark Rutland <mark.rutland at arm.com> wrote:
> [...]
> >
> > From other sub-threads it sounds like these addresses are not part of
> > the linear/direct map. Having kmalloc return addresses outside of the
> > linear map is going to break anything that relies on virt<->phys
> > conversions, and is liable to make DMA corrupt memory. There were
> > problems of that sort with VMAP_STACK, and this is why kvmalloc() is
> > separate from kmalloc().
> >
> > Have you tested with CONFIG_DEBUG_VIRTUAL? I'd expect that to scream.
> >
> > I strongly suspect this isn't going to be safe unless you always use an
> > in-place carevout from the linear map (which could be the linear alias
> > of a static carevout).
> 
> That's an excellent point, thank you! Indeed, on arm64, a version with
> naive static-pool screams with CONFIG_DEBUG_VIRTUAL.
> 
> We'll try to put together an arm64 version using a carveout as you suggest.

Great, thanks!

Just to be clear, the concerns for DMA and virt<->phys conversions also
apply to x86 (the x86 virt<->phys conversion behaviour is more forgiving
in the common case, but still has cases that can go wrong).

Other than the code to initialize the page tables for the careveout, I
think the carevout code can be geenric.

Thanks,
Mark.



More information about the linux-arm-kernel mailing list