[PATCH] Revert "video: fbdev: amba-clcd: Retire elder CLCD driver"
Daniel Vetter
daniel at ffwll.ch
Tue Sep 29 05:32:01 EDT 2020
On Tue, Sep 29, 2020 at 09:28:56AM +0200, Neil Armstrong wrote:
> Hi,
>
> On 28/09/2020 22:08, Peter Collingbourne wrote:
> > Also revert the follow-up change "drm: pl111: Absorb the external
> > register header".
> >
> > This reverts commits 7e4e589db76a3cf4c1f534eb5a09cc6422766b93
> > and 0fb8125635e8eb5483fb095f98dcf0651206a7b8.
> >
> > The fbdev driver is used by Android's FVP configuration. Using the
> > DRM driver together with DRM's fbdev emulation results in a failure
> > to boot Android. The root cause is that Android's generic fbdev
> > userspace driver relies on the ability to set the pixel format via
> > FBIOPUT_VSCREENINFO, which is not supported by fbdev emulation.
>
> Can't Android FVP use drm-hwcomposer instead ?
Also, if we need to add more random fbdev ioctls to the drm fbdev
emulation, then let's do that. Not keep fbdev drivers on life support for
longer than necessary.
>
> Neil
>
> >
> > There have been other less critical behavioral differences identified
> > between the fbdev driver and the DRM driver with fbdev emulation. The
> > DRM driver exposes different values for the panel's width, height and
> > refresh rate, and the DRM driver fails a FBIOPUT_VSCREENINFO syscall
> > with yres_virtual greater than the maximum supported value instead
> > of letting the syscall succeed and setting yres_virtual based on yres.
Also something that should be fixed I think in upstream, in the drm fbdev
emulation. At least doesn't sound like it's something unfixable.
-Daniel
> >
> > Signed-off-by: Peter Collingbourne <pcc at google.com>
> > ---
> > View this change in Gerrit: https://linux-review.googlesource.com/q/I2d7e59b0e693d9fec206d40df190c5aa02844b56
> >
> > MAINTAINERS | 5 +
> > drivers/gpu/drm/pl111/pl111_debugfs.c | 1 +
> > drivers/gpu/drm/pl111/pl111_display.c | 1 +
> > drivers/gpu/drm/pl111/pl111_drm.h | 73 --
> > drivers/gpu/drm/pl111/pl111_drv.c | 1 +
> > drivers/gpu/drm/pl111/pl111_versatile.c | 1 +
> > drivers/video/fbdev/Kconfig | 20 +
> > drivers/video/fbdev/Makefile | 1 +
> > drivers/video/fbdev/amba-clcd.c | 986 ++++++++++++++++++++++++
> > include/linux/amba/clcd-regs.h | 87 +++
> > include/linux/amba/clcd.h | 290 +++++++
> > 11 files changed, 1393 insertions(+), 73 deletions(-)
> > create mode 100644 drivers/video/fbdev/amba-clcd.c
> > create mode 100644 include/linux/amba/clcd-regs.h
> > create mode 100644 include/linux/amba/clcd.h
> >
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index 190c7fa2ea01..671c1fa79e64 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -1460,6 +1460,11 @@ S: Odd Fixes
> > F: drivers/amba/
> > F: include/linux/amba/bus.h
> >
> > +ARM PRIMECELL CLCD PL110 DRIVER
> > +M: Russell King <linux at armlinux.org.uk>
> > +S: Odd Fixes
> > +F: drivers/video/fbdev/amba-clcd.*
> > +
> > ARM PRIMECELL KMI PL050 DRIVER
> > M: Russell King <linux at armlinux.org.uk>
> > S: Odd Fixes
> > diff --git a/drivers/gpu/drm/pl111/pl111_debugfs.c b/drivers/gpu/drm/pl111/pl111_debugfs.c
> > index 317f68abf18b..26ca8cdf3e60 100644
> > --- a/drivers/gpu/drm/pl111/pl111_debugfs.c
> > +++ b/drivers/gpu/drm/pl111/pl111_debugfs.c
> > @@ -3,6 +3,7 @@
> > * Copyright © 2017 Broadcom
> > */
> >
> > +#include <linux/amba/clcd-regs.h>
> > #include <linux/seq_file.h>
> >
> > #include <drm/drm_debugfs.h>
> > diff --git a/drivers/gpu/drm/pl111/pl111_display.c b/drivers/gpu/drm/pl111/pl111_display.c
> > index b3e8697cafcf..703ddc803c55 100644
> > --- a/drivers/gpu/drm/pl111/pl111_display.c
> > +++ b/drivers/gpu/drm/pl111/pl111_display.c
> > @@ -9,6 +9,7 @@
> > * Copyright (C) 2011 Texas Instruments
> > */
> >
> > +#include <linux/amba/clcd-regs.h>
> > #include <linux/clk.h>
> > #include <linux/delay.h>
> > #include <linux/version.h>
> > diff --git a/drivers/gpu/drm/pl111/pl111_drm.h b/drivers/gpu/drm/pl111/pl111_drm.h
> > index 2a46b5bd8576..ba399bcb792f 100644
> > --- a/drivers/gpu/drm/pl111/pl111_drm.h
> > +++ b/drivers/gpu/drm/pl111/pl111_drm.h
> > @@ -23,79 +23,6 @@
> > #include <drm/drm_panel.h>
> > #include <drm/drm_simple_kms_helper.h>
> >
> > -/*
> > - * CLCD Controller Internal Register addresses
> > - */
> > -#define CLCD_TIM0 0x00000000
> > -#define CLCD_TIM1 0x00000004
> > -#define CLCD_TIM2 0x00000008
> > -#define CLCD_TIM3 0x0000000c
> > -#define CLCD_UBAS 0x00000010
> > -#define CLCD_LBAS 0x00000014
> > -
> > -#define CLCD_PL110_IENB 0x00000018
> > -#define CLCD_PL110_CNTL 0x0000001c
> > -#define CLCD_PL110_STAT 0x00000020
> > -#define CLCD_PL110_INTR 0x00000024
> > -#define CLCD_PL110_UCUR 0x00000028
> > -#define CLCD_PL110_LCUR 0x0000002C
> > -
> > -#define CLCD_PL111_CNTL 0x00000018
> > -#define CLCD_PL111_IENB 0x0000001c
> > -#define CLCD_PL111_RIS 0x00000020
> > -#define CLCD_PL111_MIS 0x00000024
> > -#define CLCD_PL111_ICR 0x00000028
> > -#define CLCD_PL111_UCUR 0x0000002c
> > -#define CLCD_PL111_LCUR 0x00000030
> > -
> > -#define CLCD_PALL 0x00000200
> > -#define CLCD_PALETTE 0x00000200
> > -
> > -#define TIM2_PCD_LO_MASK GENMASK(4, 0)
> > -#define TIM2_PCD_LO_BITS 5
> > -#define TIM2_CLKSEL (1 << 5)
> > -#define TIM2_ACB_MASK GENMASK(10, 6)
> > -#define TIM2_IVS (1 << 11)
> > -#define TIM2_IHS (1 << 12)
> > -#define TIM2_IPC (1 << 13)
> > -#define TIM2_IOE (1 << 14)
> > -#define TIM2_BCD (1 << 26)
> > -#define TIM2_PCD_HI_MASK GENMASK(31, 27)
> > -#define TIM2_PCD_HI_BITS 5
> > -#define TIM2_PCD_HI_SHIFT 27
> > -
> > -#define CNTL_LCDEN (1 << 0)
> > -#define CNTL_LCDBPP1 (0 << 1)
> > -#define CNTL_LCDBPP2 (1 << 1)
> > -#define CNTL_LCDBPP4 (2 << 1)
> > -#define CNTL_LCDBPP8 (3 << 1)
> > -#define CNTL_LCDBPP16 (4 << 1)
> > -#define CNTL_LCDBPP16_565 (6 << 1)
> > -#define CNTL_LCDBPP16_444 (7 << 1)
> > -#define CNTL_LCDBPP24 (5 << 1)
> > -#define CNTL_LCDBW (1 << 4)
> > -#define CNTL_LCDTFT (1 << 5)
> > -#define CNTL_LCDMONO8 (1 << 6)
> > -#define CNTL_LCDDUAL (1 << 7)
> > -#define CNTL_BGR (1 << 8)
> > -#define CNTL_BEBO (1 << 9)
> > -#define CNTL_BEPO (1 << 10)
> > -#define CNTL_LCDPWR (1 << 11)
> > -#define CNTL_LCDVCOMP(x) ((x) << 12)
> > -#define CNTL_LDMAFIFOTIME (1 << 15)
> > -#define CNTL_WATERMARK (1 << 16)
> > -
> > -/* ST Microelectronics variant bits */
> > -#define CNTL_ST_1XBPP_444 0x0
> > -#define CNTL_ST_1XBPP_5551 (1 << 17)
> > -#define CNTL_ST_1XBPP_565 (1 << 18)
> > -#define CNTL_ST_CDWID_12 0x0
> > -#define CNTL_ST_CDWID_16 (1 << 19)
> > -#define CNTL_ST_CDWID_18 (1 << 20)
> > -#define CNTL_ST_CDWID_24 ((1 << 19) | (1 << 20))
> > -#define CNTL_ST_CEAEN (1 << 21)
> > -#define CNTL_ST_LCDBPP24_PACKED (6 << 1)
> > -
> > #define CLCD_IRQ_NEXTBASE_UPDATE BIT(2)
> >
> > struct drm_minor;
> > diff --git a/drivers/gpu/drm/pl111/pl111_drv.c b/drivers/gpu/drm/pl111/pl111_drv.c
> > index 96e58fda75d8..da0c39dae874 100644
> > --- a/drivers/gpu/drm/pl111/pl111_drv.c
> > +++ b/drivers/gpu/drm/pl111/pl111_drv.c
> > @@ -47,6 +47,7 @@
> > */
> >
> > #include <linux/amba/bus.h>
> > +#include <linux/amba/clcd-regs.h>
> > #include <linux/dma-buf.h>
> > #include <linux/module.h>
> > #include <linux/of.h>
> > diff --git a/drivers/gpu/drm/pl111/pl111_versatile.c b/drivers/gpu/drm/pl111/pl111_versatile.c
> > index bdd883f4f0da..1127082e9a60 100644
> > --- a/drivers/gpu/drm/pl111/pl111_versatile.c
> > +++ b/drivers/gpu/drm/pl111/pl111_versatile.c
> > @@ -9,6 +9,7 @@
> > * Major contributions and discoveries by Russell King.
> > */
> >
> > +#include <linux/amba/clcd-regs.h>
> > #include <linux/bitops.h>
> > #include <linux/device.h>
> > #include <linux/mfd/syscon.h>
> > diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
> > index b2c9dd4f0cb5..402e85450bb5 100644
> > --- a/drivers/video/fbdev/Kconfig
> > +++ b/drivers/video/fbdev/Kconfig
> > @@ -272,6 +272,26 @@ config FB_PM2_FIFO_DISCONNECT
> > help
> > Support the Permedia2 FIFO disconnect feature.
> >
> > +config FB_ARMCLCD
> > + tristate "ARM PrimeCell PL110 support"
> > + depends on ARM || ARM64 || COMPILE_TEST
> > + depends on FB && ARM_AMBA && HAS_IOMEM
> > + select FB_CFB_FILLRECT
> > + select FB_CFB_COPYAREA
> > + select FB_CFB_IMAGEBLIT
> > + select FB_MODE_HELPERS if OF
> > + select VIDEOMODE_HELPERS if OF
> > + select BACKLIGHT_CLASS_DEVICE if OF
> > + help
> > + This framebuffer device driver is for the ARM PrimeCell PL110
> > + Colour LCD controller. ARM PrimeCells provide the building
> > + blocks for System on a Chip devices.
> > +
> > + If you want to compile this as a module (=code which can be
> > + inserted into and removed from the running kernel), say M
> > + here and read <file:Documentation/kbuild/modules.rst>. The module
> > + will be called amba-clcd.
> > +
> > config FB_ACORN
> > bool "Acorn VIDC support"
> > depends on (FB = y) && ARM && ARCH_ACORN
> > diff --git a/drivers/video/fbdev/Makefile b/drivers/video/fbdev/Makefile
> > index cad4fb64442a..a0705b99e643 100644
> > --- a/drivers/video/fbdev/Makefile
> > +++ b/drivers/video/fbdev/Makefile
> > @@ -75,6 +75,7 @@ obj-$(CONFIG_FB_HIT) += hitfb.o
> > obj-$(CONFIG_FB_ATMEL) += atmel_lcdfb.o
> > obj-$(CONFIG_FB_PVR2) += pvr2fb.o
> > obj-$(CONFIG_FB_VOODOO1) += sstfb.o
> > +obj-$(CONFIG_FB_ARMCLCD) += amba-clcd.o
> > obj-$(CONFIG_FB_GOLDFISH) += goldfishfb.o
> > obj-$(CONFIG_FB_68328) += 68328fb.o
> > obj-$(CONFIG_FB_GBE) += gbefb.o
> > diff --git a/drivers/video/fbdev/amba-clcd.c b/drivers/video/fbdev/amba-clcd.c
> > new file mode 100644
> > index 000000000000..b7682de412d8
> > --- /dev/null
> > +++ b/drivers/video/fbdev/amba-clcd.c
> > @@ -0,0 +1,986 @@
> > +/*
> > + * linux/drivers/video/amba-clcd.c
> > + *
> > + * Copyright (C) 2001 ARM Limited, by David A Rusling
> > + * Updated to 2.5, Deep Blue Solutions Ltd.
> > + *
> > + * This file is subject to the terms and conditions of the GNU General Public
> > + * License. See the file COPYING in the main directory of this archive
> > + * for more details.
> > + *
> > + * ARM PrimeCell PL110 Color LCD Controller
> > + */
> > +#include <linux/amba/bus.h>
> > +#include <linux/amba/clcd.h>
> > +#include <linux/backlight.h>
> > +#include <linux/clk.h>
> > +#include <linux/delay.h>
> > +#include <linux/dma-mapping.h>
> > +#include <linux/fb.h>
> > +#include <linux/init.h>
> > +#include <linux/ioport.h>
> > +#include <linux/list.h>
> > +#include <linux/mm.h>
> > +#include <linux/module.h>
> > +#include <linux/of_address.h>
> > +#include <linux/of_graph.h>
> > +#include <linux/slab.h>
> > +#include <linux/string.h>
> > +#include <video/display_timing.h>
> > +#include <video/of_display_timing.h>
> > +#include <video/videomode.h>
> > +
> > +#define to_clcd(info) container_of(info, struct clcd_fb, fb)
> > +
> > +/* This is limited to 16 characters when displayed by X startup */
> > +static const char *clcd_name = "CLCD FB";
> > +
> > +/*
> > + * Unfortunately, the enable/disable functions may be called either from
> > + * process or IRQ context, and we _need_ to delay. This is _not_ good.
> > + */
> > +static inline void clcdfb_sleep(unsigned int ms)
> > +{
> > + if (in_atomic()) {
> > + mdelay(ms);
> > + } else {
> > + msleep(ms);
> > + }
> > +}
> > +
> > +static inline void clcdfb_set_start(struct clcd_fb *fb)
> > +{
> > + unsigned long ustart = fb->fb.fix.smem_start;
> > + unsigned long lstart;
> > +
> > + ustart += fb->fb.var.yoffset * fb->fb.fix.line_length;
> > + lstart = ustart + fb->fb.var.yres * fb->fb.fix.line_length / 2;
> > +
> > + writel(ustart, fb->regs + CLCD_UBAS);
> > + writel(lstart, fb->regs + CLCD_LBAS);
> > +}
> > +
> > +static void clcdfb_disable(struct clcd_fb *fb)
> > +{
> > + u32 val;
> > +
> > + if (fb->board->disable)
> > + fb->board->disable(fb);
> > +
> > + if (fb->panel->backlight) {
> > + fb->panel->backlight->props.power = FB_BLANK_POWERDOWN;
> > + backlight_update_status(fb->panel->backlight);
> > + }
> > +
> > + val = readl(fb->regs + fb->off_cntl);
> > + if (val & CNTL_LCDPWR) {
> > + val &= ~CNTL_LCDPWR;
> > + writel(val, fb->regs + fb->off_cntl);
> > +
> > + clcdfb_sleep(20);
> > + }
> > + if (val & CNTL_LCDEN) {
> > + val &= ~CNTL_LCDEN;
> > + writel(val, fb->regs + fb->off_cntl);
> > + }
> > +
> > + /*
> > + * Disable CLCD clock source.
> > + */
> > + if (fb->clk_enabled) {
> > + fb->clk_enabled = false;
> > + clk_disable(fb->clk);
> > + }
> > +}
> > +
> > +static void clcdfb_enable(struct clcd_fb *fb, u32 cntl)
> > +{
> > + /*
> > + * Enable the CLCD clock source.
> > + */
> > + if (!fb->clk_enabled) {
> > + fb->clk_enabled = true;
> > + clk_enable(fb->clk);
> > + }
> > +
> > + /*
> > + * Bring up by first enabling..
> > + */
> > + cntl |= CNTL_LCDEN;
> > + writel(cntl, fb->regs + fb->off_cntl);
> > +
> > + clcdfb_sleep(20);
> > +
> > + /*
> > + * and now apply power.
> > + */
> > + cntl |= CNTL_LCDPWR;
> > + writel(cntl, fb->regs + fb->off_cntl);
> > +
> > + /*
> > + * Turn on backlight
> > + */
> > + if (fb->panel->backlight) {
> > + fb->panel->backlight->props.power = FB_BLANK_UNBLANK;
> > + backlight_update_status(fb->panel->backlight);
> > + }
> > +
> > + /*
> > + * finally, enable the interface.
> > + */
> > + if (fb->board->enable)
> > + fb->board->enable(fb);
> > +}
> > +
> > +static int
> > +clcdfb_set_bitfields(struct clcd_fb *fb, struct fb_var_screeninfo *var)
> > +{
> > + u32 caps;
> > + int ret = 0;
> > +
> > + if (fb->panel->caps && fb->board->caps)
> > + caps = fb->panel->caps & fb->board->caps;
> > + else {
> > + /* Old way of specifying what can be used */
> > + caps = fb->panel->cntl & CNTL_BGR ?
> > + CLCD_CAP_BGR : CLCD_CAP_RGB;
> > + /* But mask out 444 modes as they weren't supported */
> > + caps &= ~CLCD_CAP_444;
> > + }
> > +
> > + /* Only TFT panels can do RGB888/BGR888 */
> > + if (!(fb->panel->cntl & CNTL_LCDTFT))
> > + caps &= ~CLCD_CAP_888;
> > +
> > + memset(&var->transp, 0, sizeof(var->transp));
> > +
> > + var->red.msb_right = 0;
> > + var->green.msb_right = 0;
> > + var->blue.msb_right = 0;
> > +
> > + switch (var->bits_per_pixel) {
> > + case 1:
> > + case 2:
> > + case 4:
> > + case 8:
> > + /* If we can't do 5551, reject */
> > + caps &= CLCD_CAP_5551;
> > + if (!caps) {
> > + ret = -EINVAL;
> > + break;
> > + }
> > +
> > + var->red.length = var->bits_per_pixel;
> > + var->red.offset = 0;
> > + var->green.length = var->bits_per_pixel;
> > + var->green.offset = 0;
> > + var->blue.length = var->bits_per_pixel;
> > + var->blue.offset = 0;
> > + break;
> > +
> > + case 16:
> > + /* If we can't do 444, 5551 or 565, reject */
> > + if (!(caps & (CLCD_CAP_444 | CLCD_CAP_5551 | CLCD_CAP_565))) {
> > + ret = -EINVAL;
> > + break;
> > + }
> > +
> > + /*
> > + * Green length can be 4, 5 or 6 depending whether
> > + * we're operating in 444, 5551 or 565 mode.
> > + */
> > + if (var->green.length == 4 && caps & CLCD_CAP_444)
> > + caps &= CLCD_CAP_444;
> > + if (var->green.length == 5 && caps & CLCD_CAP_5551)
> > + caps &= CLCD_CAP_5551;
> > + else if (var->green.length == 6 && caps & CLCD_CAP_565)
> > + caps &= CLCD_CAP_565;
> > + else {
> > + /*
> > + * PL110 officially only supports RGB555,
> > + * but may be wired up to allow RGB565.
> > + */
> > + if (caps & CLCD_CAP_565) {
> > + var->green.length = 6;
> > + caps &= CLCD_CAP_565;
> > + } else if (caps & CLCD_CAP_5551) {
> > + var->green.length = 5;
> > + caps &= CLCD_CAP_5551;
> > + } else {
> > + var->green.length = 4;
> > + caps &= CLCD_CAP_444;
> > + }
> > + }
> > +
> > + if (var->green.length >= 5) {
> > + var->red.length = 5;
> > + var->blue.length = 5;
> > + } else {
> > + var->red.length = 4;
> > + var->blue.length = 4;
> > + }
> > + break;
> > + case 32:
> > + /* If we can't do 888, reject */
> > + caps &= CLCD_CAP_888;
> > + if (!caps) {
> > + ret = -EINVAL;
> > + break;
> > + }
> > +
> > + var->red.length = 8;
> > + var->green.length = 8;
> > + var->blue.length = 8;
> > + break;
> > + default:
> > + ret = -EINVAL;
> > + break;
> > + }
> > +
> > + /*
> > + * >= 16bpp displays have separate colour component bitfields
> > + * encoded in the pixel data. Calculate their position from
> > + * the bitfield length defined above.
> > + */
> > + if (ret == 0 && var->bits_per_pixel >= 16) {
> > + bool bgr, rgb;
> > +
> > + bgr = caps & CLCD_CAP_BGR && var->blue.offset == 0;
> > + rgb = caps & CLCD_CAP_RGB && var->red.offset == 0;
> > +
> > + if (!bgr && !rgb)
> > + /*
> > + * The requested format was not possible, try just
> > + * our capabilities. One of BGR or RGB must be
> > + * supported.
> > + */
> > + bgr = caps & CLCD_CAP_BGR;
> > +
> > + if (bgr) {
> > + var->blue.offset = 0;
> > + var->green.offset = var->blue.offset + var->blue.length;
> > + var->red.offset = var->green.offset + var->green.length;
> > + } else {
> > + var->red.offset = 0;
> > + var->green.offset = var->red.offset + var->red.length;
> > + var->blue.offset = var->green.offset + var->green.length;
> > + }
> > + }
> > +
> > + return ret;
> > +}
> > +
> > +static int clcdfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
> > +{
> > + struct clcd_fb *fb = to_clcd(info);
> > + int ret = -EINVAL;
> > +
> > + if (fb->board->check)
> > + ret = fb->board->check(fb, var);
> > +
> > + if (ret == 0 &&
> > + var->xres_virtual * var->bits_per_pixel / 8 *
> > + var->yres_virtual > fb->fb.fix.smem_len)
> > + ret = -EINVAL;
> > +
> > + if (ret == 0)
> > + ret = clcdfb_set_bitfields(fb, var);
> > +
> > + return ret;
> > +}
> > +
> > +static int clcdfb_set_par(struct fb_info *info)
> > +{
> > + struct clcd_fb *fb = to_clcd(info);
> > + struct clcd_regs regs;
> > +
> > + fb->fb.fix.line_length = fb->fb.var.xres_virtual *
> > + fb->fb.var.bits_per_pixel / 8;
> > +
> > + if (fb->fb.var.bits_per_pixel <= 8)
> > + fb->fb.fix.visual = FB_VISUAL_PSEUDOCOLOR;
> > + else
> > + fb->fb.fix.visual = FB_VISUAL_TRUECOLOR;
> > +
> > + fb->board->decode(fb, ®s);
> > +
> > + clcdfb_disable(fb);
> > +
> > + writel(regs.tim0, fb->regs + CLCD_TIM0);
> > + writel(regs.tim1, fb->regs + CLCD_TIM1);
> > + writel(regs.tim2, fb->regs + CLCD_TIM2);
> > + writel(regs.tim3, fb->regs + CLCD_TIM3);
> > +
> > + clcdfb_set_start(fb);
> > +
> > + clk_set_rate(fb->clk, (1000000000 / regs.pixclock) * 1000);
> > +
> > + fb->clcd_cntl = regs.cntl;
> > +
> > + clcdfb_enable(fb, regs.cntl);
> > +
> > +#ifdef DEBUG
> > + printk(KERN_INFO
> > + "CLCD: Registers set to\n"
> > + " %08x %08x %08x %08x\n"
> > + " %08x %08x %08x %08x\n",
> > + readl(fb->regs + CLCD_TIM0), readl(fb->regs + CLCD_TIM1),
> > + readl(fb->regs + CLCD_TIM2), readl(fb->regs + CLCD_TIM3),
> > + readl(fb->regs + CLCD_UBAS), readl(fb->regs + CLCD_LBAS),
> > + readl(fb->regs + fb->off_ienb), readl(fb->regs + fb->off_cntl));
> > +#endif
> > +
> > + return 0;
> > +}
> > +
> > +static inline u32 convert_bitfield(int val, struct fb_bitfield *bf)
> > +{
> > + unsigned int mask = (1 << bf->length) - 1;
> > +
> > + return (val >> (16 - bf->length) & mask) << bf->offset;
> > +}
> > +
> > +/*
> > + * Set a single color register. The values supplied have a 16 bit
> > + * magnitude. Return != 0 for invalid regno.
> > + */
> > +static int
> > +clcdfb_setcolreg(unsigned int regno, unsigned int red, unsigned int green,
> > + unsigned int blue, unsigned int transp, struct fb_info *info)
> > +{
> > + struct clcd_fb *fb = to_clcd(info);
> > +
> > + if (regno < 16)
> > + fb->cmap[regno] = convert_bitfield(transp, &fb->fb.var.transp) |
> > + convert_bitfield(blue, &fb->fb.var.blue) |
> > + convert_bitfield(green, &fb->fb.var.green) |
> > + convert_bitfield(red, &fb->fb.var.red);
> > +
> > + if (fb->fb.fix.visual == FB_VISUAL_PSEUDOCOLOR && regno < 256) {
> > + int hw_reg = CLCD_PALETTE + ((regno * 2) & ~3);
> > + u32 val, mask, newval;
> > +
> > + newval = (red >> 11) & 0x001f;
> > + newval |= (green >> 6) & 0x03e0;
> > + newval |= (blue >> 1) & 0x7c00;
> > +
> > + /*
> > + * 3.2.11: if we're configured for big endian
> > + * byte order, the palette entries are swapped.
> > + */
> > + if (fb->clcd_cntl & CNTL_BEBO)
> > + regno ^= 1;
> > +
> > + if (regno & 1) {
> > + newval <<= 16;
> > + mask = 0x0000ffff;
> > + } else {
> > + mask = 0xffff0000;
> > + }
> > +
> > + val = readl(fb->regs + hw_reg) & mask;
> > + writel(val | newval, fb->regs + hw_reg);
> > + }
> > +
> > + return regno > 255;
> > +}
> > +
> > +/*
> > + * Blank the screen if blank_mode != 0, else unblank. If blank == NULL
> > + * then the caller blanks by setting the CLUT (Color Look Up Table) to all
> > + * black. Return 0 if blanking succeeded, != 0 if un-/blanking failed due
> > + * to e.g. a video mode which doesn't support it. Implements VESA suspend
> > + * and powerdown modes on hardware that supports disabling hsync/vsync:
> > + * blank_mode == 2: suspend vsync
> > + * blank_mode == 3: suspend hsync
> > + * blank_mode == 4: powerdown
> > + */
> > +static int clcdfb_blank(int blank_mode, struct fb_info *info)
> > +{
> > + struct clcd_fb *fb = to_clcd(info);
> > +
> > + if (blank_mode != 0) {
> > + clcdfb_disable(fb);
> > + } else {
> > + clcdfb_enable(fb, fb->clcd_cntl);
> > + }
> > + return 0;
> > +}
> > +
> > +static int clcdfb_mmap(struct fb_info *info,
> > + struct vm_area_struct *vma)
> > +{
> > + struct clcd_fb *fb = to_clcd(info);
> > + unsigned long len, off = vma->vm_pgoff << PAGE_SHIFT;
> > + int ret = -EINVAL;
> > +
> > + len = info->fix.smem_len;
> > +
> > + if (off <= len && vma->vm_end - vma->vm_start <= len - off &&
> > + fb->board->mmap)
> > + ret = fb->board->mmap(fb, vma);
> > +
> > + return ret;
> > +}
> > +
> > +static const struct fb_ops clcdfb_ops = {
> > + .owner = THIS_MODULE,
> > + .fb_check_var = clcdfb_check_var,
> > + .fb_set_par = clcdfb_set_par,
> > + .fb_setcolreg = clcdfb_setcolreg,
> > + .fb_blank = clcdfb_blank,
> > + .fb_fillrect = cfb_fillrect,
> > + .fb_copyarea = cfb_copyarea,
> > + .fb_imageblit = cfb_imageblit,
> > + .fb_mmap = clcdfb_mmap,
> > +};
> > +
> > +static int clcdfb_register(struct clcd_fb *fb)
> > +{
> > + int ret;
> > +
> > + /*
> > + * ARM PL111 always has IENB at 0x1c; it's only PL110
> > + * which is reversed on some platforms.
> > + */
> > + if (amba_manf(fb->dev) == 0x41 && amba_part(fb->dev) == 0x111) {
> > + fb->off_ienb = CLCD_PL111_IENB;
> > + fb->off_cntl = CLCD_PL111_CNTL;
> > + } else {
> > + fb->off_ienb = CLCD_PL110_IENB;
> > + fb->off_cntl = CLCD_PL110_CNTL;
> > + }
> > +
> > + fb->clk = clk_get(&fb->dev->dev, NULL);
> > + if (IS_ERR(fb->clk)) {
> > + ret = PTR_ERR(fb->clk);
> > + goto out;
> > + }
> > +
> > + ret = clk_prepare(fb->clk);
> > + if (ret)
> > + goto free_clk;
> > +
> > + fb->fb.device = &fb->dev->dev;
> > +
> > + fb->fb.fix.mmio_start = fb->dev->res.start;
> > + fb->fb.fix.mmio_len = resource_size(&fb->dev->res);
> > +
> > + fb->regs = ioremap(fb->fb.fix.mmio_start, fb->fb.fix.mmio_len);
> > + if (!fb->regs) {
> > + printk(KERN_ERR "CLCD: unable to remap registers\n");
> > + ret = -ENOMEM;
> > + goto clk_unprep;
> > + }
> > +
> > + fb->fb.fbops = &clcdfb_ops;
> > + fb->fb.flags = FBINFO_FLAG_DEFAULT;
> > + fb->fb.pseudo_palette = fb->cmap;
> > +
> > + strncpy(fb->fb.fix.id, clcd_name, sizeof(fb->fb.fix.id));
> > + fb->fb.fix.type = FB_TYPE_PACKED_PIXELS;
> > + fb->fb.fix.type_aux = 0;
> > + fb->fb.fix.xpanstep = 0;
> > + fb->fb.fix.ypanstep = 0;
> > + fb->fb.fix.ywrapstep = 0;
> > + fb->fb.fix.accel = FB_ACCEL_NONE;
> > +
> > + fb->fb.var.xres = fb->panel->mode.xres;
> > + fb->fb.var.yres = fb->panel->mode.yres;
> > + fb->fb.var.xres_virtual = fb->panel->mode.xres;
> > + fb->fb.var.yres_virtual = fb->panel->mode.yres;
> > + fb->fb.var.bits_per_pixel = fb->panel->bpp;
> > + fb->fb.var.grayscale = fb->panel->grayscale;
> > + fb->fb.var.pixclock = fb->panel->mode.pixclock;
> > + fb->fb.var.left_margin = fb->panel->mode.left_margin;
> > + fb->fb.var.right_margin = fb->panel->mode.right_margin;
> > + fb->fb.var.upper_margin = fb->panel->mode.upper_margin;
> > + fb->fb.var.lower_margin = fb->panel->mode.lower_margin;
> > + fb->fb.var.hsync_len = fb->panel->mode.hsync_len;
> > + fb->fb.var.vsync_len = fb->panel->mode.vsync_len;
> > + fb->fb.var.sync = fb->panel->mode.sync;
> > + fb->fb.var.vmode = fb->panel->mode.vmode;
> > + fb->fb.var.activate = FB_ACTIVATE_NOW;
> > + fb->fb.var.nonstd = 0;
> > + fb->fb.var.height = fb->panel->height;
> > + fb->fb.var.width = fb->panel->width;
> > + fb->fb.var.accel_flags = 0;
> > +
> > + fb->fb.monspecs.hfmin = 0;
> > + fb->fb.monspecs.hfmax = 100000;
> > + fb->fb.monspecs.vfmin = 0;
> > + fb->fb.monspecs.vfmax = 400;
> > + fb->fb.monspecs.dclkmin = 1000000;
> > + fb->fb.monspecs.dclkmax = 100000000;
> > +
> > + /*
> > + * Make sure that the bitfields are set appropriately.
> > + */
> > + clcdfb_set_bitfields(fb, &fb->fb.var);
> > +
> > + /*
> > + * Allocate colourmap.
> > + */
> > + ret = fb_alloc_cmap(&fb->fb.cmap, 256, 0);
> > + if (ret)
> > + goto unmap;
> > +
> > + /*
> > + * Ensure interrupts are disabled.
> > + */
> > + writel(0, fb->regs + fb->off_ienb);
> > +
> > + fb_set_var(&fb->fb, &fb->fb.var);
> > +
> > + dev_info(&fb->dev->dev, "%s hardware, %s display\n",
> > + fb->board->name, fb->panel->mode.name);
> > +
> > + ret = register_framebuffer(&fb->fb);
> > + if (ret == 0)
> > + goto out;
> > +
> > + printk(KERN_ERR "CLCD: cannot register framebuffer (%d)\n", ret);
> > +
> > + fb_dealloc_cmap(&fb->fb.cmap);
> > + unmap:
> > + iounmap(fb->regs);
> > + clk_unprep:
> > + clk_unprepare(fb->clk);
> > + free_clk:
> > + clk_put(fb->clk);
> > + out:
> > + return ret;
> > +}
> > +
> > +#ifdef CONFIG_OF
> > +static int clcdfb_of_get_dpi_panel_mode(struct device_node *node,
> > + struct clcd_panel *clcd_panel)
> > +{
> > + int err;
> > + struct display_timing timing;
> > + struct videomode video;
> > +
> > + err = of_get_display_timing(node, "panel-timing", &timing);
> > + if (err) {
> > + pr_err("%pOF: problems parsing panel-timing (%d)\n", node, err);
> > + return err;
> > + }
> > +
> > + videomode_from_timing(&timing, &video);
> > +
> > + err = fb_videomode_from_videomode(&video, &clcd_panel->mode);
> > + if (err)
> > + return err;
> > +
> > + /* Set up some inversion flags */
> > + if (timing.flags & DISPLAY_FLAGS_PIXDATA_NEGEDGE)
> > + clcd_panel->tim2 |= TIM2_IPC;
> > + else if (!(timing.flags & DISPLAY_FLAGS_PIXDATA_POSEDGE))
> > + /*
> > + * To preserve backwards compatibility, the IPC (inverted
> > + * pixel clock) flag needs to be set on any display that
> > + * doesn't explicitly specify that the pixel clock is
> > + * active on the negative or positive edge.
> > + */
> > + clcd_panel->tim2 |= TIM2_IPC;
> > +
> > + if (timing.flags & DISPLAY_FLAGS_HSYNC_LOW)
> > + clcd_panel->tim2 |= TIM2_IHS;
> > +
> > + if (timing.flags & DISPLAY_FLAGS_VSYNC_LOW)
> > + clcd_panel->tim2 |= TIM2_IVS;
> > +
> > + if (timing.flags & DISPLAY_FLAGS_DE_LOW)
> > + clcd_panel->tim2 |= TIM2_IOE;
> > +
> > + return 0;
> > +}
> > +
> > +static int clcdfb_snprintf_mode(char *buf, int size, struct fb_videomode *mode)
> > +{
> > + return snprintf(buf, size, "%ux%u@%u", mode->xres, mode->yres,
> > + mode->refresh);
> > +}
> > +
> > +static int clcdfb_of_get_backlight(struct device *dev,
> > + struct clcd_panel *clcd_panel)
> > +{
> > + struct backlight_device *backlight;
> > +
> > + /* Look up the optional backlight device */
> > + backlight = devm_of_find_backlight(dev);
> > + if (IS_ERR(backlight))
> > + return PTR_ERR(backlight);
> > +
> > + clcd_panel->backlight = backlight;
> > + return 0;
> > +}
> > +
> > +static int clcdfb_of_get_mode(struct device *dev, struct device_node *panel,
> > + struct clcd_panel *clcd_panel)
> > +{
> > + int err;
> > + struct fb_videomode *mode;
> > + char *name;
> > + int len;
> > +
> > + /* Only directly connected DPI panels supported for now */
> > + if (of_device_is_compatible(panel, "panel-dpi"))
> > + err = clcdfb_of_get_dpi_panel_mode(panel, clcd_panel);
> > + else
> > + err = -ENOENT;
> > + if (err)
> > + return err;
> > + mode = &clcd_panel->mode;
> > +
> > + len = clcdfb_snprintf_mode(NULL, 0, mode);
> > + name = devm_kzalloc(dev, len + 1, GFP_KERNEL);
> > + if (!name)
> > + return -ENOMEM;
> > +
> > + clcdfb_snprintf_mode(name, len + 1, mode);
> > + mode->name = name;
> > +
> > + return 0;
> > +}
> > +
> > +static int clcdfb_of_init_tft_panel(struct clcd_fb *fb, u32 r0, u32 g0, u32 b0)
> > +{
> > + static struct {
> > + unsigned int part;
> > + u32 r0, g0, b0;
> > + u32 caps;
> > + } panels[] = {
> > + { 0x110, 1, 7, 13, CLCD_CAP_5551 },
> > + { 0x110, 0, 8, 16, CLCD_CAP_888 },
> > + { 0x110, 16, 8, 0, CLCD_CAP_888 },
> > + { 0x111, 4, 14, 20, CLCD_CAP_444 },
> > + { 0x111, 3, 11, 19, CLCD_CAP_444 | CLCD_CAP_5551 },
> > + { 0x111, 3, 10, 19, CLCD_CAP_444 | CLCD_CAP_5551 |
> > + CLCD_CAP_565 },
> > + { 0x111, 0, 8, 16, CLCD_CAP_444 | CLCD_CAP_5551 |
> > + CLCD_CAP_565 | CLCD_CAP_888 },
> > + };
> > + int i;
> > +
> > + /* Bypass pixel clock divider */
> > + fb->panel->tim2 |= TIM2_BCD;
> > +
> > + /* TFT display, vert. comp. interrupt at the start of the back porch */
> > + fb->panel->cntl |= CNTL_LCDTFT | CNTL_LCDVCOMP(1);
> > +
> > + fb->panel->caps = 0;
> > +
> > + /* Match the setup with known variants */
> > + for (i = 0; i < ARRAY_SIZE(panels) && !fb->panel->caps; i++) {
> > + if (amba_part(fb->dev) != panels[i].part)
> > + continue;
> > + if (g0 != panels[i].g0)
> > + continue;
> > + if (r0 == panels[i].r0 && b0 == panels[i].b0)
> > + fb->panel->caps = panels[i].caps;
> > + }
> > +
> > + /*
> > + * If we actually physically connected the R lines to B and
> > + * vice versa
> > + */
> > + if (r0 != 0 && b0 == 0)
> > + fb->panel->bgr_connection = true;
> > +
> > + return fb->panel->caps ? 0 : -EINVAL;
> > +}
> > +
> > +static int clcdfb_of_init_display(struct clcd_fb *fb)
> > +{
> > + struct device_node *endpoint, *panel;
> > + int err;
> > + unsigned int bpp;
> > + u32 max_bandwidth;
> > + u32 tft_r0b0g0[3];
> > +
> > + fb->panel = devm_kzalloc(&fb->dev->dev, sizeof(*fb->panel), GFP_KERNEL);
> > + if (!fb->panel)
> > + return -ENOMEM;
> > +
> > + /*
> > + * Fetch the panel endpoint.
> > + */
> > + endpoint = of_graph_get_next_endpoint(fb->dev->dev.of_node, NULL);
> > + if (!endpoint)
> > + return -ENODEV;
> > +
> > + panel = of_graph_get_remote_port_parent(endpoint);
> > + if (!panel)
> > + return -ENODEV;
> > +
> > + err = clcdfb_of_get_backlight(&fb->dev->dev, fb->panel);
> > + if (err)
> > + return err;
> > +
> > + err = clcdfb_of_get_mode(&fb->dev->dev, panel, fb->panel);
> > + if (err)
> > + return err;
> > +
> > + err = of_property_read_u32(fb->dev->dev.of_node, "max-memory-bandwidth",
> > + &max_bandwidth);
> > + if (!err) {
> > + /*
> > + * max_bandwidth is in bytes per second and pixclock in
> > + * pico-seconds, so the maximum allowed bits per pixel is
> > + * 8 * max_bandwidth / (PICOS2KHZ(pixclock) * 1000)
> > + * Rearrange this calculation to avoid overflow and then ensure
> > + * result is a valid format.
> > + */
> > + bpp = max_bandwidth / (1000 / 8)
> > + / PICOS2KHZ(fb->panel->mode.pixclock);
> > + bpp = rounddown_pow_of_two(bpp);
> > + if (bpp > 32)
> > + bpp = 32;
> > + } else
> > + bpp = 32;
> > + fb->panel->bpp = bpp;
> > +
> > +#ifdef CONFIG_CPU_BIG_ENDIAN
> > + fb->panel->cntl |= CNTL_BEBO;
> > +#endif
> > + fb->panel->width = -1;
> > + fb->panel->height = -1;
> > +
> > + if (of_property_read_u32_array(endpoint,
> > + "arm,pl11x,tft-r0g0b0-pads",
> > + tft_r0b0g0, ARRAY_SIZE(tft_r0b0g0)) != 0)
> > + return -ENOENT;
> > +
> > + return clcdfb_of_init_tft_panel(fb, tft_r0b0g0[0],
> > + tft_r0b0g0[1], tft_r0b0g0[2]);
> > +}
> > +
> > +static int clcdfb_of_vram_setup(struct clcd_fb *fb)
> > +{
> > + int err;
> > + struct device_node *memory;
> > + u64 size;
> > +
> > + err = clcdfb_of_init_display(fb);
> > + if (err)
> > + return err;
> > +
> > + memory = of_parse_phandle(fb->dev->dev.of_node, "memory-region", 0);
> > + if (!memory)
> > + return -ENODEV;
> > +
> > + fb->fb.screen_base = of_iomap(memory, 0);
> > + if (!fb->fb.screen_base)
> > + return -ENOMEM;
> > +
> > + fb->fb.fix.smem_start = of_translate_address(memory,
> > + of_get_address(memory, 0, &size, NULL));
> > + fb->fb.fix.smem_len = size;
> > +
> > + return 0;
> > +}
> > +
> > +static int clcdfb_of_vram_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
> > +{
> > + unsigned long off, user_size, kernel_size;
> > +
> > +
> > + off = vma->vm_pgoff << PAGE_SHIFT;
> > + user_size = vma->vm_end - vma->vm_start;
> > + kernel_size = fb->fb.fix.smem_len;
> > +
> > + if (off >= kernel_size || user_size > (kernel_size - off))
> > + return -ENXIO;
> > +
> > + return remap_pfn_range(vma, vma->vm_start,
> > + __phys_to_pfn(fb->fb.fix.smem_start) + vma->vm_pgoff,
> > + user_size,
> > + pgprot_writecombine(vma->vm_page_prot));
> > +}
> > +
> > +static void clcdfb_of_vram_remove(struct clcd_fb *fb)
> > +{
> > + iounmap(fb->fb.screen_base);
> > +}
> > +
> > +static int clcdfb_of_dma_setup(struct clcd_fb *fb)
> > +{
> > + unsigned long framesize;
> > + dma_addr_t dma;
> > + int err;
> > +
> > + err = clcdfb_of_init_display(fb);
> > + if (err)
> > + return err;
> > +
> > + framesize = PAGE_ALIGN(fb->panel->mode.xres * fb->panel->mode.yres *
> > + fb->panel->bpp / 8);
> > + fb->fb.screen_base = dma_alloc_coherent(&fb->dev->dev, framesize,
> > + &dma, GFP_KERNEL);
> > + if (!fb->fb.screen_base)
> > + return -ENOMEM;
> > +
> > + fb->fb.fix.smem_start = dma;
> > + fb->fb.fix.smem_len = framesize;
> > +
> > + return 0;
> > +}
> > +
> > +static int clcdfb_of_dma_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
> > +{
> > + return dma_mmap_wc(&fb->dev->dev, vma, fb->fb.screen_base,
> > + fb->fb.fix.smem_start, fb->fb.fix.smem_len);
> > +}
> > +
> > +static void clcdfb_of_dma_remove(struct clcd_fb *fb)
> > +{
> > + dma_free_coherent(&fb->dev->dev, fb->fb.fix.smem_len,
> > + fb->fb.screen_base, fb->fb.fix.smem_start);
> > +}
> > +
> > +static struct clcd_board *clcdfb_of_get_board(struct amba_device *dev)
> > +{
> > + struct clcd_board *board = devm_kzalloc(&dev->dev, sizeof(*board),
> > + GFP_KERNEL);
> > + struct device_node *node = dev->dev.of_node;
> > +
> > + if (!board)
> > + return NULL;
> > +
> > + board->name = of_node_full_name(node);
> > + board->caps = CLCD_CAP_ALL;
> > + board->check = clcdfb_check;
> > + board->decode = clcdfb_decode;
> > + if (of_find_property(node, "memory-region", NULL)) {
> > + board->setup = clcdfb_of_vram_setup;
> > + board->mmap = clcdfb_of_vram_mmap;
> > + board->remove = clcdfb_of_vram_remove;
> > + } else {
> > + board->setup = clcdfb_of_dma_setup;
> > + board->mmap = clcdfb_of_dma_mmap;
> > + board->remove = clcdfb_of_dma_remove;
> > + }
> > +
> > + return board;
> > +}
> > +#else
> > +static struct clcd_board *clcdfb_of_get_board(struct amba_device *dev)
> > +{
> > + return NULL;
> > +}
> > +#endif
> > +
> > +static int clcdfb_probe(struct amba_device *dev, const struct amba_id *id)
> > +{
> > + struct clcd_board *board = dev_get_platdata(&dev->dev);
> > + struct clcd_fb *fb;
> > + int ret;
> > +
> > + if (!board)
> > + board = clcdfb_of_get_board(dev);
> > +
> > + if (!board)
> > + return -EINVAL;
> > +
> > + ret = dma_set_mask_and_coherent(&dev->dev, DMA_BIT_MASK(32));
> > + if (ret)
> > + goto out;
> > +
> > + ret = amba_request_regions(dev, NULL);
> > + if (ret) {
> > + printk(KERN_ERR "CLCD: unable to reserve regs region\n");
> > + goto out;
> > + }
> > +
> > + fb = kzalloc(sizeof(*fb), GFP_KERNEL);
> > + if (!fb) {
> > + ret = -ENOMEM;
> > + goto free_region;
> > + }
> > +
> > + fb->dev = dev;
> > + fb->board = board;
> > +
> > + dev_info(&fb->dev->dev, "PL%03x designer %02x rev%u at 0x%08llx\n",
> > + amba_part(dev), amba_manf(dev), amba_rev(dev),
> > + (unsigned long long)dev->res.start);
> > +
> > + ret = fb->board->setup(fb);
> > + if (ret)
> > + goto free_fb;
> > +
> > + ret = clcdfb_register(fb);
> > + if (ret == 0) {
> > + amba_set_drvdata(dev, fb);
> > + goto out;
> > + }
> > +
> > + fb->board->remove(fb);
> > + free_fb:
> > + kfree(fb);
> > + free_region:
> > + amba_release_regions(dev);
> > + out:
> > + return ret;
> > +}
> > +
> > +static int clcdfb_remove(struct amba_device *dev)
> > +{
> > + struct clcd_fb *fb = amba_get_drvdata(dev);
> > +
> > + clcdfb_disable(fb);
> > + unregister_framebuffer(&fb->fb);
> > + if (fb->fb.cmap.len)
> > + fb_dealloc_cmap(&fb->fb.cmap);
> > + iounmap(fb->regs);
> > + clk_unprepare(fb->clk);
> > + clk_put(fb->clk);
> > +
> > + fb->board->remove(fb);
> > +
> > + kfree(fb);
> > +
> > + amba_release_regions(dev);
> > +
> > + return 0;
> > +}
> > +
> > +static const struct amba_id clcdfb_id_table[] = {
> > + {
> > + .id = 0x00041110,
> > + .mask = 0x000ffffe,
> > + },
> > + { 0, 0 },
> > +};
> > +
> > +MODULE_DEVICE_TABLE(amba, clcdfb_id_table);
> > +
> > +static struct amba_driver clcd_driver = {
> > + .drv = {
> > + .name = "clcd-pl11x",
> > + },
> > + .probe = clcdfb_probe,
> > + .remove = clcdfb_remove,
> > + .id_table = clcdfb_id_table,
> > +};
> > +
> > +static int __init amba_clcdfb_init(void)
> > +{
> > + if (fb_get_options("ambafb", NULL))
> > + return -ENODEV;
> > +
> > + return amba_driver_register(&clcd_driver);
> > +}
> > +
> > +module_init(amba_clcdfb_init);
> > +
> > +static void __exit amba_clcdfb_exit(void)
> > +{
> > + amba_driver_unregister(&clcd_driver);
> > +}
> > +
> > +module_exit(amba_clcdfb_exit);
> > +
> > +MODULE_DESCRIPTION("ARM PrimeCell PL110 CLCD core driver");
> > +MODULE_LICENSE("GPL");
> > diff --git a/include/linux/amba/clcd-regs.h b/include/linux/amba/clcd-regs.h
> > new file mode 100644
> > index 000000000000..421b0fa90d6a
> > --- /dev/null
> > +++ b/include/linux/amba/clcd-regs.h
> > @@ -0,0 +1,87 @@
> > +/*
> > + * David A Rusling
> > + *
> > + * Copyright (C) 2001 ARM Limited
> > + *
> > + * This file is subject to the terms and conditions of the GNU General Public
> > + * License. See the file COPYING in the main directory of this archive
> > + * for more details.
> > + */
> > +
> > +#ifndef AMBA_CLCD_REGS_H
> > +#define AMBA_CLCD_REGS_H
> > +
> > +/*
> > + * CLCD Controller Internal Register addresses
> > + */
> > +#define CLCD_TIM0 0x00000000
> > +#define CLCD_TIM1 0x00000004
> > +#define CLCD_TIM2 0x00000008
> > +#define CLCD_TIM3 0x0000000c
> > +#define CLCD_UBAS 0x00000010
> > +#define CLCD_LBAS 0x00000014
> > +
> > +#define CLCD_PL110_IENB 0x00000018
> > +#define CLCD_PL110_CNTL 0x0000001c
> > +#define CLCD_PL110_STAT 0x00000020
> > +#define CLCD_PL110_INTR 0x00000024
> > +#define CLCD_PL110_UCUR 0x00000028
> > +#define CLCD_PL110_LCUR 0x0000002C
> > +
> > +#define CLCD_PL111_CNTL 0x00000018
> > +#define CLCD_PL111_IENB 0x0000001c
> > +#define CLCD_PL111_RIS 0x00000020
> > +#define CLCD_PL111_MIS 0x00000024
> > +#define CLCD_PL111_ICR 0x00000028
> > +#define CLCD_PL111_UCUR 0x0000002c
> > +#define CLCD_PL111_LCUR 0x00000030
> > +
> > +#define CLCD_PALL 0x00000200
> > +#define CLCD_PALETTE 0x00000200
> > +
> > +#define TIM2_PCD_LO_MASK GENMASK(4, 0)
> > +#define TIM2_PCD_LO_BITS 5
> > +#define TIM2_CLKSEL (1 << 5)
> > +#define TIM2_ACB_MASK GENMASK(10, 6)
> > +#define TIM2_IVS (1 << 11)
> > +#define TIM2_IHS (1 << 12)
> > +#define TIM2_IPC (1 << 13)
> > +#define TIM2_IOE (1 << 14)
> > +#define TIM2_BCD (1 << 26)
> > +#define TIM2_PCD_HI_MASK GENMASK(31, 27)
> > +#define TIM2_PCD_HI_BITS 5
> > +#define TIM2_PCD_HI_SHIFT 27
> > +
> > +#define CNTL_LCDEN (1 << 0)
> > +#define CNTL_LCDBPP1 (0 << 1)
> > +#define CNTL_LCDBPP2 (1 << 1)
> > +#define CNTL_LCDBPP4 (2 << 1)
> > +#define CNTL_LCDBPP8 (3 << 1)
> > +#define CNTL_LCDBPP16 (4 << 1)
> > +#define CNTL_LCDBPP16_565 (6 << 1)
> > +#define CNTL_LCDBPP16_444 (7 << 1)
> > +#define CNTL_LCDBPP24 (5 << 1)
> > +#define CNTL_LCDBW (1 << 4)
> > +#define CNTL_LCDTFT (1 << 5)
> > +#define CNTL_LCDMONO8 (1 << 6)
> > +#define CNTL_LCDDUAL (1 << 7)
> > +#define CNTL_BGR (1 << 8)
> > +#define CNTL_BEBO (1 << 9)
> > +#define CNTL_BEPO (1 << 10)
> > +#define CNTL_LCDPWR (1 << 11)
> > +#define CNTL_LCDVCOMP(x) ((x) << 12)
> > +#define CNTL_LDMAFIFOTIME (1 << 15)
> > +#define CNTL_WATERMARK (1 << 16)
> > +
> > +/* ST Microelectronics variant bits */
> > +#define CNTL_ST_1XBPP_444 0x0
> > +#define CNTL_ST_1XBPP_5551 (1 << 17)
> > +#define CNTL_ST_1XBPP_565 (1 << 18)
> > +#define CNTL_ST_CDWID_12 0x0
> > +#define CNTL_ST_CDWID_16 (1 << 19)
> > +#define CNTL_ST_CDWID_18 (1 << 20)
> > +#define CNTL_ST_CDWID_24 ((1 << 19)|(1 << 20))
> > +#define CNTL_ST_CEAEN (1 << 21)
> > +#define CNTL_ST_LCDBPP24_PACKED (6 << 1)
> > +
> > +#endif /* AMBA_CLCD_REGS_H */
> > diff --git a/include/linux/amba/clcd.h b/include/linux/amba/clcd.h
> > new file mode 100644
> > index 000000000000..b6e0cbeaf533
> > --- /dev/null
> > +++ b/include/linux/amba/clcd.h
> > @@ -0,0 +1,290 @@
> > +/*
> > + * linux/include/asm-arm/hardware/amba_clcd.h -- Integrator LCD panel.
> > + *
> > + * David A Rusling
> > + *
> > + * Copyright (C) 2001 ARM Limited
> > + *
> > + * This file is subject to the terms and conditions of the GNU General Public
> > + * License. See the file COPYING in the main directory of this archive
> > + * for more details.
> > + */
> > +#include <linux/fb.h>
> > +#include <linux/amba/clcd-regs.h>
> > +
> > +enum {
> > + /* individual formats */
> > + CLCD_CAP_RGB444 = (1 << 0),
> > + CLCD_CAP_RGB5551 = (1 << 1),
> > + CLCD_CAP_RGB565 = (1 << 2),
> > + CLCD_CAP_RGB888 = (1 << 3),
> > + CLCD_CAP_BGR444 = (1 << 4),
> > + CLCD_CAP_BGR5551 = (1 << 5),
> > + CLCD_CAP_BGR565 = (1 << 6),
> > + CLCD_CAP_BGR888 = (1 << 7),
> > +
> > + /* connection layouts */
> > + CLCD_CAP_444 = CLCD_CAP_RGB444 | CLCD_CAP_BGR444,
> > + CLCD_CAP_5551 = CLCD_CAP_RGB5551 | CLCD_CAP_BGR5551,
> > + CLCD_CAP_565 = CLCD_CAP_RGB565 | CLCD_CAP_BGR565,
> > + CLCD_CAP_888 = CLCD_CAP_RGB888 | CLCD_CAP_BGR888,
> > +
> > + /* red/blue ordering */
> > + CLCD_CAP_RGB = CLCD_CAP_RGB444 | CLCD_CAP_RGB5551 |
> > + CLCD_CAP_RGB565 | CLCD_CAP_RGB888,
> > + CLCD_CAP_BGR = CLCD_CAP_BGR444 | CLCD_CAP_BGR5551 |
> > + CLCD_CAP_BGR565 | CLCD_CAP_BGR888,
> > +
> > + CLCD_CAP_ALL = CLCD_CAP_BGR | CLCD_CAP_RGB,
> > +};
> > +
> > +struct backlight_device;
> > +
> > +struct clcd_panel {
> > + struct fb_videomode mode;
> > + signed short width; /* width in mm */
> > + signed short height; /* height in mm */
> > + u32 tim2;
> > + u32 tim3;
> > + u32 cntl;
> > + u32 caps;
> > + unsigned int bpp:8,
> > + fixedtimings:1,
> > + grayscale:1;
> > + unsigned int connector;
> > + struct backlight_device *backlight;
> > + /*
> > + * If the B/R lines are switched between the CLCD
> > + * and the panel we need to know this and not try to
> > + * compensate with the BGR bit in the control register.
> > + */
> > + bool bgr_connection;
> > +};
> > +
> > +struct clcd_regs {
> > + u32 tim0;
> > + u32 tim1;
> > + u32 tim2;
> > + u32 tim3;
> > + u32 cntl;
> > + unsigned long pixclock;
> > +};
> > +
> > +struct clcd_fb;
> > +
> > +/*
> > + * the board-type specific routines
> > + */
> > +struct clcd_board {
> > + const char *name;
> > +
> > + /*
> > + * Optional. Hardware capability flags.
> > + */
> > + u32 caps;
> > +
> > + /*
> > + * Optional. Check whether the var structure is acceptable
> > + * for this display.
> > + */
> > + int (*check)(struct clcd_fb *fb, struct fb_var_screeninfo *var);
> > +
> > + /*
> > + * Compulsory. Decode fb->fb.var into regs->*. In the case of
> > + * fixed timing, set regs->* to the register values required.
> > + */
> > + void (*decode)(struct clcd_fb *fb, struct clcd_regs *regs);
> > +
> > + /*
> > + * Optional. Disable any extra display hardware.
> > + */
> > + void (*disable)(struct clcd_fb *);
> > +
> > + /*
> > + * Optional. Enable any extra display hardware.
> > + */
> > + void (*enable)(struct clcd_fb *);
> > +
> > + /*
> > + * Setup platform specific parts of CLCD driver
> > + */
> > + int (*setup)(struct clcd_fb *);
> > +
> > + /*
> > + * mmap the framebuffer memory
> > + */
> > + int (*mmap)(struct clcd_fb *, struct vm_area_struct *);
> > +
> > + /*
> > + * Remove platform specific parts of CLCD driver
> > + */
> > + void (*remove)(struct clcd_fb *);
> > +};
> > +
> > +struct amba_device;
> > +struct clk;
> > +
> > +/* this data structure describes each frame buffer device we find */
> > +struct clcd_fb {
> > + struct fb_info fb;
> > + struct amba_device *dev;
> > + struct clk *clk;
> > + struct clcd_panel *panel;
> > + struct clcd_board *board;
> > + void *board_data;
> > + void __iomem *regs;
> > + u16 off_ienb;
> > + u16 off_cntl;
> > + u32 clcd_cntl;
> > + u32 cmap[16];
> > + bool clk_enabled;
> > +};
> > +
> > +static inline void clcdfb_decode(struct clcd_fb *fb, struct clcd_regs *regs)
> > +{
> > + struct fb_var_screeninfo *var = &fb->fb.var;
> > + u32 val, cpl;
> > +
> > + /*
> > + * Program the CLCD controller registers and start the CLCD
> > + */
> > + val = ((var->xres / 16) - 1) << 2;
> > + val |= (var->hsync_len - 1) << 8;
> > + val |= (var->right_margin - 1) << 16;
> > + val |= (var->left_margin - 1) << 24;
> > + regs->tim0 = val;
> > +
> > + val = var->yres;
> > + if (fb->panel->cntl & CNTL_LCDDUAL)
> > + val /= 2;
> > + val -= 1;
> > + val |= (var->vsync_len - 1) << 10;
> > + val |= var->lower_margin << 16;
> > + val |= var->upper_margin << 24;
> > + regs->tim1 = val;
> > +
> > + val = fb->panel->tim2;
> > + val |= var->sync & FB_SYNC_HOR_HIGH_ACT ? 0 : TIM2_IHS;
> > + val |= var->sync & FB_SYNC_VERT_HIGH_ACT ? 0 : TIM2_IVS;
> > +
> > + cpl = var->xres_virtual;
> > + if (fb->panel->cntl & CNTL_LCDTFT) /* TFT */
> > + /* / 1 */;
> > + else if (!var->grayscale) /* STN color */
> > + cpl = cpl * 8 / 3;
> > + else if (fb->panel->cntl & CNTL_LCDMONO8) /* STN monochrome, 8bit */
> > + cpl /= 8;
> > + else /* STN monochrome, 4bit */
> > + cpl /= 4;
> > +
> > + regs->tim2 = val | ((cpl - 1) << 16);
> > +
> > + regs->tim3 = fb->panel->tim3;
> > +
> > + val = fb->panel->cntl;
> > + if (var->grayscale)
> > + val |= CNTL_LCDBW;
> > +
> > + if (fb->panel->caps && fb->board->caps && var->bits_per_pixel >= 16) {
> > + /*
> > + * if board and panel supply capabilities, we can support
> > + * changing BGR/RGB depending on supplied parameters. Here
> > + * we switch to what the framebuffer is providing if need
> > + * be, so if the framebuffer is BGR but the display connection
> > + * is RGB (first case) we switch it around. Vice versa mutatis
> > + * mutandis if the framebuffer is RGB but the display connection
> > + * is BGR, we flip it around.
> > + */
> > + if (var->red.offset == 0)
> > + val &= ~CNTL_BGR;
> > + else
> > + val |= CNTL_BGR;
> > + if (fb->panel->bgr_connection)
> > + val ^= CNTL_BGR;
> > + }
> > +
> > + switch (var->bits_per_pixel) {
> > + case 1:
> > + val |= CNTL_LCDBPP1;
> > + break;
> > + case 2:
> > + val |= CNTL_LCDBPP2;
> > + break;
> > + case 4:
> > + val |= CNTL_LCDBPP4;
> > + break;
> > + case 8:
> > + val |= CNTL_LCDBPP8;
> > + break;
> > + case 16:
> > + /*
> > + * PL110 cannot choose between 5551 and 565 modes in its
> > + * control register. It is possible to use 565 with
> > + * custom external wiring.
> > + */
> > + if (amba_part(fb->dev) == 0x110 ||
> > + var->green.length == 5)
> > + val |= CNTL_LCDBPP16;
> > + else if (var->green.length == 6)
> > + val |= CNTL_LCDBPP16_565;
> > + else
> > + val |= CNTL_LCDBPP16_444;
> > + break;
> > + case 32:
> > + val |= CNTL_LCDBPP24;
> > + break;
> > + }
> > +
> > + regs->cntl = val;
> > + regs->pixclock = var->pixclock;
> > +}
> > +
> > +static inline int clcdfb_check(struct clcd_fb *fb, struct fb_var_screeninfo *var)
> > +{
> > + var->xres_virtual = var->xres = (var->xres + 15) & ~15;
> > + var->yres_virtual = var->yres = (var->yres + 1) & ~1;
> > +
> > +#define CHECK(e,l,h) (var->e < l || var->e > h)
> > + if (CHECK(right_margin, (5+1), 256) || /* back porch */
> > + CHECK(left_margin, (5+1), 256) || /* front porch */
> > + CHECK(hsync_len, (5+1), 256) ||
> > + var->xres > 4096 ||
> > + var->lower_margin > 255 || /* back porch */
> > + var->upper_margin > 255 || /* front porch */
> > + var->vsync_len > 32 ||
> > + var->yres > 1024)
> > + return -EINVAL;
> > +#undef CHECK
> > +
> > + /* single panel mode: PCD = max(PCD, 1) */
> > + /* dual panel mode: PCD = max(PCD, 5) */
> > +
> > + /*
> > + * You can't change the grayscale setting, and
> > + * we can only do non-interlaced video.
> > + */
> > + if (var->grayscale != fb->fb.var.grayscale ||
> > + (var->vmode & FB_VMODE_MASK) != FB_VMODE_NONINTERLACED)
> > + return -EINVAL;
> > +
> > +#define CHECK(e) (var->e != fb->fb.var.e)
> > + if (fb->panel->fixedtimings &&
> > + (CHECK(xres) ||
> > + CHECK(yres) ||
> > + CHECK(bits_per_pixel) ||
> > + CHECK(pixclock) ||
> > + CHECK(left_margin) ||
> > + CHECK(right_margin) ||
> > + CHECK(upper_margin) ||
> > + CHECK(lower_margin) ||
> > + CHECK(hsync_len) ||
> > + CHECK(vsync_len) ||
> > + CHECK(sync)))
> > + return -EINVAL;
> > +#undef CHECK
> > +
> > + var->nonstd = 0;
> > + var->accel_flags = 0;
> > +
> > + return 0;
> > +}
> >
>
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
More information about the linux-arm-kernel
mailing list