[PATCH] ARM: dts: stm32: Fix DH PDK2 display PWM channel

[Alexandre Torgue]

On 9/23/20 6:04 PM, Marek Vasut wrote:
> On 9/23/20 4:32 PM, Alexandre Torgue wrote:
>> Hi Marek
> 
> Hi,
> 
>> On 8/22/20 10:32 PM, Marek Vasut wrote:
>>> The display PWM channel is number 3 (PWM2 CH4), make it so.
>>>
>>> Signed-off-by: Marek Vasut <marex at denx.de>
>>> Cc: Alexandre Torgue <alexandre.torgue at st.com>
>>> Cc: Maxime Coquelin <mcoquelin.stm32 at gmail.com>
>>> Cc: Patrice Chotard <patrice.chotard at st.com>
>>> Cc: Patrick Delaunay <patrick.delaunay at st.com>
>>> Cc: linux-stm32 at st-md-mailman.stormreply.com
>>> To: linux-arm-kernel at lists.infradead.org
>>> ---
>>>    arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi | 2 +-
>>>    1 file changed, 1 insertion(+), 1 deletion(-)
>>>
>>> diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
>>> b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
>>> index 7c4bd615b311..075e2a95713f 100644
>>> --- a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
>>> +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
>>> @@ -26,7 +26,7 @@ clk_ext_audio_codec: clock-codec {
>>>          display_bl: display-bl {
>>>            compatible = "pwm-backlight";
>>> -        pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
>>> +        pwms = <&pwm2 3 500000 PWM_POLARITY_INVERTED>;
>>>            brightness-levels = <0 16 22 30 40 55 75 102 138 188 255>;
>>>            default-brightness-level = <8>;
>>>            enable-gpios = <&gpioi 0 GPIO_ACTIVE_HIGH>;
>>>
>>
>>
>> Applied on stm32-next.
> 
> Don't you want to pick the one with the Fixes: tag ? :)
> 

Yes I did. I just responded on the bad one ;)