[PATCH 1/4] ARM/omap1: switch to use dma_direct_set_offset for lbus DMA offsets

[Christoph Hellwig]

Switch the omap1510 platform ohci device to use dma_direct_set_offset
to set the DMA offset instead of using direct hooks into the DMA
mapping code and remove the now unused hooks.

Signed-off-by: Christoph Hellwig <hch at lst.de>
---
 arch/arm/include/asm/dma-direct.h         | 18 -------------
 arch/arm/mach-omap1/include/mach/memory.h | 31 -----------------------
 arch/arm/mach-omap1/usb.c                 | 22 ++++++++++++++++
 3 files changed, 22 insertions(+), 49 deletions(-)

diff --git a/arch/arm/include/asm/dma-direct.h b/arch/arm/include/asm/dma-direct.h
index 436544aeb83405..77fcb7ee5ec907 100644
--- a/arch/arm/include/asm/dma-direct.h
+++ b/arch/arm/include/asm/dma-direct.h
@@ -9,7 +9,6 @@
  * functions used internally by the DMA-mapping API to provide DMA
  * addresses. They must not be used by drivers.
  */
-#ifndef __arch_pfn_to_dma
 static inline dma_addr_t pfn_to_dma(struct device *dev, unsigned long pfn)
 {
 	if (dev && dev->dma_range_map)
@@ -34,23 +33,6 @@ static inline dma_addr_t virt_to_dma(struct device *dev, void *addr)
 	return (dma_addr_t)__virt_to_bus((unsigned long)(addr));
 }
 
-#else
-static inline dma_addr_t pfn_to_dma(struct device *dev, unsigned long pfn)
-{
-	return __arch_pfn_to_dma(dev, pfn);
-}
-
-static inline unsigned long dma_to_pfn(struct device *dev, dma_addr_t addr)
-{
-	return __arch_dma_to_pfn(dev, addr);
-}
-
-static inline dma_addr_t virt_to_dma(struct device *dev, void *addr)
-{
-	return __arch_virt_to_dma(dev, addr);
-}
-#endif
-
 static inline dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)
 {
 	unsigned int offset = paddr & ~PAGE_MASK;
diff --git a/arch/arm/mach-omap1/include/mach/memory.h b/arch/arm/mach-omap1/include/mach/memory.h
index 1142560e0078f5..36bc0000cb6ab8 100644
--- a/arch/arm/mach-omap1/include/mach/memory.h
+++ b/arch/arm/mach-omap1/include/mach/memory.h
@@ -14,42 +14,11 @@
  * OMAP-1510 bus address is translated into a Local Bus address if the
  * OMAP bus type is lbus. We do the address translation based on the
  * device overriding the defaults used in the dma-mapping API.
- * Note that the is_lbus_device() test is not very efficient on 1510
- * because of the strncmp().
  */
-#if defined(CONFIG_ARCH_OMAP15XX) && !defined(__ASSEMBLER__)
 
 /*
  * OMAP-1510 Local Bus address offset
  */
 #define OMAP1510_LB_OFFSET	UL(0x30000000)
 
-#define virt_to_lbus(x)		((x) - PAGE_OFFSET + OMAP1510_LB_OFFSET)
-#define lbus_to_virt(x)		((x) - OMAP1510_LB_OFFSET + PAGE_OFFSET)
-#define is_lbus_device(dev)	(cpu_is_omap15xx() && dev && (strncmp(dev_name(dev), "ohci", 4) == 0))
-
-#define __arch_pfn_to_dma(dev, pfn)	\
-	({ dma_addr_t __dma = __pfn_to_phys(pfn); \
-	   if (is_lbus_device(dev)) \
-		__dma = __dma - PHYS_OFFSET + OMAP1510_LB_OFFSET; \
-	   __dma; })
-
-#define __arch_dma_to_pfn(dev, addr)	\
-	({ dma_addr_t __dma = addr;				\
-	   if (is_lbus_device(dev))				\
-		__dma += PHYS_OFFSET - OMAP1510_LB_OFFSET;	\
-	   __phys_to_pfn(__dma);				\
-	})
-
-#define __arch_dma_to_virt(dev, addr)	({ (void *) (is_lbus_device(dev) ? \
-						lbus_to_virt(addr) : \
-						__phys_to_virt(addr)); })
-
-#define __arch_virt_to_dma(dev, addr)	({ unsigned long __addr = (unsigned long)(addr); \
-					   (dma_addr_t) (is_lbus_device(dev) ? \
-						virt_to_lbus(__addr) : \
-						__virt_to_phys(__addr)); })
-
-#endif	/* CONFIG_ARCH_OMAP15XX */
-
 #endif
diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c
index d8e9bbda8f7bdd..ba8566204ea9f4 100644
--- a/arch/arm/mach-omap1/usb.c
+++ b/arch/arm/mach-omap1/usb.c
@@ -9,6 +9,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
 #include <linux/io.h>
 
 #include <asm/irq.h>
@@ -542,6 +543,25 @@ static u32 __init omap1_usb2_init(unsigned nwires, unsigned alt_pingroup)
 /* ULPD_APLL_CTRL */
 #define APLL_NDPLL_SWITCH	(1 << 0)
 
+static int omap_1510_usb_ohci_notifier(struct notifier_block *nb,
+		unsigned long event, void *data)
+{
+	struct device *dev = data;
+
+	if (event != BUS_NOTIFY_ADD_DEVICE)
+		return NOTIFY_DONE;
+
+	if (strncmp(dev_name(dev), "ohci", 4) == 0 &&
+	    dma_direct_set_offset(dev, PHYS_OFFSET, OMAP1510_LB_OFFSET,
+			(u64)-1))
+		WARN_ONCE(1, "failed to set DMA offset\n");
+	return NOTIFY_OK;
+}
+
+static struct notifier_block omap_1510_usb_ohci_nb = {
+	.notifier_call		= omap_1510_usb_ohci_notifier,
+};
+
 static void __init omap_1510_usb_init(struct omap_usb_config *config)
 {
 	unsigned int val;
@@ -600,6 +620,8 @@ static void __init omap_1510_usb_init(struct omap_usb_config *config)
 	if (config->register_host) {
 		int status;
 
+		bus_register_notifier(&platform_bus_type,
+				      &omap_1510_usb_ohci_nb);
 		ohci_device.dev.platform_data = config;
 		status = platform_device_register(&ohci_device);
 		if (status)
-- 
2.28.0