[PATCH 1/2] arm64: dts: imx8mq-evk: Add MIPI DSI support

[Guido Günther]

Hi,
On Mon, Sep 14, 2020 at 11:38:46AM -0300, Fabio Estevam wrote:
> imx8mq-evk has a MIPI DSI port that can be used to connect a Raydium
> RM67191 panel.
> 
> Add support for it.

This looks good regarding the DTS changes but i don't know if this is a
reasonable default for the EVK so i'm doing a:

Acked-by: Guido Günther <agx at sigxcpu.org> 

Cheers,
 -- Guido

> 
> Signed-off-by: Fabio Estevam <festevam at gmail.com>
> ---
>  arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 44 ++++++++++++++++++++
>  1 file changed, 44 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
> index 7c6808814856..2418cca00bc5 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
> @@ -132,6 +132,10 @@
>  	};
>  };
>  
> +&dphy {
> +	status = "okay";
> +};
> +
>  &fec1 {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&pinctrl_fec1>;
> @@ -255,6 +259,40 @@
>  	};
>  };
>  
> +&lcdif {
> +	status = "okay";
> +};
> +
> +&mipi_dsi {
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +	status = "okay";
> +
> +	panel at 0 {
> +		pinctrl-0 = <&pinctrl_mipi_dsi>;
> +		pinctrl-names = "default";
> +		compatible = "raydium,rm67191";
> +		reg = <0>;
> +		reset-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>;
> +		dsi-lanes = <4>;
> +
> +		port {
> +			panel_in: endpoint {
> +				remote-endpoint = <&mipi_dsi_out>;
> +			};
> +		};
> +	};
> +
> +	ports {
> +		port at 1 {
> +			reg = <1>;
> +			mipi_dsi_out: endpoint {
> +				remote-endpoint = <&panel_in>;
> +			};
> +		};
> +	};
> +};
> +
>  &pcie0 {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&pinctrl_pcie0>;
> @@ -388,6 +426,12 @@
>  		>;
>  	};
>  
> +	pinctrl_mipi_dsi: mipidsigrp {
> +		fsl,pins = <
> +			MX8MQ_IOMUXC_ECSPI1_SCLK_GPIO5_IO6		0x16
> +		>;
> +	};
> +
>  	pinctrl_pcie0: pcie0grp {
>  		fsl,pins = <
>  			MX8MQ_IOMUXC_I2C4_SCL_PCIE1_CLKREQ_B		0x76
> -- 
> 2.17.1
>