[PATCH 1/3] dt: bindings: mmc: Add phase control properties for the Aspeed SDHCI

[Ulf Hansson]

On Thu, 10 Sep 2020 at 12:54, Andrew Jeffery <andrew at aj.id.au> wrote:
>
> Add properties to control the phase delay for input and output data
> sampling.
>
> Signed-off-by: Andrew Jeffery <andrew at aj.id.au>
> ---
>  Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml | 8 ++++++++
>  1 file changed, 8 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml b/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml
> index 987b287f3bff..75effd411554 100644
> --- a/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml
> +++ b/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml
> @@ -61,6 +61,14 @@ patternProperties:
>        sdhci,auto-cmd12:
>          type: boolean
>          description: Specifies that controller should use auto CMD12
> +      "aspeed,input-phase":
> +        $ref: '/schemas/types.yaml#/definitions/uint32'
> +        description:
> +          The input clock phase delay value.
> +      "aspeed,output-phase":
> +        $ref: '/schemas/types.yaml#/definitions/uint32'
> +        description:
> +          The output clock phase delay value.

We already have a common mmc clk-phase* binding, see
mmc-controller.yaml. As matter of fact, there is one binding per speed
mode.

Could that work for this case as well?

Kind regards
Uffe