[PATCH v2 1/3] pinctrl: mvebu: Fix i2c sda definition for 98DX3236

[Linus Walleij]

On Mon, Sep 7, 2020 at 11:17 PM Chris Packham
<chris.packham at alliedtelesis.co.nz> wrote:

> Per the datasheet the i2c functions use MPP_Sel=0x1. They are documented
> as using MPP_Sel=0x4 as well but mixing 0x1 and 0x4 is clearly wrong. On
> the board tested 0x4 resulted in a non-functioning i2c bus so stick with
> 0x1 which works.
>
> Fixes: d7ae8f8dee7f ("pinctrl: mvebu: pinctrl driver for 98DX3236 SoC")
> Signed-off-by: Chris Packham <chris.packham at alliedtelesis.co.nz>
> Reviewed-by: Andrew Lunn <andrew at lunn.ch>

This patch 1/3 applied for pin control fixes.

Patches 2 & 3 should go via the SoC tree.

Yours,
Linus Walleij