[PATCH 2/3] dt-bindings: remoteproc: stm32_rproc: update for firmware synchronization

[Rob Herring]

On Thu, Aug 27, 2020 at 09:21:00AM +0200, Arnaud Pouliquen wrote:
> Add new properties description used to attach to a pre-loaded
> firmware according to the commit 9276536f455b3
> ("remoteproc: stm32: Parse syscon that will manage M4 synchronisation")
> which updates the driver part.
> 
> Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen at st.com>
> ---
>  .../bindings/remoteproc/st,stm32-rproc.yaml   | 19 +++++++++++++++++++
>  1 file changed, 19 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
> index 4ffa25268fcc..e50957d86b1c 100644
> --- a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
> +++ b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
> @@ -96,6 +96,25 @@ properties:
>          3rd cell: register bitmask for the deep sleep bit
>      maxItems: 1
>  
> +  st,syscfg-m4-state:
> +    $ref: "/schemas/types.yaml#/definitions/phandle-array"
> +    description: |
> +      Reference to the tamp register which exposes the Cortex-M4 state.
> +        1st cell: phandle to syscon block
> +        2nd cell: register offset containing the Cortex-M4 state
> +        3rd cell: register bitmask for the Cortex-M4 state
> +    maxItems: 1
> +
> +  st,syscfg-rsc-tbl:
> +    $ref: "/schemas/types.yaml#/definitions/phandle-array"
> +    description: |
> +      Reference to the tamp register which references the Cortex-M4
> +      resource table address.
> +        1st cell: phandle to syscon block
> +        2nd cell: register offset containing the resource table address
> +        3rd cell: register bitmask for the resource table address
> +    maxItems: 1

Why can't these be implied? You can lookup the tamp syscon by 
compatible.

Please add these to the example.

> +
>    st,auto-boot:
>      $ref: /schemas/types.yaml#/definitions/flag
>      description:
> -- 
> 2.17.1
>