[PATCH v4 0/4] TI K3 R5F remoteproc support

[Suman Anna]

Hi All,

The following is v4 of the TI K3 R5F remoteproc driver series supporting all
the R5F processor clusters/subsystems on TI AM65x and J721E SoCs. Please
see the v1 cover-letter [1] for the features supported on these R5F processors.

This series is a rebased version on top of the latest v5.9-rc baseline and
includes very minor fixes w.r.t v3. The previous K3 DSP dependencies are now
available in mainline kernel. Please see the individual patches for the delta
differences (Only patches 1 and 2 updated).

Bjorn,
This series is only waiting on bindings ack and the conclusion on the bindings
discussion from v2 [4] on which I haven't seen any forward progress on this 
despite all the clarifications. I do not expect any changes even w.r.t System DT,
and we can't really have a common binding between TI and Xilinx R5Fs. How can we
take this series forward? It is blocking us to get the various usecases that
leverage the remoteprocs upstream.

regards
Suman

[1] R5F v1: https://patchwork.kernel.org/cover/11456367/
[2] R5F v2: https://patchwork.kernel.org/cover/11632993/
[3] R5F v3: https://patchwork.kernel.org/cover/11679327/
[4] https://patchwork.kernel.org/patch/11632997/

Suman Anna (4):
  dt-bindings: remoteproc: Add bindings for R5F subsystem on TI K3 SoCs
  remoteproc: k3-r5: Add a remoteproc driver for R5F subsystem
  remoteproc: k3-r5: Initialize TCM memories for ECC
  remoteproc: k3-r5: Add loading support for on-chip SRAM regions

 .../bindings/remoteproc/ti,k3-r5f-rproc.yaml  |  281 ++++
 drivers/remoteproc/Kconfig                    |   13 +
 drivers/remoteproc/Makefile                   |    1 +
 drivers/remoteproc/ti_k3_r5_remoteproc.c      | 1395 +++++++++++++++++
 4 files changed, 1690 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml
 create mode 100644 drivers/remoteproc/ti_k3_r5_remoteproc.c

-- 
2.28.0