[PATCH 3/7] drivers: hwmon: Add the iEi WT61P803 PUZZLE HWMON driver
Guenter Roeck
linux at roeck-us.net
Sat Sep 5 11:24:47 EDT 2020
On 9/5/20 6:03 AM, Luka Kovacic wrote:
> Add the iEi WT61P803 PUZZLE HWMON driver, that handles the fan speed
> control via PWM, reading fan speed and reading on-board temperature
> sensors.
>
> The driver registers a HWMON device and a simple thermal cooling device to
> enable in-kernel fan management.
>
> This driver depends on the iEi WT61P803 PUZZLE MFD driver.
>
> Signed-off-by: Luka Kovacic <luka.kovacic at sartura.hr>
> Cc: Luka Perkov <luka.perkov at sartura.hr>
New hwmon drivers should use the [devm_]hwmon_device_register_with_info() API.
Guenter
> ---
> drivers/hwmon/Kconfig | 8 +
> drivers/hwmon/Makefile | 1 +
> drivers/hwmon/iei-wt61p803-puzzle-hwmon.c | 613 ++++++++++++++++++++++
> 3 files changed, 622 insertions(+)
> create mode 100644 drivers/hwmon/iei-wt61p803-puzzle-hwmon.c
>
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index 8dc28b26916e..ff279df9bf40 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -722,6 +722,14 @@ config SENSORS_IBMPOWERNV
> This driver can also be built as a module. If so, the module
> will be called ibmpowernv.
>
> +config SENSORS_IEI_WT61P803_PUZZLE_HWMON
> + tristate "iEi WT61P803 PUZZLE MFD HWMON Driver"
> + depends on MFD_IEI_WT61P803_PUZZLE
> + help
> + The iEi WT61P803 PUZZLE MFD HWMON Driver handles reading fan speed
> + and writing fan PWM values. It also supports reading on-board
> + temperature sensors.
> +
> config SENSORS_IIO_HWMON
> tristate "Hwmon driver that uses channels specified via iio maps"
> depends on IIO
> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
> index a8f4b35b136b..b0afb2d6896f 100644
> --- a/drivers/hwmon/Makefile
> +++ b/drivers/hwmon/Makefile
> @@ -83,6 +83,7 @@ obj-$(CONFIG_SENSORS_HIH6130) += hih6130.o
> obj-$(CONFIG_SENSORS_ULTRA45) += ultra45_env.o
> obj-$(CONFIG_SENSORS_I5500) += i5500_temp.o
> obj-$(CONFIG_SENSORS_I5K_AMB) += i5k_amb.o
> +obj-$(CONFIG_SENSORS_IEI_WT61P803_PUZZLE_HWMON) += iei-wt61p803-puzzle-hwmon.o
> obj-$(CONFIG_SENSORS_IBMAEM) += ibmaem.o
> obj-$(CONFIG_SENSORS_IBMPEX) += ibmpex.o
> obj-$(CONFIG_SENSORS_IBMPOWERNV)+= ibmpowernv.o
> diff --git a/drivers/hwmon/iei-wt61p803-puzzle-hwmon.c b/drivers/hwmon/iei-wt61p803-puzzle-hwmon.c
> new file mode 100644
> index 000000000000..ca26d0cc6884
> --- /dev/null
> +++ b/drivers/hwmon/iei-wt61p803-puzzle-hwmon.c
> @@ -0,0 +1,613 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +
> +/* iEi WT61P803 PUZZLE MCU HWMON Driver
> + *
> + * Copyright (C) 2020 Sartura Ltd.
> + * Author: Luka Kovacic <luka.kovacic at sartura.hr>
> + */
> +
> +#include <linux/irq.h>
> +#include <linux/interrupt.h>
> +#include <linux/mfd/iei-wt61p803-puzzle.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +#include <linux/math64.h>
> +#include <linux/err.h>
> +
> +#include <linux/hwmon.h>
> +#include <linux/hwmon-sysfs.h>
> +#include <linux/thermal.h>
> +
> +#define IEI_WT61P803_PUZZLE_HWMON_MAX_TEMP_NUM 2
> +#define IEI_WT61P803_PUZZLE_HWMON_MAX_FAN_NUM 5
> +#define IEI_WT61P803_PUZZLE_HWMON_MAX_PWM_NUM 2
> +#define IEI_WT61P803_PUZZLE_HWMON_MAX_PWM_VAL 255
> +
> +/**
> + * struct iei_wt61p803_puzzle_thermal_cooling_device - Thermal cooling device instance
> + *
> + * @mcu_hwmon: MCU HWMON struct pointer
> + * @tcdev: Thermal cooling device pointer
> + * @name: Thermal cooling device name
> + * @pwm_channel: PWM channel (0 or 1)
> + * @cooling_levels: Thermal cooling device cooling levels
> + */
> +struct iei_wt61p803_puzzle_thermal_cooling_device {
> + struct iei_wt61p803_puzzle_hwmon *mcu_hwmon;
> + struct thermal_cooling_device *tcdev;
> + char name[THERMAL_NAME_LENGTH];
> + int pwm_channel;
> + u8 *cooling_levels;
> +};
> +
> +/**
> + * struct iei_wt61p803_puzzle_hwmon - MCU HWMON Driver
> + *
> + * @mcu: MCU struct pointer
> + * @temp_lock: Mutex for temp_sensor_val
> + * @temp_sensor_val: Temperature sensor values
> + * @fan_lock: Mutex for fan_speed_val
> + * @fan_speed_val: FAN speed (RPM) values
> + * @pwm_lock: Mutex for pwm_val
> + * @pwm_val: PWM values (0-255)
> + * @thermal_cooling_dev_lock: Mutex for Thermal Framework related members
> + * @thermal_cooling_dev_present: Per-channel thermal cooling device control
> + * @cdev: Per-channel thermal cooling device private structure
> + */
> +struct iei_wt61p803_puzzle_hwmon {
> + struct iei_wt61p803_puzzle *mcu;
> +
> + struct mutex temp_lock;
> + int temp_sensor_val[IEI_WT61P803_PUZZLE_HWMON_MAX_TEMP_NUM];
> +
> + struct mutex fan_lock;
> + int fan_speed_val[IEI_WT61P803_PUZZLE_HWMON_MAX_FAN_NUM];
> +
> + struct mutex pwm_lock;
> + int pwm_val[IEI_WT61P803_PUZZLE_HWMON_MAX_PWM_NUM];
> +
> + struct mutex thermal_cooling_dev_lock;
> + bool thermal_cooling_dev_present[IEI_WT61P803_PUZZLE_HWMON_MAX_PWM_NUM];
> + struct iei_wt61p803_puzzle_thermal_cooling_device
> + *cdev[IEI_WT61P803_PUZZLE_HWMON_MAX_PWM_NUM];
> +};
> +
> +/*
> + * Generic MCU access functions
> + *
> + * Description: The functions below are used as generic translation functions
> + * between the kernel and the MCU hardware. These can be used from HWMON or
> + * from the Thermal Framework.
> + */
> +
> +#define raw_temp_to_milidegree_celsius(x) ((int)((x - 0x80)*1000))
> +static int iei_wt61p803_puzzle_read_temp_sensor
> +(struct iei_wt61p803_puzzle_hwmon *mcu_hwmon, int channel, int *value)
> +{
> + int ret;
> + size_t reply_size = 0;
> + unsigned char *resp_buf;
> +
> + /* MCU Command: Retrieve all available NTC values */
> + unsigned char temp_sensor_ntc_cmd[4] = { '@', 'T', 'A' };
> +
> + if (channel > 1 && channel < 0)
> + return -EINVAL;
> +
> + resp_buf = kmalloc(IEI_WT61P803_PUZZLE_BUF_SIZE, GFP_KERNEL);
> + if (!resp_buf)
> + return -ENOMEM;
> +
> + /* Write the command to the MCU */
> + ret = iei_wt61p803_puzzle_write_command(mcu_hwmon->mcu,
> + temp_sensor_ntc_cmd, sizeof(temp_sensor_ntc_cmd),
> + resp_buf, &reply_size);
> + if (!ret) {
> + /* Check the number of NTC values (should be 0x32/'2') */
> + if (resp_buf[3] == 0x32) {
> + mutex_lock(&mcu_hwmon->temp_lock);
> +
> + /* Write values to the struct */
> + mcu_hwmon->temp_sensor_val[0] =
> + raw_temp_to_milidegree_celsius(resp_buf[4]);
> + mcu_hwmon->temp_sensor_val[1] =
> + raw_temp_to_milidegree_celsius(resp_buf[5]);
> +
> + mutex_unlock(&mcu_hwmon->temp_lock);
> + }
> +
> + }
> +
> + kfree(resp_buf);
> +
> + mutex_lock(&mcu_hwmon->temp_lock);
> + *value = mcu_hwmon->temp_sensor_val[channel];
> + mutex_unlock(&mcu_hwmon->temp_lock);
> +
> + return ret;
> +}
> +
> +#define raw_fan_val_to_rpm(x, y) ((int)(((x)<<8|(y))/2)*60)
> +static int iei_wt61p803_puzzle_read_fan_speed
> +(struct iei_wt61p803_puzzle_hwmon *mcu_hwmon, int channel, int *value)
> +{
> + int ret;
> + size_t reply_size = 0;
> + unsigned char *resp_buf;
> +
> + /* MCU Command: Retrieve fan speed value */
> + unsigned char fan_speed_cmd[4] = { '@', 'F', 'A' };
> +
> + resp_buf = kmalloc(IEI_WT61P803_PUZZLE_BUF_SIZE, GFP_KERNEL);
> + if (!resp_buf)
> + return -ENOMEM;
> +
> + switch (channel) {
> + case 0:
> + fan_speed_cmd[2] = 'A';
> + break;
> + case 1:
> + fan_speed_cmd[2] = 'B';
> + break;
> + case 2:
> + fan_speed_cmd[2] = 'C';
> + break;
> + case 3:
> + fan_speed_cmd[2] = 'D';
> + break;
> + case 4:
> + fan_speed_cmd[2] = 'E';
> + break;
> + default:
> + kfree(resp_buf);
> + return -EINVAL;
> + }
> +
> + /* Write the command to the MCU */
> + ret = iei_wt61p803_puzzle_write_command(mcu_hwmon->mcu, fan_speed_cmd,
> + sizeof(fan_speed_cmd), resp_buf, &reply_size);
> + if (!ret) {
> + mutex_lock(&mcu_hwmon->fan_lock);
> +
> + /* Calculate fan RPM */
> + mcu_hwmon->fan_speed_val[channel] = raw_fan_val_to_rpm(resp_buf[3],
> + resp_buf[4]);
> +
> + mutex_unlock(&mcu_hwmon->fan_lock);
> + }
> +
> + kfree(resp_buf);
> +
> + mutex_lock(&mcu_hwmon->fan_lock);
> + *value = mcu_hwmon->fan_speed_val[channel];
> + mutex_unlock(&mcu_hwmon->fan_lock);
> +
> + return 0;
> +}
> +
> +static int iei_wt61p803_puzzle_write_pwm_channel
> +(struct iei_wt61p803_puzzle_hwmon *mcu_hwmon, int channel, long pwm_set_val)
> +{
> + int ret;
> + size_t reply_size = 0;
> + unsigned char *resp_buf;
> +
> + /* MCU Command: Set PWM value (Default channel is 0/0x30 at index 3) */
> + unsigned char pwm_set_cmd[6] = { '@', 'F', 'W', 0x30, 0x00 };
> +
> + resp_buf = kmalloc(IEI_WT61P803_PUZZLE_BUF_SIZE, GFP_KERNEL);
> + if (!resp_buf)
> + return -ENOMEM;
> +
> + /* Determine the PWM channel */
> + switch (channel) {
> + case 0:
> + pwm_set_cmd[3] = 0x30;
> + break;
> + case 1:
> + pwm_set_cmd[3] = 0x31;
> + break;
> + default:
> + kfree(resp_buf);
> + return -EINVAL;
> + }
> +
> + if (pwm_set_val < 0 || pwm_set_val > IEI_WT61P803_PUZZLE_HWMON_MAX_PWM_VAL) {
> + kfree(resp_buf);
> + return -EINVAL;
> + }
> +
> + /* Add the value to the command */
> + pwm_set_cmd[4] = (char)pwm_set_val;
> +
> + /* Write the command to the MCU */
> + ret = iei_wt61p803_puzzle_write_command(mcu_hwmon->mcu, pwm_set_cmd,
> + sizeof(pwm_set_cmd), resp_buf, &reply_size);
> + if (!ret) {
> + /* Store the PWM value */
> + if (resp_buf[0] == '@' && resp_buf[1] == 0x30) {
> + mutex_lock(&mcu_hwmon->pwm_lock);
> + mcu_hwmon->pwm_val[channel] = (int)pwm_set_val;
> + mutex_unlock(&mcu_hwmon->pwm_lock);
> + }
> + }
> +
> + kfree(resp_buf);
> + return 0;
> +}
> +
> +static int iei_wt61p803_puzzle_read_pwm_channel
> +(struct iei_wt61p803_puzzle_hwmon *mcu_hwmon, int channel, int *value)
> +{
> + int ret;
> + size_t reply_size = 0;
> + unsigned char *resp_buf;
> +
> + /* MCU Command: Retrieve PWM value (Default channel: 0x30 at idx 3) */
> + unsigned char pwm_get_cmd[5] = { '@', 'F', 'Z', 0x30 };
> +
> + resp_buf = kmalloc(IEI_WT61P803_PUZZLE_BUF_SIZE, GFP_KERNEL);
> + if (!resp_buf)
> + return -ENOMEM;
> +
> + /* Determine the PWM channel */
> + switch (channel) {
> + case 0:
> + pwm_get_cmd[3] = 0x30;
> + break;
> + case 1:
> + pwm_get_cmd[3] = 0x31;
> + break;
> + default:
> + kfree(resp_buf);
> + return -EINVAL;
> + }
> +
> + /* Write the command to the MCU */
> + ret = iei_wt61p803_puzzle_write_command(mcu_hwmon->mcu, pwm_get_cmd,
> + sizeof(pwm_get_cmd), resp_buf, &reply_size);
> + if (!ret) {
> + /* Store the PWM value */
> + if (resp_buf[2] == 'Z') {
> + mutex_lock(&mcu_hwmon->pwm_lock);
> + mcu_hwmon->pwm_val[channel] = (int)resp_buf[3];
> + mutex_unlock(&mcu_hwmon->pwm_lock);
> + }
> + }
> +
> + kfree(resp_buf);
> +
> + mutex_lock(&mcu_hwmon->pwm_lock);
> + *value = mcu_hwmon->pwm_val[channel];
> + mutex_unlock(&mcu_hwmon->pwm_lock);
> +
> + return 0;
> +}
> +
> +/*
> + * HWMON attributes
> + *
> + * Description: The attributes below are registered with the HWMON subsystem.
> + * Fans can only be controlled, if they are not controlled by the Thermal
> + * Framework.
> + */
> +
> +static ssize_t temp_input_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct iei_wt61p803_puzzle_hwmon *mcu_hwmon =
> + dev_get_drvdata(dev->parent);
> + struct sensor_device_attribute *sensor_dev_attr =
> + to_sensor_dev_attr(attr);
> + int nr = sensor_dev_attr->index;
> +
> + int ret, value;
> +
> + ret = iei_wt61p803_puzzle_read_temp_sensor(mcu_hwmon, nr, &value);
> + if (ret)
> + return ret;
> +
> + return sprintf(buf, "%d\n", value);
> +}
> +
> +static SENSOR_DEVICE_ATTR_RO(temp1_input, temp_input, 0);
> +static SENSOR_DEVICE_ATTR_RO(temp2_input, temp_input, 1);
> +
> +static ssize_t fan_input_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct iei_wt61p803_puzzle_hwmon *mcu_hwmon =
> + dev_get_drvdata(dev->parent);
> + struct sensor_device_attribute *sensor_dev_attr =
> + to_sensor_dev_attr(attr);
> + int nr = sensor_dev_attr->index;
> +
> + int ret, value;
> +
> + ret = iei_wt61p803_puzzle_read_fan_speed(mcu_hwmon, nr, &value);
> + if (ret)
> + return ret;
> +
> + return sprintf(buf, "%d\n", value);
> +}
> +
> +static SENSOR_DEVICE_ATTR_RO(fan1_input, fan_input, 0);
> +static SENSOR_DEVICE_ATTR_RO(fan2_input, fan_input, 1);
> +static SENSOR_DEVICE_ATTR_RO(fan3_input, fan_input, 2);
> +static SENSOR_DEVICE_ATTR_RO(fan4_input, fan_input, 3);
> +static SENSOR_DEVICE_ATTR_RO(fan5_input, fan_input, 4);
> +
> +static ssize_t pwm_store(struct device *dev, struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct iei_wt61p803_puzzle_hwmon *mcu_hwmon =
> + dev_get_drvdata(dev->parent);
> + struct sensor_device_attribute *sensor_dev_attr =
> + to_sensor_dev_attr(attr);
> + int nr = sensor_dev_attr->index;
> +
> + int ret;
> + long pwm_value;
> +
> + if (mcu_hwmon->thermal_cooling_dev_present[nr]) {
> + /*
> + * The Thermal Framework has already claimed this specific PWM
> + * channel. Return 0, to indicate 0 bytes written.
> + */
> +
> + return 0;
> + }
> +
> + /* Convert the string to a long */
> + ret = kstrtol(buf, 10, &pwm_value);
> + if (ret)
> + return ret;
> +
> + ret = iei_wt61p803_puzzle_write_pwm_channel(mcu_hwmon, nr, pwm_value);
> + if (ret)
> + return ret;
> +
> + return count;
> +}
> +
> +static ssize_t pwm_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct iei_wt61p803_puzzle_hwmon *mcu_hwmon =
> + dev_get_drvdata(dev->parent);
> + struct sensor_device_attribute *sensor_dev_attr =
> + to_sensor_dev_attr(attr);
> + int nr = sensor_dev_attr->index;
> +
> + int ret, value;
> +
> + ret = iei_wt61p803_puzzle_read_pwm_channel(mcu_hwmon, nr, &value);
> + if (ret)
> + return ret;
> +
> + return sprintf(buf, "%d\n", value);
> +}
> +
> +static SENSOR_DEVICE_ATTR_RW(pwm1, pwm, 0);
> +static SENSOR_DEVICE_ATTR_RW(pwm2, pwm, 1);
> +
> +static struct attribute *iei_wt61p803_puzzle_attributes_temp[] = {
> + &sensor_dev_attr_temp1_input.dev_attr.attr,
> + &sensor_dev_attr_temp2_input.dev_attr.attr,
> + NULL
> +};
> +
> +static struct attribute *iei_wt61p803_puzzle_attributes_fan[] = {
> + &sensor_dev_attr_fan1_input.dev_attr.attr,
> + &sensor_dev_attr_fan2_input.dev_attr.attr,
> + &sensor_dev_attr_fan3_input.dev_attr.attr,
> + &sensor_dev_attr_fan4_input.dev_attr.attr,
> + &sensor_dev_attr_fan5_input.dev_attr.attr,
> + NULL
> +};
> +
> +static struct attribute *iei_wt61p803_puzzle_attributes_pwm[] = {
> + &sensor_dev_attr_pwm1.dev_attr.attr,
> + &sensor_dev_attr_pwm2.dev_attr.attr,
> + NULL
> +};
> +
> +static const struct attribute_group iei_wt61p803_puzzle_group_temp = {
> + .attrs = iei_wt61p803_puzzle_attributes_temp
> +};
> +
> +static const struct attribute_group iei_wt61p803_puzzle_group_fan = {
> + .attrs = iei_wt61p803_puzzle_attributes_fan
> +};
> +
> +static const struct attribute_group iei_wt61p803_puzzle_group_pwm = {
> + .attrs = iei_wt61p803_puzzle_attributes_pwm
> +};
> +
> +static const struct attribute_group *iei_wt61p803_puzzle_attr_groups[] = {
> + &iei_wt61p803_puzzle_group_temp,
> + &iei_wt61p803_puzzle_group_fan,
> + &iei_wt61p803_puzzle_group_pwm,
> + NULL
> +};
> +
> +/*
> + * Thermal cooling device
> + *
> + * Description: The functions below are thermal cooling device ops, registered
> + * with the Thermal Framework.
> + */
> +
> +static int iei_wt61p803_puzzle_get_max_state
> +(struct thermal_cooling_device *tcdev, unsigned long *state)
> +{
> + *state = IEI_WT61P803_PUZZLE_HWMON_MAX_PWM_VAL;
> +
> + return 0;
> +}
> +
> +static int iei_wt61p803_puzzle_get_cur_state
> +(struct thermal_cooling_device *tcdev, unsigned long *state)
> +{
> + struct iei_wt61p803_puzzle_thermal_cooling_device *cdev = tcdev->devdata;
> + struct iei_wt61p803_puzzle_hwmon *mcu_hwmon = cdev->mcu_hwmon;
> +
> + int ret, value;
> +
> + if (!mcu_hwmon)
> + return -EINVAL;
> +
> + ret = iei_wt61p803_puzzle_read_pwm_channel(mcu_hwmon,
> + cdev->pwm_channel, &value);
> + if (ret)
> + return ret;
> +
> + *state = (unsigned long)value;
> +
> + return 0;
> +}
> +
> +static int iei_wt61p803_puzzle_set_cur_state
> +(struct thermal_cooling_device *tcdev, unsigned long state)
> +{
> + struct iei_wt61p803_puzzle_thermal_cooling_device *cdev = tcdev->devdata;
> + struct iei_wt61p803_puzzle_hwmon *mcu_hwmon = cdev->mcu_hwmon;
> +
> + if (!mcu_hwmon)
> + return -EINVAL;
> +
> + return iei_wt61p803_puzzle_write_pwm_channel(mcu_hwmon,
> + cdev->pwm_channel, state);
> +}
> +
> +static const struct thermal_cooling_device_ops iei_wt61p803_puzzle_cooling_ops = {
> + .get_max_state = iei_wt61p803_puzzle_get_max_state,
> + .get_cur_state = iei_wt61p803_puzzle_get_cur_state,
> + .set_cur_state = iei_wt61p803_puzzle_set_cur_state,
> +};
> +
> +/*
> + * Driver setup
> + */
> +
> +static int iei_wt61p803_puzzle_enable_thermal_cooling_dev
> +(struct device *dev, struct device_node *child, struct iei_wt61p803_puzzle_hwmon *mcu_hwmon)
> +{
> + u32 pwm_channel;
> + int ret, num_levels;
> +
> + struct iei_wt61p803_puzzle_thermal_cooling_device *cdev;
> +
> + ret = of_property_read_u32(child, "reg", &pwm_channel);
> + if (ret)
> + return ret;
> +
> + mutex_lock(&mcu_hwmon->thermal_cooling_dev_lock);
> + mcu_hwmon->thermal_cooling_dev_present[pwm_channel] = true;
> + mutex_unlock(&mcu_hwmon->thermal_cooling_dev_lock);
> +
> + num_levels = of_property_count_u8_elems(child, "cooling-levels");
> + if (num_levels > 0) {
> + cdev = devm_kzalloc(dev, sizeof(*cdev), GFP_KERNEL);
> + if (!cdev)
> + return -ENOMEM;
> +
> + cdev->cooling_levels = devm_kzalloc(dev, num_levels, GFP_KERNEL);
> + if (!cdev->cooling_levels)
> + return -ENOMEM;
> +
> + ret = of_property_read_u8_array(child, "cooling-levels",
> + cdev->cooling_levels, num_levels);
> + if (ret) {
> + dev_err(dev, "Couldn't read property 'cooling-levels'");
> + return ret;
> + }
> +
> + snprintf(cdev->name, THERMAL_NAME_LENGTH, "iei_wt61p803_puzzle_%d", pwm_channel);
> +
> + cdev->tcdev = devm_thermal_of_cooling_device_register(dev, child,
> + cdev->name, cdev, &iei_wt61p803_puzzle_cooling_ops);
> + if (IS_ERR(cdev->tcdev))
> + return PTR_ERR(cdev->tcdev);
> +
> + cdev->mcu_hwmon = mcu_hwmon;
> + cdev->pwm_channel = pwm_channel;
> +
> + mutex_lock(&mcu_hwmon->thermal_cooling_dev_lock);
> + mcu_hwmon->cdev[pwm_channel] = cdev;
> + mutex_unlock(&mcu_hwmon->thermal_cooling_dev_lock);
> + }
> + return 0;
> +}
> +
> +static int iei_wt61p803_puzzle_hwmon_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct device_node *child;
> +
> + /* iEi WT61P803 PUZZLE HWMON priv struct */
> + struct iei_wt61p803_puzzle_hwmon *mcu_hwmon;
> +
> + /* iEi WT61P803 PUZZLE MCU Core driver */
> + struct iei_wt61p803_puzzle *mcu = dev_get_drvdata(dev->parent);
> +
> + struct device *hwmon_dev;
> +
> + int ret;
> +
> + mcu_hwmon = devm_kzalloc(dev, sizeof(*mcu_hwmon), GFP_KERNEL);
> + if (!mcu_hwmon)
> + return -ENOMEM;
> +
> + /* Set reference to the parent 'core' MFD driver */
> + mcu_hwmon->mcu = mcu;
> +
> + /* Initialize the mutex members */
> + mutex_init(&mcu_hwmon->temp_lock);
> + mutex_init(&mcu_hwmon->fan_lock);
> + mutex_init(&mcu_hwmon->pwm_lock);
> + mutex_init(&mcu_hwmon->thermal_cooling_dev_lock);
> +
> + platform_set_drvdata(pdev, mcu_hwmon);
> +
> + hwmon_dev = devm_hwmon_device_register_with_groups(dev,
> + "iei_wt61p803_puzzle",
> + mcu_hwmon,
> + iei_wt61p803_puzzle_attr_groups);
> +
> + /* Control fans via PWM lines via Linux Kernel */
> + if (IS_ENABLED(CONFIG_THERMAL)) {
> + for_each_child_of_node(dev->of_node, child) {
> + ret = iei_wt61p803_puzzle_enable_thermal_cooling_dev(dev, child, mcu_hwmon);
> + if (ret) {
> + dev_err(dev, "Enabling the PWM fan failed\n");
> + of_node_put(child);
> + return ret;
> + }
> + }
> + }
> +
> + return 0;
> +}
> +
> +static const struct of_device_id iei_wt61p803_puzzle_hwmon_id_table[] = {
> + { .compatible = "iei,wt61p803-puzzle-hwmon" },
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, iei_wt61p803_puzzle_hwmon_id_table);
> +
> +static struct platform_driver iei_wt61p803_puzzle_hwmon_driver = {
> + .driver = {
> + .name = "iei-wt61p803-puzzle-hwmon",
> + .of_match_table = iei_wt61p803_puzzle_hwmon_id_table,
> + },
> + .probe = iei_wt61p803_puzzle_hwmon_probe,
> +};
> +
> +module_platform_driver(iei_wt61p803_puzzle_hwmon_driver);
> +
> +MODULE_DESCRIPTION("iEi WT61P803 PUZZLE MCU HWMON Driver");
> +MODULE_AUTHOR("Luka Kovacic <luka.kovacic at sartura.hr>");
> +MODULE_LICENSE("GPL");
>
More information about the linux-arm-kernel
mailing list