[PATCH 2/4] arm64: dts: ti: k3-j7200-main: add main navss cpts node

Grygorii Strashko grygorii.strashko at ti.com
Fri Sep 4 19:38:28 EDT 2020


Add DT node for Main NAVSS CPTS module.

Signed-off-by: Grygorii Strashko <grygorii.strashko at ti.com>
---
 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
index cc4ff380a7bc..822c062e25c8 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
@@ -117,6 +117,18 @@
 						<0x0c>; /* RX_UHCHAN */
 			ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */
 		};
+
+		cpts at 310d0000 {
+			compatible = "ti,j721e-cpts";
+			reg = <0x0 0x310d0000 0x0 0x400>;
+			reg-names = "cpts";
+			clocks = <&k3_clks 201 1>;
+			clock-names = "cpts";
+			interrupts-extended = <&main_navss_intr 391>;
+			interrupt-names = "cpts";
+			ti,cpts-periodic-outputs = <6>;
+			ti,cpts-ext-ts-inputs = <8>;
+		};
 	};
 
 	main_pmx0: pinmux at 11c000 {
-- 
2.17.1




More information about the linux-arm-kernel mailing list