[PATCH v5 56/80] drm/vc4: hdmi: Add a set_timings callback
Dave Stevenson
dave.stevenson at raspberrypi.com
Fri Sep 4 11:46:53 EDT 2020
Hi Maxime
On Thu, 3 Sep 2020 at 09:03, Maxime Ripard <maxime at cerno.tech> wrote:
>
> Similarly to the previous patches, the timings setup in the HDMI controller
> of the BCM2711 is slightly different, mostly because it supports higher
> resolutions and thus needed more spaces for the various timings, resulting
> in the register layout changing.
>
> Let's add a callback for that as well.
>
> Tested-by: Chanwoo Choi <cw00.choi at samsung.com>
> Tested-by: Hoegeun Kwon <hoegeun.kwon at samsung.com>
> Tested-by: Stefan Wahren <stefan.wahren at i2se.com>
> Signed-off-by: Maxime Ripard <maxime at cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson at raspberrypi.com>
> ---
> drivers/gpu/drm/vc4/vc4_hdmi.c | 72 +++++++++++++++++++----------------
> drivers/gpu/drm/vc4/vc4_hdmi.h | 4 ++-
> 2 files changed, 44 insertions(+), 32 deletions(-)
>
> diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
> index 532618e02399..9e2bc6cb690e 100644
> --- a/drivers/gpu/drm/vc4/vc4_hdmi.c
> +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
> @@ -369,12 +369,9 @@ static void vc4_hdmi_csc_setup(struct vc4_hdmi *vc4_hdmi, bool enable)
> HDMI_WRITE(HDMI_CSC_CTL, csc_ctl);
> }
>
> -static void vc4_hdmi_encoder_enable(struct drm_encoder *encoder)
> +static void vc4_hdmi_set_timings(struct vc4_hdmi *vc4_hdmi,
> + struct drm_display_mode *mode)
> {
> - struct drm_display_mode *mode = &encoder->crtc->state->adjusted_mode;
> - struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder);
> - struct vc4_hdmi_encoder *vc4_encoder = &vc4_hdmi->encoder;
> - bool debug_dump_regs = false;
> bool hsync_pos = mode->flags & DRM_MODE_FLAG_PHSYNC;
> bool vsync_pos = mode->flags & DRM_MODE_FLAG_PVSYNC;
> bool interlaced = mode->flags & DRM_MODE_FLAG_INTERLACE;
> @@ -392,6 +389,41 @@ static void vc4_hdmi_encoder_enable(struct drm_encoder *encoder)
> mode->crtc_vsync_end -
> interlaced,
> VC4_HDMI_VERTB_VBP));
> +
> + HDMI_WRITE(HDMI_HORZA,
> + (vsync_pos ? VC4_HDMI_HORZA_VPOS : 0) |
> + (hsync_pos ? VC4_HDMI_HORZA_HPOS : 0) |
> + VC4_SET_FIELD(mode->hdisplay * pixel_rep,
> + VC4_HDMI_HORZA_HAP));
> +
> + HDMI_WRITE(HDMI_HORZB,
> + VC4_SET_FIELD((mode->htotal -
> + mode->hsync_end) * pixel_rep,
> + VC4_HDMI_HORZB_HBP) |
> + VC4_SET_FIELD((mode->hsync_end -
> + mode->hsync_start) * pixel_rep,
> + VC4_HDMI_HORZB_HSP) |
> + VC4_SET_FIELD((mode->hsync_start -
> + mode->hdisplay) * pixel_rep,
> + VC4_HDMI_HORZB_HFP));
> +
> + HDMI_WRITE(HDMI_VERTA0, verta);
> + HDMI_WRITE(HDMI_VERTA1, verta);
> +
> + HDMI_WRITE(HDMI_VERTB0, vertb_even);
> + HDMI_WRITE(HDMI_VERTB1, vertb);
> +
> + HDMI_WRITE(HDMI_VID_CTL,
> + (vsync_pos ? 0 : VC4_HD_VID_CTL_VSYNC_LOW) |
> + (hsync_pos ? 0 : VC4_HD_VID_CTL_HSYNC_LOW));
> +}
> +
> +static void vc4_hdmi_encoder_enable(struct drm_encoder *encoder)
> +{
> + struct drm_display_mode *mode = &encoder->crtc->state->adjusted_mode;
> + struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder);
> + struct vc4_hdmi_encoder *vc4_encoder = to_vc4_hdmi_encoder(encoder);
> + bool debug_dump_regs = false;
> int ret;
>
> ret = pm_runtime_get_sync(&vc4_hdmi->pdev->dev);
> @@ -435,33 +467,8 @@ static void vc4_hdmi_encoder_enable(struct drm_encoder *encoder)
> VC4_HDMI_SCHEDULER_CONTROL_MANUAL_FORMAT |
> VC4_HDMI_SCHEDULER_CONTROL_IGNORE_VSYNC_PREDICTS);
>
> - HDMI_WRITE(HDMI_HORZA,
> - (vsync_pos ? VC4_HDMI_HORZA_VPOS : 0) |
> - (hsync_pos ? VC4_HDMI_HORZA_HPOS : 0) |
> - VC4_SET_FIELD(mode->hdisplay * pixel_rep,
> - VC4_HDMI_HORZA_HAP));
> -
> - HDMI_WRITE(HDMI_HORZB,
> - VC4_SET_FIELD((mode->htotal -
> - mode->hsync_end) * pixel_rep,
> - VC4_HDMI_HORZB_HBP) |
> - VC4_SET_FIELD((mode->hsync_end -
> - mode->hsync_start) * pixel_rep,
> - VC4_HDMI_HORZB_HSP) |
> - VC4_SET_FIELD((mode->hsync_start -
> - mode->hdisplay) * pixel_rep,
> - VC4_HDMI_HORZB_HFP));
> -
> - HDMI_WRITE(HDMI_VERTA0, verta);
> - HDMI_WRITE(HDMI_VERTA1, verta);
> -
> - HDMI_WRITE(HDMI_VERTB0, vertb_even);
> - HDMI_WRITE(HDMI_VERTB1, vertb);
> -
> - HDMI_WRITE(HDMI_VID_CTL,
> - (vsync_pos ? 0 : VC4_HD_VID_CTL_VSYNC_LOW) |
> - (hsync_pos ? 0 : VC4_HD_VID_CTL_HSYNC_LOW));
> -
> + if (vc4_hdmi->variant->set_timings)
> + vc4_hdmi->variant->set_timings(vc4_hdmi, mode);
>
> if (vc4_encoder->hdmi_monitor &&
> drm_default_rgb_quant_range(mode) == HDMI_QUANTIZATION_RANGE_LIMITED) {
> @@ -1445,6 +1452,7 @@ static const struct vc4_hdmi_variant bcm2835_variant = {
> .init_resources = vc4_hdmi_init_resources,
> .csc_setup = vc4_hdmi_csc_setup,
> .reset = vc4_hdmi_reset,
> + .set_timings = vc4_hdmi_set_timings,
> .phy_init = vc4_hdmi_phy_init,
> .phy_disable = vc4_hdmi_phy_disable,
> .phy_rng_enable = vc4_hdmi_phy_rng_enable,
> diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.h b/drivers/gpu/drm/vc4/vc4_hdmi.h
> index c8fd58548ea2..0c32dc46d289 100644
> --- a/drivers/gpu/drm/vc4/vc4_hdmi.h
> +++ b/drivers/gpu/drm/vc4/vc4_hdmi.h
> @@ -44,6 +44,10 @@ struct vc4_hdmi_variant {
> /* Callback to enable / disable the CSC */
> void (*csc_setup)(struct vc4_hdmi *vc4_hdmi, bool enable);
>
> + /* Callback to configure the video timings in the HDMI block */
> + void (*set_timings)(struct vc4_hdmi *vc4_hdmi,
> + struct drm_display_mode *mode);
> +
> /* Callback to initialize the PHY according to the mode */
> void (*phy_init)(struct vc4_hdmi *vc4_hdmi,
> struct drm_display_mode *mode);
> --
> git-series 0.9.1
More information about the linux-arm-kernel
mailing list