[PATCH 10/13] arm64: dts: imx8mq: Add missing interrupts to GPC

[Lucas Stach]

On Fr, 2020-09-04 at 16:53 +0200, Krzysztof Kozlowski wrote:
> The i.MX General Power Controller v2 device node was missing interrupts
> property necessary to route its interrupt to GIC.  This also fixes the
> dbts_check warnings like:
> 
>   arch/arm64/boot/dts/freescale/imx8mq-evk.dt.yaml: gpc at 303a0000:
>     {'compatible': ... '$nodename': ['gpc at 303a0000']} is not valid under any of the given schemas
>   arch/arm64/boot/dts/freescale/imx8mq-evk.dt.yaml: gpc at 303a0000: 'interrupts' is a required property
> 
> Fixes: fdbcc04da246 ("arm64: dts: imx8mq: add GPC power domains")
> Signed-off-by: Krzysztof Kozlowski <krzk at kernel.org>

Reviewed-by: Lucas Stach <l.stach at pengutronix.de>

> ---
>  arch/arm64/boot/dts/freescale/imx8mq.dtsi | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> index aad3b9f2f35c..5e0e7d0f1bc4 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> @@ -623,6 +623,7 @@
>  			gpc: gpc at 303a0000 {
>  				compatible = "fsl,imx8mq-gpc";
>  				reg = <0x303a0000 0x10000>;
> +				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
>  				interrupt-parent = <&gic>;
>  				interrupt-controller;
>  				#interrupt-cells = <3>;