[PATCH 5/5] ARM: imx: Remove ehci board files

Fabio Estevam festevam at gmail.com
Tue Sep 1 20:30:17 EDT 2020


Now that the i.MX board files have been removed, there
is no need for keeping the ehci related files, so just
remove them.

Signed-off-by: Fabio Estevam <festevam at gmail.com>
---
 arch/arm/mach-imx/Makefile     |  7 ++-
 arch/arm/mach-imx/ehci-imx27.c | 74 ----------------------------
 arch/arm/mach-imx/ehci-imx31.c | 74 ----------------------------
 arch/arm/mach-imx/ehci-imx35.c | 89 ----------------------------------
 arch/arm/mach-imx/ehci.h       | 44 -----------------
 5 files changed, 3 insertions(+), 285 deletions(-)
 delete mode 100644 arch/arm/mach-imx/ehci-imx27.c
 delete mode 100644 arch/arm/mach-imx/ehci-imx31.c
 delete mode 100644 arch/arm/mach-imx/ehci-imx35.c
 delete mode 100644 arch/arm/mach-imx/ehci.h

diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index d6607f3000d9..ca35d3e4cab4 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -3,11 +3,10 @@ obj-y := cpu.o system.o irq-common.o
 
 obj-$(CONFIG_SOC_IMX25) += cpu-imx25.o mach-imx25.o pm-imx25.o
 
-obj-$(CONFIG_SOC_IMX27) += cpu-imx27.o pm-imx27.o mach-imx27.o
-obj-$(CONFIG_SOC_IMX27) += mm-imx27.o ehci-imx27.o
+obj-$(CONFIG_SOC_IMX27) += cpu-imx27.o pm-imx27.o mach-imx27.o mm-imx27.o
 
-obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o iomux-imx31.o ehci-imx31.o mach-imx31.o
-obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o ehci-imx35.o mach-imx35.o
+obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o iomux-imx31.o mach-imx31.o
+obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o mach-imx35.o
 
 imx5-pm-$(CONFIG_PM) += pm-imx5.o
 obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o $(imx5-pm-y)
diff --git a/arch/arm/mach-imx/ehci-imx27.c b/arch/arm/mach-imx/ehci-imx27.c
deleted file mode 100644
index 83962ce75983..000000000000
--- a/arch/arm/mach-imx/ehci-imx27.c
+++ /dev/null
@@ -1,74 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (c) 2009 Daniel Mack <daniel at caiaq.de>
- * Copyright (C) 2010 Freescale Semiconductor, Inc.
- */
-
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/platform_data/usb-ehci-mxc.h>
-
-#include "ehci.h"
-#include "hardware.h"
-
-#define USBCTRL_OTGBASE_OFFSET	0x600
-
-#define MX27_OTG_SIC_SHIFT	29
-#define MX27_OTG_SIC_MASK	(0x3 << MX27_OTG_SIC_SHIFT)
-#define MX27_OTG_PM_BIT		(1 << 24)
-
-#define MX27_H2_SIC_SHIFT	21
-#define MX27_H2_SIC_MASK	(0x3 << MX27_H2_SIC_SHIFT)
-#define MX27_H2_PM_BIT		(1 << 16)
-#define MX27_H2_DT_BIT		(1 << 5)
-
-#define MX27_H1_SIC_SHIFT	13
-#define MX27_H1_SIC_MASK	(0x3 << MX27_H1_SIC_SHIFT)
-#define MX27_H1_PM_BIT		(1 << 8)
-#define MX27_H1_DT_BIT		(1 << 4)
-
-int mx27_initialize_usb_hw(int port, unsigned int flags)
-{
-	unsigned int v;
-
-	v = readl(MX27_IO_ADDRESS(MX27_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
-
-	switch (port) {
-	case 0:	/* OTG port */
-		v &= ~(MX27_OTG_SIC_MASK | MX27_OTG_PM_BIT);
-		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX27_OTG_SIC_SHIFT;
-
-		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
-			v |= MX27_OTG_PM_BIT;
-		break;
-	case 1: /* H1 port */
-		v &= ~(MX27_H1_SIC_MASK | MX27_H1_PM_BIT | MX27_H1_DT_BIT);
-		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX27_H1_SIC_SHIFT;
-
-		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
-			v |= MX27_H1_PM_BIT;
-
-		if (!(flags & MXC_EHCI_TTL_ENABLED))
-			v |= MX27_H1_DT_BIT;
-
-		break;
-	case 2:	/* H2 port */
-		v &= ~(MX27_H2_SIC_MASK | MX27_H2_PM_BIT | MX27_H2_DT_BIT);
-		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX27_H2_SIC_SHIFT;
-
-		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
-			v |= MX27_H2_PM_BIT;
-
-		if (!(flags & MXC_EHCI_TTL_ENABLED))
-			v |= MX27_H2_DT_BIT;
-
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	writel(v, MX27_IO_ADDRESS(MX27_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
-
-	return 0;
-}
-
diff --git a/arch/arm/mach-imx/ehci-imx31.c b/arch/arm/mach-imx/ehci-imx31.c
deleted file mode 100644
index d6d794d53a63..000000000000
--- a/arch/arm/mach-imx/ehci-imx31.c
+++ /dev/null
@@ -1,74 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (c) 2009 Daniel Mack <daniel at caiaq.de>
- * Copyright (C) 2010 Freescale Semiconductor, Inc.
- */
-
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/platform_data/usb-ehci-mxc.h>
-
-#include "ehci.h"
-#include "hardware.h"
-
-#define USBCTRL_OTGBASE_OFFSET	0x600
-
-#define MX31_OTG_SIC_SHIFT	29
-#define MX31_OTG_SIC_MASK	(0x3 << MX31_OTG_SIC_SHIFT)
-#define MX31_OTG_PM_BIT		(1 << 24)
-
-#define MX31_H2_SIC_SHIFT	21
-#define MX31_H2_SIC_MASK	(0x3 << MX31_H2_SIC_SHIFT)
-#define MX31_H2_PM_BIT		(1 << 16)
-#define MX31_H2_DT_BIT		(1 << 5)
-
-#define MX31_H1_SIC_SHIFT	13
-#define MX31_H1_SIC_MASK	(0x3 << MX31_H1_SIC_SHIFT)
-#define MX31_H1_PM_BIT		(1 << 8)
-#define MX31_H1_DT_BIT		(1 << 4)
-
-int mx31_initialize_usb_hw(int port, unsigned int flags)
-{
-	unsigned int v;
-
-	v = readl(MX31_IO_ADDRESS(MX31_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
-
-	switch (port) {
-	case 0:	/* OTG port */
-		v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT);
-		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_OTG_SIC_SHIFT;
-
-		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
-			v |= MX31_OTG_PM_BIT;
-
-		break;
-	case 1: /* H1 port */
-		v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT | MX31_H1_DT_BIT);
-		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_H1_SIC_SHIFT;
-
-		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
-			v |= MX31_H1_PM_BIT;
-
-		if (!(flags & MXC_EHCI_TTL_ENABLED))
-			v |= MX31_H1_DT_BIT;
-
-		break;
-	case 2:	/* H2 port */
-		v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT | MX31_H2_DT_BIT);
-		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_H2_SIC_SHIFT;
-
-		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
-			v |= MX31_H2_PM_BIT;
-
-		if (!(flags & MXC_EHCI_TTL_ENABLED))
-			v |= MX31_H2_DT_BIT;
-
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	writel(v, MX31_IO_ADDRESS(MX31_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
-
-	return 0;
-}
diff --git a/arch/arm/mach-imx/ehci-imx35.c b/arch/arm/mach-imx/ehci-imx35.c
deleted file mode 100644
index e6ba965c5c5b..000000000000
--- a/arch/arm/mach-imx/ehci-imx35.c
+++ /dev/null
@@ -1,89 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (c) 2009 Daniel Mack <daniel at caiaq.de>
- * Copyright (C) 2010 Freescale Semiconductor, Inc.
- */
-
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/platform_data/usb-ehci-mxc.h>
-
-#include "ehci.h"
-#include "hardware.h"
-
-#define USBCTRL_OTGBASE_OFFSET	0x600
-
-#define MX35_OTG_SIC_SHIFT	29
-#define MX35_OTG_SIC_MASK	(0x3 << MX35_OTG_SIC_SHIFT)
-#define MX35_OTG_PM_BIT		(1 << 24)
-#define MX35_OTG_PP_BIT		(1 << 11)
-#define MX35_OTG_OCPOL_BIT	(1 << 3)
-
-#define MX35_H1_SIC_SHIFT	21
-#define MX35_H1_SIC_MASK	(0x3 << MX35_H1_SIC_SHIFT)
-#define MX35_H1_PP_BIT		(1 << 18)
-#define MX35_H1_PM_BIT		(1 << 16)
-#define MX35_H1_IPPUE_UP_BIT	(1 << 7)
-#define MX35_H1_IPPUE_DOWN_BIT	(1 << 6)
-#define MX35_H1_TLL_BIT		(1 << 5)
-#define MX35_H1_USBTE_BIT	(1 << 4)
-#define MX35_H1_OCPOL_BIT	(1 << 2)
-
-int mx35_initialize_usb_hw(int port, unsigned int flags)
-{
-	unsigned int v;
-
-	v = readl(MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
-
-	switch (port) {
-	case 0:	/* OTG port */
-		v &= ~(MX35_OTG_SIC_MASK | MX35_OTG_PM_BIT | MX35_OTG_PP_BIT |
-			MX35_OTG_OCPOL_BIT);
-		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX35_OTG_SIC_SHIFT;
-
-		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
-			v |= MX35_OTG_PM_BIT;
-
-		if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
-			v |= MX35_OTG_PP_BIT;
-
-		if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW))
-			v |= MX35_OTG_OCPOL_BIT;
-
-		break;
-	case 1: /* H1 port */
-		v &= ~(MX35_H1_SIC_MASK | MX35_H1_PM_BIT | MX35_H1_PP_BIT |
-			MX35_H1_OCPOL_BIT | MX35_H1_TLL_BIT | MX35_H1_USBTE_BIT |
-			MX35_H1_IPPUE_DOWN_BIT | MX35_H1_IPPUE_UP_BIT);
-		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX35_H1_SIC_SHIFT;
-
-		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
-			v |= MX35_H1_PM_BIT;
-
-		if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
-			v |= MX35_H1_PP_BIT;
-
-		if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW))
-			v |= MX35_H1_OCPOL_BIT;
-
-		if (!(flags & MXC_EHCI_TTL_ENABLED))
-			v |= MX35_H1_TLL_BIT;
-
-		if (flags & MXC_EHCI_INTERNAL_PHY)
-			v |= MX35_H1_USBTE_BIT;
-
-		if (flags & MXC_EHCI_IPPUE_DOWN)
-			v |= MX35_H1_IPPUE_DOWN_BIT;
-
-		if (flags & MXC_EHCI_IPPUE_UP)
-			v |= MX35_H1_IPPUE_UP_BIT;
-
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	writel(v, MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
-
-	return 0;
-}
diff --git a/arch/arm/mach-imx/ehci.h b/arch/arm/mach-imx/ehci.h
deleted file mode 100644
index b7ad6175f5bf..000000000000
--- a/arch/arm/mach-imx/ehci.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __MACH_IMX_EHCI_H
-#define __MACH_IMX_EHCI_H
-
-/* values for portsc field */
-#define MXC_EHCI_PHY_LOW_POWER_SUSPEND	(1 << 23)
-#define MXC_EHCI_FORCE_FS		(1 << 24)
-#define MXC_EHCI_UTMI_8BIT		(0 << 28)
-#define MXC_EHCI_UTMI_16BIT		(1 << 28)
-#define MXC_EHCI_SERIAL			(1 << 29)
-#define MXC_EHCI_MODE_UTMI		(0 << 30)
-#define MXC_EHCI_MODE_PHILIPS		(1 << 30)
-#define MXC_EHCI_MODE_ULPI		(2 << 30)
-#define MXC_EHCI_MODE_SERIAL		(3 << 30)
-
-/* values for flags field */
-#define MXC_EHCI_INTERFACE_DIFF_UNI	(0 << 0)
-#define MXC_EHCI_INTERFACE_DIFF_BI	(1 << 0)
-#define MXC_EHCI_INTERFACE_SINGLE_UNI	(2 << 0)
-#define MXC_EHCI_INTERFACE_SINGLE_BI	(3 << 0)
-#define MXC_EHCI_INTERFACE_MASK		(0xf)
-
-#define MXC_EHCI_POWER_PINS_ENABLED	(1 << 5)
-#define MXC_EHCI_PWR_PIN_ACTIVE_HIGH	(1 << 6)
-#define MXC_EHCI_OC_PIN_ACTIVE_LOW	(1 << 7)
-#define MXC_EHCI_TTL_ENABLED		(1 << 8)
-
-#define MXC_EHCI_INTERNAL_PHY		(1 << 9)
-#define MXC_EHCI_IPPUE_DOWN		(1 << 10)
-#define MXC_EHCI_IPPUE_UP		(1 << 11)
-#define MXC_EHCI_WAKEUP_ENABLED		(1 << 12)
-#define MXC_EHCI_ITC_NO_THRESHOLD	(1 << 13)
-
-#define MXC_USBCTRL_OFFSET		0
-#define MXC_USB_PHY_CTR_FUNC_OFFSET	0x8
-#define MXC_USB_PHY_CTR_FUNC2_OFFSET	0xc
-#define MXC_USBH2CTRL_OFFSET		0x14
-
-int mx25_initialize_usb_hw(int port, unsigned int flags);
-int mx31_initialize_usb_hw(int port, unsigned int flags);
-int mx35_initialize_usb_hw(int port, unsigned int flags);
-int mx27_initialize_usb_hw(int port, unsigned int flags);
-
-#endif /* __MACH_IMX_EHCI_H */
-- 
2.17.1




More information about the linux-arm-kernel mailing list