[PATCH 6/7] arm64: dts: ti: k3-*: Use generic adc for node names

[Nishanth Menon]

Use adc@ naming for nodes following standard conventions of device
tree (section 2.2.2 Generic Names recommendation in [1]).

[1] https://github.com/devicetree-org/devicetree-specification/tree/v0.3

Suggested-by: Suman Anna <s-anna at ti.com>
Signed-off-by: Nishanth Menon <nm at ti.com>
---
 arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi         | 4 ++--
 arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
index 51ca4b4d4c21..6dfec68ac865 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
@@ -80,7 +80,7 @@
 		#size-cells = <0>;
 	};
 
-	tscadc0: tscadc at 40200000 {
+	tscadc0: adc at 40200000 {
 		compatible = "ti,am654-tscadc", "ti,am3359-tscadc";
 		reg = <0x0 0x40200000 0x0 0x1000>;
 		interrupts = <GIC_SPI 580 IRQ_TYPE_LEVEL_HIGH>;
@@ -98,7 +98,7 @@
 		};
 	};
 
-	tscadc1: tscadc at 40210000 {
+	tscadc1: adc at 40210000 {
 		compatible = "ti,am654-tscadc", "ti,am3359-tscadc";
 		reg = <0x0 0x40210000 0x0 0x1000>;
 		interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
index 9ad0266598ad..81801f519a61 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
@@ -211,7 +211,7 @@
 		};
 	};
 
-	tscadc0: tscadc at 40200000 {
+	tscadc0: adc at 40200000 {
 		compatible = "ti,am3359-tscadc";
 		reg = <0x0 0x40200000 0x0 0x1000>;
 		interrupts = <GIC_SPI 860 IRQ_TYPE_LEVEL_HIGH>;
@@ -230,7 +230,7 @@
 		};
 	};
 
-	tscadc1: tscadc at 40210000 {
+	tscadc1: adc at 40210000 {
 		compatible = "ti,am3359-tscadc";
 		reg = <0x0 0x40210000 0x0 0x1000>;
 		interrupts = <GIC_SPI 861 IRQ_TYPE_LEVEL_HIGH>;
-- 
2.17.1