[Linux-stm32] [PATCH v7 10/12] ARM: dts: stm32: Fix schema warnings for pwm-leds

Alexander Dahl post at lespocky.de
Sat Oct 31 09:54:09 EDT 2020


Hei hei,

On Tue, Oct 27, 2020 at 11:58:10AM +0100, Ahmad Fatoum wrote:
> Hello,
> 
> On 10/27/20 11:05 AM, Alexander Dahl wrote:
> > Hello Ahmad,
> > 
> > thanks for your feedback, comments below.
> > 
> 
> >>> -	led-rgb {
> >>> +	led-controller-2 {
> >>
> >> Is a single RGB LED really a controller?
> > 
> > I just followed the recommendations by Rob here.
> 
> Do you happen to know if the new multicolor LED support could be used here?
> 
> I find it unfortunate that the device tree loses information relevant to humans
> to adhere to a fixed nomenclature. Apparently led-controller isn't even codified
> in the YAML binding (It's just in the examples). If you respin, please add a
> comment that this is a single RGB led. I'd prefer to keep the information
> in the DTB as well though.

Slightly off-topic, but while I was working on the patch based on your
feedback I tried to find some information on that Linux Automation
MC-1 board.  However I could not find any? Is there some website, some
datasheet or maybe a schematic online?  The vendor prefix says "Linux
Automation GmbH", but I find only that USB-SD-Mux on their page?

Greets
Alex

> 
> 
> 
> > 
> >>>  		compatible = "pwm-leds";
> >>>  
> >>> -		led-red {
> >>> +		led-2 {
> >>
> >> Shouldn't this have been led-1 as well or is the numbering "global" ?
> > 
> > Also good question. This numbering is for dts only, it usually does
> > not correspond with LEDs on the board, so it could be numbered per
> > led-controller as well?
> 
> I'd prefer that it starts by 1. That way it's aligned with PWM channel
> ID.
> 
> Thanks for fixing the dtschema warnings by the way!
> 
> Cheers,
> Ahmad
> 
> > 
> > Greets
> > Alex
> > 
> >>
> >>>  			label = "mc1:red:rgb";
> >>>  			pwms = <&leds_pwm 1 1000000 0>;
> >>>  			max-brightness = <255>;
> >>>  			active-low;
> >>>  		};
> >>>  
> >>> -		led-green {
> >>> +		led-3 {
> >>>  			label = "mc1:green:rgb";
> >>>  			pwms = <&leds_pwm 2 1000000 0>;
> >>>  			max-brightness = <255>;
> >>>  			active-low;
> >>>  		};
> >>>  
> >>> -		led-blue {
> >>> +		led-4 {
> >>>  			label = "mc1:blue:rgb";
> >>>  			pwms = <&leds_pwm 3 1000000 0>;
> >>>  			max-brightness = <255>;
> >>>
> >>
> >> -- 
> >> Pengutronix e.K.                           |                             |
> >> Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
> >> 31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
> >> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
> > 
> 
> -- 
> Pengutronix e.K.                           |                             |
> Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
> 31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

-- 
/"\ ASCII RIBBON | »With the first link, the chain is forged. The first
\ / CAMPAIGN     | speech censured, the first thought forbidden, the
 X  AGAINST      | first freedom denied, chains us all irrevocably.«
/ \ HTML MAIL    | (Jean-Luc Picard, quoting Judge Aaron Satie)
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20201031/ae4f0311/attachment-0001.sig>


More information about the linux-arm-kernel mailing list