[PATCH] arm64: dts: allwinner: beelink-gs1: Enable both RGMII RX/TX delay

[Maxime Ripard]

On Sun, Oct 18, 2020 at 07:24:09PM +0200, Clément Péron wrote:
> Before the commit:
> net: phy: realtek: fix rtl8211e rx/tx delay config
> 
> The software overwrite for RX/TX delays of the RTL8211e were not
> working properly and the Beelink GS1 had both RX/TX delay of RGMII
> interface set using pull-up on the TXDLY and RXDLY pins.
> 
> Now that these delays are working properly they overwrite the HW
> config and set this to 'rgmii' meaning no delay on both RX/TX.
> This makes the ethernet of this board not working anymore.
> 
> Set the phy-mode to 'rgmii-id' meaning RGMII with RX/TX delays
> in the device-tree to keep the correct configuration.
> 
> Fixes: 089bee8dd119 ("arm64: dts: allwinner: h6: Introduce Beelink GS1 board")
> Signed-off-by: Clément Péron <peron.clem at gmail.com>

Fixed the commit ID and queued as a fix for 5.10

Maxime
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20201022/502bab68/attachment-0001.sig>