[PATCH v5 2/3] iommu/arm-smmu-qcom: Read back stream mappings

[Robin Murphy]

On 2020-10-19 19:23, Bjorn Andersson wrote:
> The Qualcomm boot loader configures stream mapping for the peripherals
> that it accesses and in particular it sets up the stream mapping for the
> display controller to be allowed to scan out a splash screen or EFI
> framebuffer.
> 
> Read back the stream mappings during initialization and make the
> arm-smmu driver maintain the streams in bypass mode.

Acked-by: Robin Murphy <robin.murphy at arm.com>

> Signed-off-by: Bjorn Andersson <bjorn.andersson at linaro.org>
> ---
> 
> Changes since v4:
> - Don't increment s2cr[i]->count, as this is not actually needed to survive
>    probe deferral
> 
>   drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 23 ++++++++++++++++++++++
>   1 file changed, 23 insertions(+)
> 
> diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
> index be4318044f96..48627fcf6bed 100644
> --- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
> +++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
> @@ -23,6 +23,28 @@ static const struct of_device_id qcom_smmu_client_of_match[] __maybe_unused = {
>   	{ }
>   };
>   
> +static int qcom_smmu_cfg_probe(struct arm_smmu_device *smmu)
> +{
> +	u32 smr;
> +	int i;
> +
> +	for (i = 0; i < smmu->num_mapping_groups; i++) {
> +		smr = arm_smmu_gr0_read(smmu, ARM_SMMU_GR0_SMR(i));
> +
> +		if (FIELD_GET(ARM_SMMU_SMR_VALID, smr)) {
> +			smmu->smrs[i].id = FIELD_GET(ARM_SMMU_SMR_ID, smr);
> +			smmu->smrs[i].mask = FIELD_GET(ARM_SMMU_SMR_MASK, smr);
> +			smmu->smrs[i].valid = true;
> +
> +			smmu->s2crs[i].type = S2CR_TYPE_BYPASS;
> +			smmu->s2crs[i].privcfg = S2CR_PRIVCFG_DEFAULT;
> +			smmu->s2crs[i].cbndx = 0xff;
> +		}
> +	}
> +
> +	return 0;
> +}
> +
>   static int qcom_smmu_def_domain_type(struct device *dev)
>   {
>   	const struct of_device_id *match =
> @@ -61,6 +83,7 @@ static int qcom_smmu500_reset(struct arm_smmu_device *smmu)
>   }
>   
>   static const struct arm_smmu_impl qcom_smmu_impl = {
> +	.cfg_probe = qcom_smmu_cfg_probe,
>   	.def_domain_type = qcom_smmu_def_domain_type,
>   	.reset = qcom_smmu500_reset,
>   };
>