[PATCH 5/5] arm64: dts: imx8mn: Add node for SPDIF

[Adam Ford]

The i.MX8M Nano can support SPDIF which is compatible to the
IP used on the i.MX35.

Add the node.

Signed-off-by: Adam Ford <aford173 at gmail.com>

diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index 3ab9486736ca..4b32c5aa355d 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -334,6 +334,30 @@ micfil: micfil at 30080000 {
 					status = "disabled";
 				};
 
+				spdif1: spdif at 30090000 {
+					compatible = "fsl,imx35-spdif";
+					reg = <0x30090000 0x10000>;
+					interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MN_CLK_AUDIO_AHB>, /* core */
+						 <&clk IMX8MN_CLK_24M>, /* rxtx0 */
+						 <&clk IMX8MN_CLK_SPDIF1>, /* rxtx1 */
+						 <&clk IMX8MN_CLK_DUMMY>, /* rxtx2 */
+						 <&clk IMX8MN_CLK_DUMMY>, /* rxtx3 */
+						 <&clk IMX8MN_CLK_DUMMY>, /* rxtx4 */
+						 <&clk IMX8MN_CLK_AUDIO_AHB>, /* rxtx5 */
+						 <&clk IMX8MN_CLK_DUMMY>, /* rxtx6 */
+						 <&clk IMX8MN_CLK_DUMMY>, /* rxtx7 */
+						 <&clk IMX8MN_CLK_DUMMY>; /* spba */
+					clock-names = "core", "rxtx0",
+						      "rxtx1", "rxtx2",
+						      "rxtx3", "rxtx4",
+						      "rxtx5", "rxtx6",
+						      "rxtx7", "spba";
+					dmas = <&sdma2 28 18 0>, <&sdma2 29 18 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
 				sai7: sai at 300b0000 {
 					compatible = "fsl,imx8mq-sai",
 						     "fsl,imx6sx-sai";
-- 
2.25.1