[PATCH] arm64: dts: imx8mm-beacon-som: Configure supplies on secondary cpus
Adam Ford
aford173 at gmail.com
Wed Oct 7 10:04:57 EDT 2020
Each cpu core should have a corresponding supply, but only cpu0 does.
This patch adds a supply for each of the secondary cpus.
Signed-off-by: Adam Ford <aford173 at gmail.com>
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
index b88c3c99b007..397cf8b2f29b 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
@@ -24,6 +24,18 @@ &A53_0 {
cpu-supply = <&buck2_reg>;
};
+&A53_1 {
+ cpu-supply = <&buck2_reg>;
+};
+
+&A53_2 {
+ cpu-supply = <&buck2_reg>;
+};
+
+&A53_3 {
+ cpu-supply = <&buck2_reg>;
+};
+
&ddrc {
operating-points-v2 = <&ddrc_opp_table>;
--
2.25.1
More information about the linux-arm-kernel
mailing list