[PATCH] arm64: tegra: Fix GIC400 missing GICH/GICV register regions
Marc Zyngier
maz at kernel.org
Mon Oct 5 09:32:56 EDT 2020
GIC400 has full support for virtualization, and yet the tegra186
DT doesn't expose the GICH/GICV regions (despite exposing the
maintenance interrupt that only makes sense for virtualization).
Add the missing regions, based on the hunch that the HW doesn't
use the CPU build-in interfaces, but instead the external ones
provided by the GIC. KVM's virtual GIC now works with this change.
Signed-off-by: Marc Zyngier <maz at kernel.org>
---
arch/arm64/boot/dts/nvidia/tegra186.dtsi | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
index 8eb61dd9921e..fd44545e124d 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
@@ -630,7 +630,9 @@ gic: interrupt-controller at 3881000 {
#interrupt-cells = <3>;
interrupt-controller;
reg = <0x0 0x03881000 0x0 0x1000>,
- <0x0 0x03882000 0x0 0x2000>;
+ <0x0 0x03882000 0x0 0x2000>,
+ <0x0 0x03884000 0x0 0x2000>,
+ <0x0 0x03886000 0x0 0x2000>;
interrupts = <GIC_PPI 9
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
interrupt-parent = <&gic>;
--
2.28.0
More information about the linux-arm-kernel
mailing list