[v4 07/11] arm64: dts: ls208xa: add DT node for external interrupt lines

Biwen Li biwen.li at oss.nxp.com
Mon Nov 30 05:15:11 EST 2020


From: Biwen Li <biwen.li at nxp.com>

Add device-tree node for external interrupt lines IRQ0-IRQ11.

Signed-off-by: Biwen Li <biwen.li at nxp.com>
---
Change in v4:
	- none

Change in v3:
	- none

Change in v2:
	- none

 .../arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 33 ++++++++++++++++++-
 1 file changed, 32 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index bf72918fe545..4fdbc6468ce0 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -3,7 +3,7 @@
  * Device Tree Include file for Freescale Layerscape-2080A family SoC.
  *
  * Copyright 2016 Freescale Semiconductor, Inc.
- * Copyright 2017 NXP
+ * Copyright 2017-2020 NXP
  *
  * Abhimanyu Saini <abhimanyu.saini at nxp.com>
  *
@@ -277,6 +277,37 @@
 			little-endian;
 		};
 
+		isc: syscon at 1f70000 {
+			compatible = "fsl,ls2080a-isc", "syscon";
+			reg = <0x0 0x1f70000 0x0 0x10000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x1f70000 0x10000>;
+
+			extirq: interrupt-controller at 14 {
+				compatible = "fsl,ls2080a-extirq", "fsl,ls1088a-extirq";
+				#interrupt-cells = <2>;
+				#address-cells = <0>;
+				interrupt-controller;
+				reg = <0x14 4>;
+				interrupt-map =
+					<0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+					<1 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+					<2 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+					<3 0 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+					<4 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+					<5 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+					<6 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					<7 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+					<8 0 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					<9 0 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+					<10 0 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+					<11 0 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-map-mask = <0xffffffff 0x0>;
+			};
+		};
+
 		tmu: tmu at 1f80000 {
 			compatible = "fsl,qoriq-tmu";
 			reg = <0x0 0x1f80000 0x0 0x10000>;
-- 
2.17.1




More information about the linux-arm-kernel mailing list