[GIT PULL 3/5] Broadcom devicetree changes for 5.11
Florian Fainelli
f.fainelli at gmail.com
Sat Nov 28 11:34:08 EST 2020
The following changes since commit 3650b228f83adda7e5ee532e2b90429c03f7b9ec:
Linux 5.10-rc1 (2020-10-25 15:14:11 -0700)
are available in the Git repository at:
https://github.com/Broadcom/stblinux.git tags/arm-soc/for-5.11/devicetree
for you to fetch changes up to f722fbac1e533ea1fe750d99d09c244efff59d59:
Merge tag 'tags/bcm2835-dt-next-2020-11-20' into devicetree/next (2020-11-20 19:14:01 -0800)
----------------------------------------------------------------
This pull request contains Broadcom ARM-based SoCs changes for 5.11,
please pull the following:
- Vivek updates the Linksys EA9500 DTS by adding the two additional
switch port nodes (5 & 7), providing a flash partition layout to
make the device usable with OpenWrt, and finally switches to using
the pin controller rather than using mdio-mux to get the same outcome.
- Serge fixes the USB Device Tree nodes unit name to be conformant to
the recommended name patterns.
- Rafal re-arranges all the nodes that belonged to the CRU block to be
under the CRU node (such as PLLs). He also disables the USB3 PHY node
for devices that lack USB3 and adds USB3 support to the Luxul XWR-3150
DTS.
- Jonathan drops the incorrect 'io-channel-ranges' from the Cygnus SoC
DTSI.
- Maxime disables the Wi-Fi frequencies (around 2.4GHz) for HDMI on the
Raspberry Pi 4 due to some cross-talk between the two blocks.
- Pavel updates the DWC2 USB controller RX FIFO sizes to be more
accurate for all BCM283x (Raspberr Pi) SoCs.
- Florian updates all BCM5301x and NSP Device Tree files to allow
switching the Broadcom B53 Ethernet switch device tree binding to YAML.
----------------------------------------------------------------
Florian Fainelli (10):
dt-bindings: net: dsa: Extend switch nodes pattern
dt-bindings: net: dsa: Document sfp and managed properties
ARM: dts: BCM5301X: Update Ethernet switch node name
ARM: dts: BCM5301X: Add a default compatible for switch node
ARM: dts: BCM5301X: Provide defaults ports container node
ARM: dts: NSP: Update ethernet switch node name
ARM: dts: NSP: Fix Ethernet switch SGMII register name
ARM: dts: NSP: Add a SRAB compatible string for each board
ARM: dts: NSP: Provide defaults ports container node
Merge tag 'tags/bcm2835-dt-next-2020-11-20' into devicetree/next
Jonathan Cameron (1):
ARM: dts: Cygnus: Drop incorrect io-channel-ranges property.
Kurt Kanzenbach (1):
dt-bindings: net: dsa: b53: Add YAML bindings
Maxime Ripard (1):
ARM: dts: rpi-4: disable wifi frequencies
Pavel Hofman (1):
ARM: dts: bcm283x: increase dwc2's RX FIFO size
Rafał Miłecki (3):
ARM: dts: BCM5301X: Move CRU devices to the CRU node
ARM: dts: BCM5301X: Disable USB 3 PHY on devices without USB 3
ARM: dts: BCM5301X: Enable USB 3 PHY on Luxul XWR-3150
Serge Semin (2):
ARM: dts: BCM5301X: Harmonize EHCI/OHCI DT nodes name
ARM: dts: BCM5310X: Harmonize xHCI DT nodes name
Vivek Unune (4):
ARM: dts: BCM5301X: Linksys EA9500 add port 5 and port 7
ARM: dts: BCM5301X: Linksys EA9500 add fixed partitions
ARM: dts: BCM5301X: Use corretc pinctrl compatible for 4709x
ARM: dts: BCM5301X: Linksys EA9500 make use of pinctrl
Documentation/devicetree/bindings/net/dsa/b53.txt | 149 ------------
.../devicetree/bindings/net/dsa/brcm,b53.yaml | 249 +++++++++++++++++++++
Documentation/devicetree/bindings/net/dsa/dsa.yaml | 6 +-
MAINTAINERS | 2 +-
arch/arm/boot/dts/bcm-cygnus.dtsi | 1 -
arch/arm/boot/dts/bcm-nsp.dtsi | 8 +-
arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 2 +
arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi | 2 +-
arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi | 2 +-
arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts | 7 -
arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts | 7 -
arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts | 3 -
arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 4 -
arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts | 7 -
arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts | 7 -
arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts | 4 -
arch/arm/boot/dts/bcm4709.dtsi | 4 +
arch/arm/boot/dts/bcm47094-linksys-panamera.dts | 94 +++++---
arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts | 3 -
arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts | 3 -
arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 3 -
arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts | 7 +-
arch/arm/boot/dts/bcm47094.dtsi | 13 ++
arch/arm/boot/dts/bcm5301x.dtsi | 67 +++---
arch/arm/boot/dts/bcm53573.dtsi | 4 +-
arch/arm/boot/dts/bcm953012er.dts | 3 -
arch/arm/boot/dts/bcm958522er.dts | 4 +
arch/arm/boot/dts/bcm958525er.dts | 4 +
arch/arm/boot/dts/bcm958525xmc.dts | 4 +
arch/arm/boot/dts/bcm958622hr.dts | 3 -
arch/arm/boot/dts/bcm958623hr.dts | 3 -
arch/arm/boot/dts/bcm958625hr.dts | 3 -
arch/arm/boot/dts/bcm958625k.dts | 3 -
arch/arm/boot/dts/bcm988312hr.dts | 3 -
34 files changed, 405 insertions(+), 283 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/net/dsa/b53.txt
create mode 100644 Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
More information about the linux-arm-kernel
mailing list