[PATCH v2 0/4] arm64: dts: ti: J7200 GPIO support and warning fixes

[Grygorii Strashko]

On 17/11/2020 18:19, Sekhar Nori wrote:
> These patches add gpio support for TI's J7200 platform. The first
> two patches fix existing warnings in preparation for adding GPIO
> support.
> 
> Changes in v2:
> - Add patches fixing existing warnings so GPIO support does not
>    end up adding more warnings
> - Addressed Nishanth's comments on GPIO patches
>    - merge patches adding main and wakeup domain GPIOs into single patch
>    - fix commit description going over 75 chars
>    - fix W=2 warnings about lack of #address-cells in GPIO nodes


> 
> Faiz Abbas (2):
>    arm64: dts: ti: k3-j7200: Add gpio nodes
>    arm64: dts: ti: k3-j7200-common-proc-board: Disable unused gpio
>      modules
> 
> Sekhar Nori (2):
>    arm64: dts: ti: k3: squelch warning about lack of #interrupt-cells
>    arm64: dts: ti: k3: squelch warnings regarding no #address-cells for
>      interrupt-controller
> 
>   arch/arm64/boot/dts/ti/k3-am65-main.dtsi      |  6 ++
>   arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi    |  2 +
>   .../arm64/boot/dts/ti/k3-am654-base-board.dts |  1 +
>   .../dts/ti/k3-j7200-common-proc-board.dts     | 16 ++++
>   arch/arm64/boot/dts/ti/k3-j7200-main.dtsi     | 75 +++++++++++++++++++
>   .../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi      | 35 +++++++++
>   .../dts/ti/k3-j721e-common-proc-board.dts     |  1 +
>   arch/arm64/boot/dts/ti/k3-j721e-main.dtsi     | 12 +++
>   .../boot/dts/ti/k3-j721e-mcu-wakeup.dtsi      |  3 +
>   9 files changed, 151 insertions(+)
> 

For patches 1,3,4
Reviewed-by: Grygorii Strashko <grygorii.strashko at ti.com>
-- 
Best regards,
grygorii