[PATCH 0/5] Add some clocks support for i.MX8qxp DC0/MIPI-LVDS subsystems
Aisheng Dong
aisheng.dong at nxp.com
Wed Nov 18 05:31:57 EST 2020
> From: Ying Liu <victor.liu at nxp.com>
> Sent: Wednesday, November 18, 2020 4:31 PM
>
> This patch set adds some clocks support for i.MX8qxp DC0/MIPI-LVDS
> subsystems, which includes some SCU controlled clocks and some LPCG clocks.
>
> With this patch set, some basic clocks for i.MX8qxp LVDS displays can be got by
> drivers.
>
> This patch set follows the legacy/deprecated way to add the clocks support in
> clock drivers instead of the new 'two cells' dt-binding way. The reason behind
> this is that the existing i.MX8qxp SoC device tree is using the legacy way(no
> conversion effort is seen) and there is not i.MX8qm(with a similar
> architecture) SoC device tree for us to enable display yet.
Hi Ying,
Please don't do this.
You know the legacy clock binding will be removed and not used anymore.
Regards
Aisheng
>
> Liu Ying (5):
> clk: imx: clk-imx8qxp: Add SCU clocks support for DC0 PLL clocks
> clk: imx: clk-imx8qxp-lpcg: Add display controller LPCG clocks support
> clk: imx: clk-imx8qxp: Add some SCU clocks support for MIPI-LVDS
> subsystems
> dt-bindings: clock: imx8qxp-lpcg: Add compatibles for MIPI-LVDS
> subsystems
> clk: imx: clk-imx8qxp-lpcg: Add some LPCG clocks support for MIPI-LVDS
> subsystems
>
> .../devicetree/bindings/clock/imx8qxp-lpcg.yaml | 2 +
> drivers/clk/imx/clk-imx8qxp-lpcg.c | 79
> ++++++++++++++++++++++
> drivers/clk/imx/clk-imx8qxp-lpcg.h | 29 ++++++++
> drivers/clk/imx/clk-imx8qxp.c | 12 ++++
> include/dt-bindings/clock/imx8-clock.h | 61
> +++++++++++++++++
> 5 files changed, 183 insertions(+)
>
> --
> 2.7.4
More information about the linux-arm-kernel
mailing list