[PATCH] arm64: dts: freescale: sl28: combine SPI MTD partitions

[Michael Walle]

The upstream port, doesn't really follow the vendor partitioning. The
bootloader partition has one U-Boot FIT image containing all needed
bits and pieces. Even today the bootloader is already larger than the
current "bootloader" partition. Thus, fold all the partitions into one
and keep the environment one. The latter is still valid.
We keep the failsafe partitions because the first half of the SPI flash
is preinstalled by the vendor and immutable.

Fixes: 815364d0424e ("arm64: dts: freescale: add Kontron sl28 support")
Signed-off-by: Michael Walle <michael at walle.cc>
---
 .../boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts  | 12 +-----------
 1 file changed, 1 insertion(+), 11 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
index 54ff6f7c2477..fbaecf285d05 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
@@ -159,20 +159,10 @@
 		};
 
 		partition at 210000 {
-			reg = <0x210000 0x0f0000>;
+			reg = <0x210000 0x1d0000>;
 			label = "bootloader";
 		};
 
-		partition at 300000 {
-			reg = <0x300000 0x040000>;
-			label = "DP firmware";
-		};
-
-		partition at 340000 {
-			reg = <0x340000 0x0a0000>;
-			label = "trusted firmware";
-		};
-
 		partition at 3e0000 {
 			reg = <0x3e0000 0x020000>;
 			label = "bootloader environment";
-- 
2.20.1